SPECIAL NOTICE
52 -- Petroleum Gage Stick - RFQ
- Notice Date
- 2/5/2013
- Notice Type
- Special Notice
- NAICS
- 332216
— Saw Blade and Handtool Manufacturing
- Contracting Office
- General Services Administration, Federal Acquisition Service (FAS), FMHAC & HSOC, 1500 East Bannister Road, Kansas City, Missouri, 64131, United States
- ZIP Code
- 64131
- Solicitation Number
- 5210013092055
- Archive Date
- 2/27/2013
- Point of Contact
- Marianne Schrik, Phone: 8168231860
- E-Mail Address
-
marianne.schrik@gsa.gov
(marianne.schrik@gsa.gov)
- Small Business Set-Aside
- N/A
- Description
- RFQ 5210-01-309-2055 UI: EA Quantity - 1 GAGE STICK, PETROLEUM: DESCRIPTION The overall length of the gauge stick shall be 78-1/2 inch. The gage stick may be constructed of two pieces that are joined together with a sleeve and locking device consisting of a bullet catch for locking and unlocking the two sections. The gauge stick shall be made of seasoned hardwood with a thickness of 5/8 to 1 inch and width of 3/4 to 1-1/8 inch, or aluminum tubing with a 1/8 inch minimum wall thickness. The gauge stick shall have a nonsparking end cap on the low graduated end. The hardwood sticks shall be coated to prevent degradation. The coating shall not cause contamination of the petroleum liquid being measured. Measures up to 7729 gallons in 50 gal increments; measures up to 61824.82 pints in 211.34 pints increments; the gauge stick shall be permanently and legibly graduated the full length.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/eae94f1b54641364e67927f8df3db11d)
- Place of Performance
- Address: Continental United States, United States
- Record
- SN02979371-W 20130207/130205233955-eae94f1b54641364e67927f8df3db11d (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |