SOLICITATION NOTICE
13 -- FABRICATION OF FLIGHT CERTIFIED HARDWARE -1.375 INCH FRANGIBLE NUT
- Notice Date
- 12/20/2012
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 332710
— Machine Shops
- Contracting Office
- NASA/Lyndon B. Johnson Space Center, Houston Texas, 77058-3696, Mail Code: BH
- ZIP Code
- 00000
- Solicitation Number
- NNJ13458860Q
- Response Due
- 1/11/2013
- Archive Date
- 12/20/2013
- Point of Contact
- Dana Altmon-Cary, Contracting Officer, Phone 281-483-8228, Fax 281-483-4066, Email dana.altmon-cary-1@nasa.gov
- E-Mail Address
-
Dana Altmon-Cary
(dana.altmon-cary-1@nasa.gov)
- Small Business Set-Aside
- Total Small Business
- Description
- This notice is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; offers are being requested and a written solicitation will not be issued. This notice is being issued as a Request for Quotations (RFQ) for the Fabrication of the Flight Certified Hardware - 1.375 Inch Frangible Nut in accordance with the Statement Of Work and the Specifications and Drawings. Potential vendors shall comply with the NASA Approved Supplier List for Inconel 718 and MP35N Machined Parts. The Statement of Work can be viewed at: http://procurement.jsc.nasa.gov/NNJ13458860Q/Flight-1-375-nut-SOW.docx The Drawings and Specifications can be viewed at: http://procurement.jsc.nasa.gov/NNJ13458860Q/Drawing-Spec.pdf The NASA Approved Supplier List can be viewed at: http://procurement.jsc.nasa.gov/NNJ13458860Q/Approved-SupplierList.pdf The provisions and clauses in the RFQ are those in effect through FAC 2005-62. This procurement is a total small business set-aside. See Note 1. The NAICS Code and the small business size standard for this procurement are 332710 and 500 respectively. The offeror shall state in their offer their size status for this procurement. All responsible sources may submit an offer which shall be considered by the agency. Delivery to NASA/Johnson Space Center, Building 421, 2101 NASA Parkway Houston, TX 77058 is required within 12 weeks ARO. Delivery shall be FOB Destination. Offers for the items(s) described above are due by COB on 01/11/2013 to Dana Altmon-Cary at dana.altmon-cary-1@nasa.gov and must include, solicitation number, FOB destination to this Center, proposed delivery schedule, discount/payment terms, warranty duration (if applicable), taxpayer identification number (TIN), identification of any special commercial terms, and be signed by an authorized company representative. Offerors are encouraged to use the Standard Form 1449, Solicitation/Contract/Order for Commercial Items form found at URL: http://server-mpo.arc.nasa.gov/Services/NEFS/NEFSHome.tml Offerors shall provide the information required by FAR 52.212-1 (FEB 2012), Instructions to Offerors-Commercial Items, which is incorporated by reference. If the end product(s) offered is other than domestic end product(s) as defined in the clause entitled 'Buy American Act -- Supplies,' the offeror shall so state and shall list the country of origin. FAR 52.212-4 (FEB 2012), Contract Terms and Conditions-Commercial Items is applicable. FAR 52.212-5 (NOV 2012), Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items is applicable and the following identified clauses are incorporated by reference: 52.222-3,52.222-19,52.222-21,52.222-26,52.222-36,52.225-1,52.246-15. The FAR may be obtained via the Internet at URL: http://www.acquisition.gov/far/index.html NFS 1852.246-73 Human Space Flight is applicable. The NFS may be obtained via the Internet at URL: http://www.hq.nasa.gov/office/procurement/regs/nfstoc.htm All contractual and technical questions must be in writing via e-mail to dana.altmon-cary-1@nasa.gov not later than COB 01/07/2013. Telephone questions will not be accepted. Selection and award will be made to the lowest priced, technically acceptable offeror, with acceptable relevant past performance data, that includes work with Inconel 718 and MP35N machined parts. Technical acceptability will be determined by review of information submitted by the offeror which must provide a description in sufficient detail to show that the product offered meets the Government's requirement. The Government reserves the right to make multiple awards for this procurement. Offerors must include completed copies of the provision at 52.212-3 (DEC 2012), Offeror Representations and Certifications - Commercial Items with their offer. The provision may be obtained via the internet at URL: http://farsite.hill.af.mil/reghtml/regs/far2afmcfars/fardfars/far/52_000.htm. These representations and certifications will be incorporated by reference in any resultant contract. NASA Clause 1852.215-84 (NOV 2011), Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at http://prod.nais.nasa.gov/pub/pub_library/Omb.html. Prospective offerors shall notify this office of their intent to submit an offer. It is the offeror's responsibility to monitor the following Internet site for the release of solicitation amendments (if any): http://prod.nais.nasa.gov/cgi-bin/eps/bizops.cgi?gr=D&pin=73. Potential offerors will be responsible for downloading their own copy of this combination synopsis/solicitation and amendments (if any). Any referenced notes may be viewed at the following URLs linked below.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/NASA/JSC/OPDC20220/NNJ13458860Q/listing.html)
- Record
- SN02952987-W 20121222/121220234626-294d5ade06ade529f4bfaf5963248c6b (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |