FBODaily.com | FedBizOpps: PRESOL | 45 | PLUMBING SUPPLIES

FBO DAILY - FEDBIZOPPS ISSUE OF JANUARY 12, 2013 FBO #4067
SOLICITATION NOTICE

45 -- PLUMBING SUPPLIES

Notice Date: 1/10/2013
Notice Type: Combined Synopsis/Solicitation
Contracting Office: PO BOX 620, Code 7810, Grand Coulee, WA 99113
ZIP Code: 99113
Solicitation Number: R13PS17205
Response Due: 1/17/2013
Archive Date: 7/16/2013
Point of Contact: Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
E-Mail Address: Clientservices@fedbid.com;
Small Business Set-Aside: Total Small Business
Description: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is R13PS17205 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-63. The associated North American Industrial Classification System (NAICS) code for this procurement is 332913 with a small business size standard of 500.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2013-01-17 16:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be GRAND COULEE, WA 99133 The Bureau of Reclamation requires the following items, Brand Name or Equal, to the following: LI 001, COUPLING, PIPE, GROOVED, 1-1/2 INCH, DUCTILE IRON, 1-1/2 INCH FLEXIBLE GROOVED COUPLING, STYLE 77, HOUSING OF DUCTILE IRON CONFORMING TO ASTM A-536, GRADE 65-45-12, DESIGNED WITH CROSS RIBBED CONSTRUCTION, TWO PIECE HOUSING DESIGN, OUTSIDE DIAMETER 1.900 INCHES, 1000 PSI, PROVIDED WITH PLATED NUTS AND BOLTS, COMES WITH GRADE "E" EPDM - C SHAPED GASKET, GASKET WITH TEMP RANGE MINUS 30 F TO 230F, VICTAULIC NO. L014077PE0, OR EQUAL., 11, EA; LI 002, COUPLING, PIPE, GROOVED, 2 INCH, DUCTILE IRON, 2 INCH FLEXIBLE GROOVED COUPLING, STYLE 77, HOUSING OF DUCTILE IRON CONFORMING TO ASTM A-536, GRADE 65-45-12, DESIGNED WITH CROSS RIBBED CONSTRUCTION, TWO PIECE HOUSING DESIGN, OUTSIDE DIAMETER 2.375 INCHES, 1000 PSI, PROVIDED WITH PLATED NUTS AND BOLTS, COMES WITH GRADE "E" EPDM - C SHAPED GASKET, GASKET WITH TEMP RANGE -30 F -TO +230F, VICTAULIC NO. L02077PE0, OR EQUAL., 11, EA; LI 003, COUPLING, PIPE, GROOVED, 2-1/2 INCH, DUCTILE IRON, 2-1/2 INCH FLEXIBLE GROOVED COUPLING, STYLE 77, HOUSING OF DUCTILE IRON CONFORMING TO ASTM A-536, GRADE 65-45-12, DESIGNED WITH CROSS RIBBED CONSTRUCTION, TWO PIECE HOUSING DESIGN, OUTSIDE DIAMETER 2.875 INCHES, 1000 PSI, PROVIDED WITH PLATED NUTS AND BOLTS, COMES WITH GRADE "E" EPDM - C SHAPED GASKET, GASKET WITH TEMP RANGE -30 F -TO +230F, VICTAULIC NO. L024077PE0, OR EQUAL., 11, EA; LI 004, GAUGE, PRESSURE, 0-60 PSI, 4-1/2 INCH DIAL, 30-0 IN MERCURY VACUUM, 1/4 INCH BACK CONNECTED, CASE TYPE 1279, BOURDON SYSTEM CODE-A, ASHCROFT NO. 45-1279-A-02B-30/60, OR EQUAL., 2, EA; LI 005, PIPE, PLASTIC (PVC), 1.315 OD, 0.935 INCH ID, SLOTTED, WHITE, SCHEDULE 80,.020 INCH STANDARD SLOT OPENING, SLOTTED BOTH SIDES, 3/16 INCH SLOT SPACING, THREADED BOTH ENDS, 8 THREADS PER INCH, ONE MALE THE OTHER FEMALE WITH SQUARE FLUSH JOINT THREADS, O-RING INCLUDED, FOR WATER WELL USE, 1270 PSI COLLAPSE PRESSURE, 315 PSI BURST PRESSURE, 727 LBS TENSILE STRENGTH, 10 FOOT LENGTHS, JOHNSON SCREEN NO.252420, OR EQUAL., 60, LG; LI 006, COUPLING, HOSE, STEEL, 1/4 INCH, ZINC PLATED, QUICK DISCONNECT, MALE PLUG TO MALE PIPE THREAD, END CONNECTION, HANSEN SERIES 3000 PART NO. 10, AMFLO NO. CP21, OR EQUAL., 150, EA; LI 007, VALVE, GATE, STEEL, 125 LBS, 4 INCH IPS BODY, BRASS TRIM, OUTSIDE SCREW AND YOKE, RISING STEM, 9 INCH FACE TO FACE, FLANGED, DSI NO. 0405, OR EQUAL., 2, EA; LI 008, TEE, PIPE, 3/4 INCH, BLACK MALLEABLE IRON, STRAIGHT, 150 LB CLASS, ANSI B16.3., 15, EA; LI 009, ELBOW, PIPE, 90 3/4 INCH IPS, STRAIGHT, GALVANIZED MALLEABLE IRON, 150 LB CLASS, BANDED, ANSI B16.3., 25, EA; LI 010, ELBOW, TUBE, 45 3/4 INCH, SOLDER JOINT, WROUGHT COPPER, STRAIGHT, FEMALE COPPER TO COPPER., 15, EA; LI 011, VALVE, GATE, CAST IRON BODY, 3 INCH IPS, 200 PSI WOG, CLASS 125, FLANGED ENDS, EXTERNAL (RISING) STEM AND YOKE, BRASS TRIM, FAIRBANKS NO.0405, OR MILWAUKEE NO. F-2885, OR EQUAL., 4, EA; LI 012, VALVE, PRESSURE REGULATING, 300 LB WOG, 3/8 INCH FEMALE IPT, BRASS OR BRONZE CONSTRUCTION, SPRING LOADED REMOVEABLE COMPOSITION DIAPHRAGM TYPE WITH A REMOVEABLE COMPOSITION DISC AND STAINLESS STEEL OR BRONZE SEAT RING, REDUCTION TO BE ADJUSTABLE FROM 30 TO 300 PSI, CLAYTON NO. CRD, OR EQUAL., 2, EA; LI 013, ELBOW, PIPE, 90 DEGREE, 2 INCH IPS, STRAIGHT, GALVANIZED MALLEABLE IRON, 150 LB CLASS, BANDED, ANSI B16.3., 24, EA; LI 014, PLUG, PIPE, 1 INCH, GALVANIZED MALLEABLE IRON, 150 LBS CLASS, CORED SQUARE HEAD, 150 LB CLASS, ANSI B16.3., 20, EA; LI 015, PLUG, PIPE, 1 INCH, GALVANIZED MALLEABLE IRON, COUNTERSINK HEAD, SOLID, 150 LB CLASS, ANSI B16.11., 4, EA; LI 016, COUPLING, PIPE, 3/4 X 3/8 INCH, BELL REDUCING, GALVANIZED, THREADED, MALLEABLE IRON, 150 LB CLASS, ANSI B16.3., 10, EA; LI 017, TUBING, SS, 1/2 INCH OD X.065 INCH WALL THICKNESS, TYPE 304, FURNISHED IN 20 FOOT LENGTHS., 2, LG; LI 018, TEE, WROUGHT COPPER, 1/2 INCH, COPPER TO COPPER, SOLDER JOINT, STRAIGHT, GRINNELL NO. 9111, OR EQUAL., 25, EA; LI 019, COUPLING, PIPE 1/2 X 1/4 INCH. BELL REDUCING, GALVANIZED, THREADED, MALLEABLE IRON, 150 LB CLASS, ANSI B16.3., 25, EA; LI 020, UNION, PIPE, 1/2 INCH, BLACK MALLEABLE IRON, 150 POUNDS PER SQUARE INCH, 1.735 INCHS LONG, GROUND JOINT SEAT TYPE IS COPPER ALLOY., 10, EA; LI 021, UNION, PIPE, 3/8 INCH, BLACK MALLEABLE IRON, STANDARD WEIGHT, 150 PSI., 5, EA; LI 022, BUSHING, PIPE, 3/4 X 3/8 INCH, BRASS, 3/4 INCH MALE TO 3/8 INCH FEMALE, 1200 PSI OPERATING PRESSURE, WEATHERHEAD NO.3220X12X6, OR EQUAL., 10, EA; LI 023, ELBOW, PIPE, 45 DEGREE, 1 INCH IPS, STRAIGHT, GALVANIZED MALLEABLE IRON, 150 LB CLASS, BANDED, ANSI B16.3., 10, EA; LI 024, COUPLING, PIPE, 3/4 INCH, GALVANIZED, THREADED, MALLEABLE IRON, 150 LB CLASS, BANDED, ANSI B16.3., 40, EA; LI 025, COUPLING, PIPE, 2 X 1-1/4 INCH, BELL REDUCING, GALVANIZED, THREADED, MALLEABLE IRON, 150 LB CLASS, ANSI B16.3., 2, EA; LI 026, GAUGE, PRESSURE 0-200 PSI, 4-1/2 INCH DIAL, 1/4 INCH MALE IPT, BOTTOM CONNECTED, DUPLEX, ROTARY GEAR DESIGN, ASHCROFT NO. 451038A02L200, OR EQUAL., 2, EA; LI 027, ELBOW, WROUGHT COPPER, 90 DEGREE, 2 INCH, CLOSE ROUGH, COPPER TO COPPER, FEMALE SOLDER CUP X FEMALE SOLDER CUP, NIBCO NO. 607, OR EQUAL., 12, EA; LI 028, NIPPLE, PIPE, 1/4 X 2 INCH, BLACK STEEL, SCHEDULE 40, WELDED, ASTM A-120. COUNTRY OF ORIGIN:_______________________., 25, EA; LI 029, NIPPLE, PIPE, 1/4 X 2-1/2 INCH, BLACK STEEL, SCHEDULE 40, WELDED, ASTM A-120. COUNTRY OF ORIGIN:__________________., 25, EA; LI 030, NIPPLE, PIPE, 1/4 IPS X 4 INCH, BLACK STEEL, SCHEDULE 40, WELDED, ASTM A-120. COUNTRY OF ORIGIN:___________________., 6, EA; LI 031, TEE, PIPE, 1 INCH, GALVANIZED, MALLEABLE IRON, STRAIGHT, THREADED, 150 LB CLASS, BANDED, ANSI B16.3., 24, EA; LI 032, UNION, PIPE, 1 INCH, GALVANIZED, MALLEABLE IRON WITH BRASS OR BRONZE SEAT, 150 LBS PSI., 20, EA; LI 033, GAUGE, PRESSURE, 0-100 PSI, 4-1/2 INCH DIAL, 1/4 INCH BACK CONNECTED, ASHCROFT NO. 45-1279A-02B, OR EQUAL., 2, EA; LI 034, CLAMP, HOSE, STEEL, FITS 1/4 - 5/8 INCH HOSE, SAE SIZE 4, CORROSION RESISTANT BAND, WORM GEAR SCREW (SLOTTED HEAT) ADJUSTING MECHANISM, IDEAL NO. 6202, OR EQUAL., 100, EA; LI 035, VALVE, PRESSURE, LIQUID RELIEF, 30 PSI, 1 INCH IPS, 1 INCH INLET SIZE, 316 SS SPRING, BRONZE WITH PRESSURE TIGHT CAP, ADJUSTABLE COMPRESSION SCREW, 1 INCH MALE X 1 INCH FEMALE, KUNKLE MODEL 20, OR MODEL NO. 0020-E01-MG0030, OR EQUAL., 2, EA; LI 036, NIPPLE, PIPE, 3/4 IPS X 4-1/2 INCH, GALVANIZED STEEL, SCHEDULE 40, WELDED, ASTM A-120. COUNTRY OF ORIGIN:_________________., 25, EA; LI 037, NIPPLE, PIPE, 1 INCH IPS X 3 INCH, GALVANIZED, SCHEDULE 40, WELDED, ASTM A-120, COUNTRY OF ORIGIN:______________________., 25, EA; LI 038, NIPPLE, PIPE, 2 INCH IPS X 6 INCH, GALVANIZED STEEL, SCHEDULE 40, WELDED, ASTM A-120. COUNTRY OF ORIGIN: __________________., 10, EA; LI 039, ELBOW, PIPE, 90 DEGREES, 1 INCH IPS, STRAIGHT, GALVANIZED, MALLEABLE IRON, 150 LB CLASS, BANDED, ANSI B16.3., 30, EA; LI 040, GAUGE, PRESSURE, 0-60 PSI, 4-1/2 INCH DIAL, 1/4 INCH MALE IPT BACK CONNECTED, SINGLE, FLUSH MOUNTING, STAINLESS STEEL ROTARY MOVEMENT, BRONZE BOURDON TUBE, COMPLETE WITH PULSE DAMPENING DEVICE, ASHCROFT NO. 1279 WITH GAUGE SAVE NO. 1073D, OR EQUAL., 3, EA; LI 041, GAUGE, PRESSURE, 0-100 PSI, 3-1/2 INCH DIAL, 1/4 INCH LOWER CONNECTION, DIAL GRADUATIONS 1 PSI, 1 PERCENT ACCURACY, STAINLESS STEEL CASE, BRONZE BOURDON TUBE, ASHCROFT 35-1009AW-02L 0/100, OR EQUAL., 5, EA; LI 042, SOLENOID, OIL IMMERSED, 115 VAC, 60 CYCLE, DECCO MODEL 17-784 VALVE ASSEMBLY NO. 21353-7303-0201, OR TELEDYNE NO. 02111-0300-3105, OR EQUAL., 2, EA; LI 043, CONNECTOR, TUBE, 3/8 X 3/8 INCH, MALE, BRASS, 3/8 INCH TUBE TO 3/8 INCH PIPE THREAD, COMPRESSION, WEATHERHEAD NO. 68X6X6, OR EQUAL., 5, EA; LI 044, SEALANT, PIPE JOINT SEAM, FOR USE ON ALL METALS AND PLASTICS, FOR JOINING DISSIMILAR METALS AND MATERIALS, NO HYDROCARBONS, NO SILICONES, NON-TOXIC, DOES NOT HARDEN OR BECOME BRITTLE, RESISTANT TO ALL REFRIGERANTS, OILS, WATER, AND MOST CHEMICALS (BOTH LIQUID AND GASES), FOR USE IN APPLICATIONS WHERE TFE IS NOT USABLE, EFFECTIVE IN TEMPERATURES -200 DEGREES F TO 400 DEGREES F, RESIN BASED BRUSHABLE PAST WHICH REMAINS PERMANENTLY FLEXIBLE, 4 OZ BRUSH TOP PLASTIC JAR, HIGHSIDE CHEMICALS LEAK LOCK, OR EQUAL., 12, BT; LI 045, COATING, ZINC, COLD GALVANIZING COMPOUND (NOT A PAINT), FLAT GRAY, CONTAINING A MINIMUM OF 90 ZINC DUST, BRIGHT APPEARANCE, CHARACTERISTICS OF HOT DIP GALVANIZED, CORROSION INHIBITIVE, RESISTANT TO SALT SPRAY, CONFORMING TO HOT DIP REPAIR SPEC NO. DOD-P-21035A, ASTM A780-80 AND MIL P-46105 (WELD THROUGH PRIMER), FREE OF LEAD, CHROMATES, METHYLENE CHLORIDE AND FLOUROCARBONS, FURNISHED IN 20 OZ AEROSOL CAN, RUST-OLEUM NO. 09816, OR BRITE ZINC, OR EQUAL., 24, EA; LI 046, CAP, PIPE, 3/8 INCH, MALLEABLE IRON, GALVANIZED, 150 LB CLASS, ANSI B16.3., 2, EA; LI 047, NIPPLE, PIPE, 1-1/2 INCH IPS X 1-3/4 INCH, CLOSE, GALVANIZED STEEL, SCHEDULE 40, WELDED, ASTM A-120. COUNTRY OF ORIGIN:___________________., 8, EA; LI 048, BUSHING, PIPE, 2 X 1-1/2 INCH, GALVANIZED, MALLEABLE IRON, HEXAGONAL, 150 LB CLASS, ANSI B16.3., 15, EA; LI 049, COUPLING, PIPE, 3 INCH, GALVANIZED, THREADED, MALLEABLE IRON, 150 LB CLASS, BANDED, ANSI B16.3., 3, EA; LI 050, COUPLING, HOSE, BRASS, 3/8 INCH, QUICK DISCONNECT SOCKET WITH ONE WAY CHECK VALVE TO MALE PIPE THREAD END CONNECTION, HANSEN SERIES 3000 NO. 3300, OR COILFLOW 155A, OR EQUAL., 8, EA; LI 051, NIPPLE, PIPE, 1/4 X 2-1/2 INCH IPS, BRASS, LONG, 1200 PSI OPERATING PRESSURE, WEATHERHEAD NO. 3329X4, OR EQUAL., 25, EA; LI 052, NIPPLE, PIPE, 3/4 IPS X 1-3/8 INCH, CLOSE, GALVANIZED STEEL, SCHEDULE 40, WELDED, ASTM A-120. COUNTRY OF ORIGION:________________., 25, EA; LI 053, NIPPLE, PIPE, 1/4 IPS X 7/8 INCH, CLOSE, GALVANIZED STEEL, SCHEDULE 40, WELDED, ASTM A-120. COUNTRY OF ORIGION:____________, 25, EA; LI 054, NIPPLE, PIPE, 1/8 IPS X 5-1/2 INCH, GALVANIZED STEEL, SCHEDULE 40, WELDED, ASTM A-120. COUNTRY OF ORIGION:___________________, 6, EA; LI 055, NIPPLE, PIPE, 1/8 IPS X 1-1/2 INCH, GALVANIZED STEEL, SCHEDULE 40, WELDED, ASTM A-120. COUNTRY OF ORIGION:___________________., 34, EA; LI 056, NIPPLE, PIPE, 1/8 IPS X 3 INCH, GALVANIZED STEEL, SCHEDULE 40, WELDED, ASTM A-120. COUNTRY OF ORIGION:___________________., 14, EA; LI 057, NIPPLE, HOSE, STEEL, 1-1/2 INCH ID, BARBED HOSE STEM ON ONE END, WITH MALE PIPE THREAD ON OTHER, DIXON NO. ST20, OR EQUAL., 6, EA; LI 058, PIPE, STEEL, GALVANIZED, 2-1/2 INCH, THREADED AND COUPLED, SCHEDULE 40, 2.875 INCH OD,.203 INCH WALL, 2.469 INCH ID, ASTM A53 OR A106, FURNISHED IN 21 FOOT LENGTHS., 2, LG; LI 059, BUSHING, PIPE, 1/2 X 1/4 INCH GALVANIZED, MALLEABLE IRON, HEX, 1/2 INCH MALE TO 1/4 INCH FEMALE, 150 LB CLASS(STANDARD), ANSI B16.3., 12, EA; LI 060, NIPPLE, PIPE, 1/2 INCH IPS X 1-1/8 INCH, CLOSE, GALVANIZED STEEL, SCHEDULE 40, WELDED, ASTM A-120. COUNTRY OF ORIGION:_______________., 100, EA; LI 061, NIPPLE, PIPE, 1-1/4 INCH IPS X 6 INCH, GALVANIZED STEEL, SCHEDULE 40, WELDED, ASTM A-120, COUNTRY OF ORIGION:___________________., 7, EA; LI 062, NIPPLE, PIPE, 1 INCH IPS X 6 INCH, GALVANIZED STEEL, SCHEDULE 40, WELDED, ASTM A-120, COUNTRY OF ORIGION:___________________., 14, EA; LI 063, NIPPLE, PIPE, 1 INCH IPS X 4 INCH, GALVANIZED STEEL, SCHEDULE 40, WELDED, ASTM A-120, COUNTRY OF ORIGION:___________________., 25, EA; LI 064, NIPPLE, PIPE, 3/4 INCH IPS X 3 INCH, GALVANIZED STEEL, SCHEDULE 40, WELDED, ASTM A-120, COUNTRY OF ORIGION:___________________., 25, EA; LI 065, NIPPLE, PIPE, 1/2 INCH IPS, BRASS, CLOSE, 1200 PSI OPERATING PRESSURE, WEATHERHEAD NO. 3326X8, OR EQUAL., 48, EA; LI 066, BUSHING, PIPE, 1-1/2 INCH X 3/4 INCH, GALVANIZED, MALLEABLE IRON, 1-1/2 INCH MALE TO 3/4 INCH FEMALE, HEXAGONAL, 150 LB CLASS, ANSI B16.3., 12, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, Bureau of Reclamation intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. Bureau of Reclamation is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 30 calendar days after close of Buy. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. Offeror must be registered in the Central Contractor Registration (CCR) database before an award can be made to them. If the offeror is not registered in the CCR, it may do so through the CCR website at http://www.ccr.gov.
Web Link: FBO.gov Permalink
(https://www.fbo.gov/notices/38d49bc3abe67be77b54bc15f13c6734)
Place of Performance: Address: GRAND COULEE, WA 99133; Zip Code: 99133
Record: SN02962711-W 20130112/130110234020-38d49bc3abe67be77b54bc15f13c6734 (fbodaily.com)
Source: FedBizOpps Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's FBO Daily Index Page |

Loren Data's SAM Daily™

45 -- PLUMBING SUPPLIES