Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
FBO DAILY - FEDBIZOPPS ISSUE OF JANUARY 27, 2013 FBO #4082
SOURCES SOUGHT

48 -- Ball Valve Assembly

Notice Date
1/25/2013
 
Notice Type
Sources Sought
 
NAICS
332911 — Industrial Valve Manufacturing
 
Contracting Office
Department of the Air Force, Air Force Materiel Command, AEDC - Arnold Engineering Development Center, 100 Kindel Drive, Suite A-335, Arnold AFB, Tennessee, 37389-1335
 
ZIP Code
37389-1335
 
Solicitation Number
RFI-AEDC-13-0012
 
Point of Contact
Burnice D. Banaszak, Phone: 9314546209
 
E-Mail Address
burnice.banaszak@arnold.af.mil
(burnice.banaszak@arnold.af.mil)
 
Small Business Set-Aside
N/A
 
Description
Solicitation: Agency Office: RFI-AEDC-13-0012 Air Force Material Command Location: AEDC - Arnold Engineering Development Complex Title: Ball Valve Assembly Description(s): THIS IS A SOURCES SOUGHT NOTICE ONLY. This sources sought does not constitute an Invitation for Bids, Request for Proposals, nor a Request for Quotations, and is not to be construed as a commitment by the government to issue a contract or otherwise pay for the information solicited. The purpose of this sources sought synopsis is to identify potential businesses having the capability to provide refurbished/remanufactured from salvage back to original manufacturer's specifications or new Valve Assembly meeting the below salient features; Material: (A) Body: A487 Grade 4C carbon steel (B) PEEKTM seat seal inserts in 410 stainless seat spools (C) Electroless nickel plated ball and trim Configuration: (A) Top entry, one piece body (B) Grayloc H72 ring size hub ends, 33" face to face takeout length (C) Full trunnion (top and bottom) support of ball with redundant stem seals. Solid one piece ball trunnion design (D) Bi-directional, pressure-assisted seat belts. (E) Pneumatic, spring return, fail closed, with 24 volt limit switch. BETTIS model G4024 SR2, fail CW, standard temperature Service Conditions: (A) Media: Compressed Air (B) Maximum design pressure: 4400 psig a) Maximum inlet pressure: 4400 psig b) Minimum outlet pressure: 0 psig c) Maximum outlet pressure: 4400 psig (C) Operating Temperature Range: -20o to 110 o F (D) Known contaminants: low concentrations of 20μm iron oxide (fine rust particles), alumina, calcium and silica. Valve Design: (A) Valve body shall be 2500 # Class in accordance with ANSI B16.34 (B) Leakage shall be in accordance with ASME B16.104 Class V or lower. The maximum allowable through leakage is 50 SCFM per foot of nominal diameter under all operating conditions (C) Valve shall be factory tested to verify compliance with pressure rating per ASME B16.34 and B16.104 Cleaning: All parts to be visually clean, except for lubricant applied as intended per the manufacturers design. All interested parties who believe they can meet the above requirements are invited to submit in writing a complete information package describing their capabilities to provide this Ball Valve Assembly, to include any cut-sheet drawings and material Bill of Material (BOM) Please include your company name, point of contact, address, telephone number, Duns & Bradstreet Unique Numbering System (DUNS) number, and Commercial and Government Entity (CAGE) code. Please identify your firm's small business status and category (i.e. Small Business, Woman Owned Small Business, HUBZone, Service Disabled Veteran Owned Small Business, 8(a), etc.). The North American Industry Classification System (NAICS) code for this work is 332911. The small business size standard is 500 or less employees. Potential offerors must be registered in SAM to be eligible for payment from any Department of Defense activity. Information on registration and annual confirmation requirements may be obtained at www.SAM.gov. All respondents that can provide any of the requested information should reply in writing (electronic responses) no later than 15 days from the date of this publication to the contract specialist, Burnice Banaszak at burnice.banaszak@arnold.af.mil Please note that the Government will not pay for any information submitted in response to this announcement.
 
Web Link
FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/AFMC/AEDC/RFI-AEDC-13-0012/listing.html)
 
Place of Performance
Address: AEDC, Arnold Air Force Base, Arnold AFB, Tennessee, 37389, United States
Zip Code: 37389
 
Record
SN02972891-W 20130127/130125234705-63f84a3d318fca7f84c926d1905e4196 (fbodaily.com)
 
Source
FedBizOpps Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  Jenny in Wanderland!  © 1994-2024, Loren Data Corp.