MODIFICATION
51 -- Hand tools
- Notice Date
- 12/20/2012
- Notice Type
- Modification/Amendment
- Contracting Office
- 3985 Cummings Road, San Diego, CA 92136
- ZIP Code
- 92136
- Solicitation Number
- N65888227800T7
- Response Due
- 1/7/2013
- Archive Date
- 7/6/2013
- Point of Contact
- Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
- E-Mail Address
-
Clientservices@fedbid.com;
- Small Business Set-Aside
- Total Small Business
- Description
- CANCELLATION NOTICE:This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is N65888227800T7 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-63. The associated North American Industrial Classification System (NAICS) code for this procurement is 332216 with a small business size standard of 500.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2013-01-07 14:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be San Diego, CA 92135 The FLC - San Diego requires the following items, Meet or Exceed, to the following: LI 001, CLAMP PONY SPRING 2", 10, EA; LI 002, GUN GREASE LEVER ACTION, 5, EA; LI 003, FLAP WHEEL, 100, EA; LI 004, THREADED DRILL BIT COBALT STUBBY, 2500, EA; LI 005, TRAY RIVET PLASTIC 8 COMPARTMENT, 50, EA; LI 006, ROUTER TAPER 3 FLT PIN #1, 200, EA; LI 007, ROUTER TAPER 3 FLT PIN #2, 100, EA; LI 008, KEY DRILL CHUCK #30, 25, EA; LI 009, FILE ROTARY BALL 250-B #3, 100, EA; LI 010, PENLITE 3 WATT BLUE/SILVER, 6, EA; LI 011, SURFACE BLEND DISC MED/RED 3" TYPE S, 4000, EA; LI 012, SURFACE BLEND DISC MED/BLUE 3" TYPE S, 4000, EA; LI 013, ABRASIVE SCOTCHBRITE MAT 9X11, 1000, EA; LI 014, SURFACE BLEND DISC A CRS/3" TYPE S, 4000, EA; LI 015, ABRASIVE 2" CRS ROLS SCD SB TYPE S, 7000, EA; LI 016, ABRASIVE 2" CRS ROLC SCD SB TYPE S, 3000, EA; LI 017, ABRASIVE SANDING DISC SOCATT 1-1/2" 40 GRIT, 4000, EA; LI 018, ABRASIVE SANDING DISC SOCATT 1-1/2" 60 GRIT, 5000, EA; LI 019, ABRASIVE SANDING DISC SOCATT 1-1/2" 80 GRIT, 2000, EA; LI 020, ABRASIVE SANDING DISC SOCATT 1-1/2" 100 GRIT, 5000, EA; LI 021, ABRASIVE SANDING DISC SOCATT 3" 60GRIT, 4000, EA; LI 022, ABRASIVE SANDING DISC SOCATT 3" 80GRIT, 5000, EA; LI 023, ABRASIVE SANDING DISC SOCATT 3" 100GRIT, 2000, EA; LI 024, FILE ROTARY CARBIDE CYL 1/8X1/4X2, 100, EA; LI 025, #10 STUBBY THREADED COBALT DRILL BIT, 1500, EA; LI 026, #30 STUBBY THREADED COBALT DRILL BIT, 2000, EA; LI 027, #40 THREADED COBALT DRILL BIT STUBBY, 2000, EA; LI 028, #10 THREADED COBALT DRILL BIT SHORT, 4000, EA; LI 029, #30 THREADED COBALT DRILL BIT SHORT, 2000, EA; LI 030, #40 THREADED COBALT DRILL BIT SHORT, 3000, EA; LI 031, #30 THREADED COBALT DRILL BIT LONG, 4000, EA; LI 032, #40 THREADED COBALT DRILL BIT LONG, 3000, EA; LI 033, #30 DRILL BIT COBALT, 5000, EA; LI 034, #40 DRILL BIT COBALT, 5000, EA; LI 035, #21 DRILL BIT COBALT, 3000, EA; LI 036, ABRASIVE 2" FINE ROLOC SCD SCOTCHBRITE BLUE TYPE S, 3000, EA; LI 037, ABRASIVE 2" FINE ROLOC SCD SCOTCHBRITE GRAY TYPE S, 2000, EA; LI 038, HAMMER FACE INSERT 1 1/2", 24, EA; LI 039, FLEX HONE 9MM SILICONE CARBIDE 180GR, 200, EA; LI 040, OPTI-VISOR BINOCULAR MAGNIFIER, 12, EA; LI 041, CLAMP PONY SPRING 1" OPENING, 24, EA; LI 042, CLAMP TOGGLE KNU-VISE 1", 50, EA; LI 043, BRUSH WIRE WHEEL STL 6X1/2 AH, 36, EA; LI 044, #13 DRILL EXTENSION COBALT 6", 500, EA; LI 045, 1/4" DRILL EXTENSION COBALT 6", 300, EA; LI 046, EXTRACTOR SCREW SPIRAL #2, 200, EA; LI 047, CNTRSNK MICROSTOP CUTTER 7/16X3/32 100 DEG, 50, EA; LI 048, SCREWDRIVER FLAT ROUND SHANK 4", 6, EA; LI 049, BIT SCREWDRIVER JEWELER.055, 30, EA; LI 050, BIT SCREWDRIVER JEWELER.070, 50, EA; LI 051, BIT SCREWDRIVER JEWELER.100, 30, EA; LI 052, BRUSH CRIMPERD WIRE END STEEL 3/4"X.006SS, 50, EA; LI 053, WRENCH HEX DRIVER 5/64, 12, EA; LI 054, HOOKIT BACK UP PADS 5" D/F, 36, EA; LI 055, BRUSH WIRE WHEEL STL 7X5/8 AH, 36, EA; LI 056, CNTRSNK MICROSTOP CUTTER 100DEG 3/32X3/8, 100, EA; LI 057, BLADES RAZOR SINGLE EDGE, 1000, EA; LI 058, SCRIBE MACHINIST 8 1/2, 150, EA; LI 059, MAGNIFIER W/LEATHER CS PACKET 2X, 10, EA; LI 060, COLLET DOTCO 1/8", 25, EA; LI 061, NOZZLE SEALANT GUN 6", 500, EA; LI 062, DRILL CHUCK ATTACHMENT 180 DEG 1/4-28TH, 6, EA; LI 063, SURFACE BLENDING DISC VFN/BLUE 3" TYPE S, 5000, EA; LI 064, ABRASIVE SANDING DISC SOCATT 11/2" 100 GRIT TYPE S, 5000, EA; LI 065, ABRASIVE SANDING DISC SOCATT 3" 40 GRITT TYPE S, 5000, EA; LI 066, ABRASIVE SANDING DISC SOCATT 3" 80 GRITT TYPE S, 5000, EA; LI 067, #40 LONG THREADED SHANK COBALT DRILL BITS, 2000, EA; LI 068, #10 STUBBY THREADED SHANK COBALT DRILL BITS, 1000, EA; LI 069, FILE ROTARY CARBIDE CYLINDER 1/8X1/4X2", 100, EA; LI 070, ABRASIVE 2"X30" VFINE CLEAN & FINISH ROLLS SCOTCHBRITE, 100, EA; LI 071, BUCKING BAR AT630, 6, EA; LI 072, SQUEEZER 2" "C" YOKE HAND W/SET, 10, EA; LI 073, ADAPTER KEELER WRENCH 1/4 MALE SQUARE X 3/8 MALE HEX, 24, EA; LI 074, BRUSH WIRE BORE.50 CAL, 36, EA; LI 075, DRILL STEP 11/32, 6, EA; LI 076, HEAT GUN VARITEMP PH1200 ELECTRICAL ONLY, 16, EA; LI 077, HEAT GUN DUAL TEMPERATURE, 16, EA; LI 078, #40 DRILL BIT COBALT JOBBER, 6000, EA; LI 079, #30 DRILL BIT COBALT JOBBER, 6000, EA; LI 080, FLEXHONE AO 6.4MM 180 GRIT, 200, EA; LI 081, FLEX HONE AO5.5MM 180 GRIT, 200, EA; LI 082, FLEXHONE AO 5MM 180 GRIT, 200, EA; LI 083, ADAPTER NOSE JO-BOLT CNTRSNK 3/16, 24, EA; LI 084, FORCEPTS HEMOSTAT STR JAWS 7", 50, EA; LI 085, ABRASIVE SCOTCHBRITE MAT 9X11 FINE, 1000, EA; LI 086, ABRASIVE CLEANSING PADS AO MAROON 6X9, 1000, EA; LI 087, VARIABLE SPEED DRILL MOTOR PNEUMATIC 400-1200RPM, 6, EA; LI 088, SURFACE BLENDING DISC CRS/BROWN 3" DIA TYPE S, 4000, EA; LI 089, ABRASIVE CARTRIDGE ROLLS 100GR 5/8X1 1/2X3/16, 300, EA; LI 090, MICRO MINI GRIND O-FLEX ABRASIVE FLAP WHEELS 3/8X3/8X1/8 SHANK 60 GRIT, 1000, EA; LI 091, MICRO MINI GRIND O-FLEX 3/8X3/8X1/8 SHANK 80 GRIT, 300, EA; LI 092, BIT FLAT TIP 2 1/8, 3/8 TIP, 3/8 DR, 24, EA; LI 093, FILE ROTARY TREE ROUND NOSE 3/8DX1/4 SHANK SF-3, 50, EA; LI 094, FILE ROTARY TREE ROUND NOSE 1/4DX1/4 SHANK SF-1, 50, EA; LI 095, #27 THREADED DRILL BIT COBALT LONG, 500, EA; LI 096, 25' CORDED ANGLE LIGHT STUBBY II, 60, EA; LI 097, 5/6 WEDELSTAEDT CHISEL, 12, EA; LI 098, CORD EXTENSION 16 GAUGE 100FT SINGLE OUTLET, 25, EA; LI 099, RIVNUT MANDREL STUD 10-32, 6, EA; LI 100, WIRE STRIPPER THERMAL TW-1, 12, EA; LI 101, SAWZALL BLADE 6"X18T, 100, EA; LI 102, PLIER RETAINING RING EXT 2, 10, EA; LI 103, HEX NUT CLECO NUT RUNNER, 8, EA; LI 104, SANDING DISC 5" PSA 100 GRIT AO, 2000, EA; LI 105, SANDING DISC 5" PSA 120 GRIT AO, 100, EA; LI 106, WRENCH HEX DRIVER SHAFT 5/64, 100, EA; LI 107, BRUSH SSTL 1/3/32X.005, 500, EA; LI 108, COUNTERSINK MICROSTOP CUTTER 1/2X1/8 PILOT, 36, EA; LI 109, COUNTERSINK MICROSTOP CUTTER 100 DEG 3/8X5/32 PILOT, 50, EA; LI 110, DIAL INDICATOR SET 0-100,.001 GRAD, 5, EA; LI 111, FLEX-HONE SC7, 150, EA; LI 112, FLEX-HONE SC8, 150, EA; LI 113, BIT SCREWDRIVER PHILLIP #2 5/16 DR, 150, EA; LI 114, CHISEL DENTAL NO. 3/4, 6, EA; LI 115, BIT SCDRIVER JEWELER.040, 24, EA; LI 116, FILE ROTARY CYL FLAT END CARBIDE SA-1 1/4X1/4X2 3/4 SINGLE CUT, 30, EA; LI 117, FILE ROTARY CYL FLAT END CARBIDE SA-4 7/16X1/4X2 3/4 SINGLE CUT, 24, EA; LI 118, FILE HANDLE MEDIUM, 24, EA; LI 119, CLAMP PONY SPRING 2", 12, EA; LI 120, MAGNIFIER READING GLASS 4-5", 10, EA; LI 121, ADAPTER KELLER WRENCH 1/4 MAKE SQUARE 3/8 MAKE HEX, 24, EA; LI 122, TPG321KC850 CARBIDE INSERT, 30, EA; LI 123, GSP125NKC935 CARBIDE INSERT, 30, EA; LI 124, GTN2 CARBIDE INSERT INCAR COATED, 30, EA; LI 125, GTN3 CARBIDE INSERT INCAR COATED, 50, EA; LI 126, GTN5 CARBIDE INSERT INCAR COATED, 50, EA; LI 127, GTN6 CARBIDE INSERT INCAR COATED, 30, EA; LI 128, TNMP332KC850 CARBIDE INSERT, 30, EA; LI 129, TNMS332KC850 CARBIDE INSERT, 30, EA; LI 130, TRAY RIVET PLASTIC, 50, EA; LI 131, FLEXHONE AO 8MM 180 GRIT, 150, EA; LI 132, WIRE STRIPPER 45-120, 5, EA; LI 133, FLEXHONE BC9 180 GRIT, 150, EA; LI 134, FLEXHONE AO 9MM 180 GRIT, 100, EA; LI 135, LAMP REPLACEMENT FOR MAGLITE 3 CELL, 200, EA; LI 136, PLIER AIRLOCK PIN SIZ 5, 12, EA; LI 137, FLASHLIGHT RECHARGEABLE, 50, EA; LI 138, FILE ROTARY BALL SD-14, 100, EA; LI 139, SCANNER HOLE PROBE 0.90 DIA, 10, EA; LI 140, SCANNER HOLE PROBE 0.125 DIA, 10, EA; LI 141, SCANNER HOLE PROBE 0.156 DIA, 10, EA; LI 142, SCANNER HOLE PROBE 0.187 DIA, 10, EA; LI 143, SCANNER HOLE PROBE 0.250 DIA, 10, EA; LI 144, SCANNER HOLE PROBE 0.312 DIA, 10, EA; LI 145, SCANNER HOLE PROBE 0.375 DIA, 5, EA; LI 146, SCANNER HOLE PROBE 0.437 DIA, 5, EA; LI 147, SCANNER HOLE PROBE 0.500 DIA, 5, EA; LI 148, SCANNER HOLE PROBE 0.562 DIA, 4, EA; LI 149, SCANNER HOLE PROBE 0.625 DIA, 4, EA; LI 150, SCANNER HOLE PROBE 0.750 DIA, 4, EA; LI 151, #20 THREADED DRILL BIT COBALT, 1000, EA; LI 152, FLEX HONE SC 6.4MM 180 GRIT, 200, EA; LI 153, ABRASIVE SANDING DISC SOCATT 3" 60 GRIT TYPE S, 4000, EA; LI 154, NPR51-KC850 CARBIDE INSERTS, 30, EA; LI 155, NPR52-KC850 CARBIDE INSERTS, 30, EA; LI 156, WRENCH TAP "I" HANDLE 93B 5/32-1/4, 24, EA; LI 157, FILE ROTARY CYL FLAT END CARBIDE 1/4X1/4 DBL CUT 250-AD, 25, EA; LI 158, FILE ROTARY CYL FLAT END CARBIDE 3/8X1/4 DBL CUT 375A, 25, EA; LI 159, FILE ROTARY TAPER BALL NOSE 625-H, 25, EA; LI 160, FILE ROTARY TAPER BALL NOSE 375-LA, 12, EA; LI 161, FILE ROTARY BALL 1/8X1/4X1/8 SD-11, 150, EA; LI 162, FILE ROTARY BALL 3/8X1/4X5/8 SD-6, 50, EA; LI 163, FILE ROTARY BALL5/8X1/4X5/8 SD-6, 50, EA; LI 164, FILE ROTARY CARB 3/8X1/4X3/4 CYL SA-3, 2, EA; LI 165, BURRAWAY TYPE A 3/16, 12, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, FLC - San Diego intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. FLC - San Diego is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. This announcement constitutes the only solicitation; a formal, written solicitation will not be issued. PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This solicitation documents and incorporates provisions and clauses in effect through FAC 2005-60 and DFARS Change Notice 20120724. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at these addresses: www.acqnet.gov/far and http://www.acq.osd.mil/dpap/dfars/index.htm FAR 52.247-34, F.o.b. Destination applies 52.212-2 Evaluation - Commercial Items. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. No partial shipments are permitted unless specifically authorized at the time of award. Bid MUST be good for 30 calendar days after close of Buy. FAR 52.212-3 Offeror Reps and Certs / FAR 52.212-3 Alt1 Offeror Reps and Certs. EFFECTIVE JAN 2005, all offerors are required to use ?Online Representations and Certifications Application (ORCA) to respond to federal solicitations. To register in ORCA, please go to www.bpn.gov/orca. You must be active in the Central Contractor Registration (www.ccr.gov) and have a Marketing Partner Identification Number (MPIN), to register in ORCA. Failure to register in ORCA may preclude an award being made to your company. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/Far/ 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders?Commercial Items. 52.204-10 Reporting Subcontract Awards. 52.219-28 Post-Award Small Business Program Rerepresentation. 52.222-3 Convict Labor 52.222-19 Child Labor--Cooperation with Authorities and Remedies 52.222-21 Prohibition of Segregated Facilities 52.222-26 Equal Opportunity 52.222-35 Equal Opportunity for Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans 52.222-36 Affirmative Action for Workers w/ Disabilities 52.222-37 Employment Reports on Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans. 52.223-18 Contractor Policy to Ban Text Messaging while Driving (SEPT 2010) 52.225-13 Restrictions on Certain Foreign Purchases. 52.232-18 Availability of Funds 252.211-7003 Item Identification & Valuation (AUG 2008) 252.212-7001 Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisitions of Commercial Items. (MAR 2011) 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports. 252.247-7023 Transportation of Supplies by Sea (MAY 2002) 252.247-7023 (iv) Alt III - ALTERNATE III (MAY 2002) 252.247-7023. 252.225-7000: Buy American Act-Balance of Payments Program Certificate 252.232-7010: Levies on Contract Payments 5252.NS-046P: Prospective Contractor Responsibility 52.212-4: Contract Terms and Conditions-Commercial Items 52.212-1: Instructions to Offerors-Commercial Items 52.252-1:Solicitation Provisions Incorporated by Reference 52.252-2: Clauses Incorporated by Reference 52.237-2: Protection of Government Buildings, Equipment, and Vegetation. Control of Government Personnel Work Product (April 1992) Representation Regarding Conviction of a Felony Criminal Violation Under and Federal or State Law (Mar 2012) Requirements Relating to Compensation of Former DOD Officials (Sep 2011) Buy American Act & Balance of Payments (Oct 2011) The NAICS code is 332216 and the Small Business Standard is 500 employess. Offeror Representation and Certifications-Commercial Items-ALT I-OCT 1998; Incorporated by reference; NOTE: This provision is considered a ?fill-in.? All applicable fields must be completed. Submit this provision with your quotation. See NECO for attachment. Contract Terms and Conditions Commercial Items Gratuities Restrictions on Subcontractor Sales to the Government Protecting the Government?s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment Notice of Total Small Business Set-aside Utilization of Small Business Concerns Notification of Employee Rights Under the National Labor Relations Act Combating Trafficking in Persons Payment by Electronic Funds Transfer--Central Contractor Registration Protest after Award Applicable Law for Breach of Contract Claim Protection of Existing Vegetation, Structures, Equipment, Utilities, and Improvements Clauses Incorporated by Reference Solicitation Provisions Incorporated By Reference Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisitions of Commercial Items Electronic Submission of Payment Requests Transportation of Supplies by Sea (May 2002) Alternate III Levies on Contract Payments Utilization of Indian Organization Pricing of Contract Modifications Invoicing and Payment (WAWF) Instructions
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DON/NAVSUP/200/N65888227800T7/listing.html)
- Place of Performance
- Address: San Diego, CA 92135
- Zip Code: 92135
- Zip Code: 92135
- Record
- SN02953053-W 20121222/121220234716-82a9e07e0f54574a7ada9692a3384261 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |