SOLICITATION NOTICE
13 -- CHARGE ASSEMBLY,SHA
- Notice Date
- 12/10/2012
- Notice Type
- Presolicitation
- NAICS
- 325920
— Explosives Manufacturing
- Contracting Office
- DEPARTMENT OF THE AIR FORCE; AFLCMC EBHK;6033 ELM LN BLDG 1247;HILL AIR FORCE BASE; UT; 84056
- ZIP Code
- 84056
- Solicitation Number
- FA8213-13-Q-3023
- Response Due
- 1/4/2013
- Archive Date
- 4/4/2013
- Point of Contact
- Tony Roest, Phone 801-777-8851, Fax 801-777-5840, Emailtony.roest@hill.af.mil
- E-Mail Address
-
Tony Roest
(tony.roest@hill.af.mil)
- Small Business Set-Aside
- N/A
- Description
- PR Number(s): FD20201377023 Item: 0001 NSN: 1377012077092ES CHARGE ASSEMBLY,SHA P/N: 826844-1, P/N: 51082-1, P/N: L325C2013, Description: CHARGE ASSEMBLY,SHAPED|B-1B|RIGID LINEAR|5|INCLUDED|EXWT|CHARGE ASSY,LINEAR CIRCULAR, TYPE I|1377-SS76|UN0237|EX-9712190|0.0041 TRANSPORTATION POUNDS AND 0.00186 TRANSPORTATION KILOGRAMS AND 0.0041 STORAGE POUNDS AND 0.00186 STORAGE KILOGRAMS|LEFT HAND;ADHESIVE ACTIVATOR;OVAL BOOSTER CLIP;JETCORD;LENGTH 4.388 IN;WIDTH 3.626 IN|1.4|MRCS|CHARGES,SHAPED,FLEXIBLE LINEAR|1.4D Quantity: 16.0000 EA Destn: FV2037,TINKER AIR FORCE BASE,OK,73145-5000. Delivery: 30 JUN 2014 Specified Date, 16.00 PR Number(s): FD20201377023 Item: 0002 NSN: 1377012078733ES CHARGE ASSEMBLY,SHA P/N: 826844-2, P/N: 51082-2, P/N: L325C2013, Description: CHARGE ASSEMBLY,SHAPED|B-1B|RIGID LINEAR|5|INCLUDED|EXWT|CHARGE ASSY,LINEAR CIRCULAR, TYPE I|1377-SQ98|UN0237|EX-9712191|0.0041 TRANSPORTATION POUNDS AND 0.00186 TRANSPORTATION KILOGRAMS AND 0.0041 STORAGE POUNDS AND 0.00186 STORAGE KILOGRAMS|RIGHT HAND;ADHESIVE ACTIVATOR,OVAL BOOSTER CLIP;JET CORD;LENGTH 4.388 IN;WIDTH 3.626 IN|1.4|MRCS|CHARGES,SHAPED,FLEXIBLE LINEAR|1.4D Quantity: 16.0000 EA Destn: FV2037,TINKER AIR FORCE BASE,OK,73145-5000. Delivery: 30 JUN 2014 Specified Date, 16.00 PR Number(s): FD20201377023 Item: 0003 NSN: 1377012083164ES CHARGE ASSEMBLY,SHA P/N: 826845-1, P/N: 51083-1, P/N: L325C2013 T,II, Description: CHARGE ASSEMBLY,SHAPED|B-1B|EXWT|1377-WA02|UN0237|EX-9712192|0.0089 TRANSPORTATION POUNDS AND 0.004037 TRANSPORTATION KILOGRAMS AND 0.0089 STORAGE POUNDS AND 0.004037 STORAGE KILOGRAMS|1.4|MRCS|CHARGES,SHAPED,FLEXIBLE LINEAR|1.4D Quantity: 32.0000 EA Destn: FV2037,TINKER AIR FORCE BASE,OK,73145-5000. Delivery: 30 JUN 2014 Specified Date, 32.00 PR Number(s): FD20201377023 Item: 0004 DATA Description: Supp. Description: NOTE: Approved Ammunition Data Cards (A001), with respective CDRL, shall be attached electronically in WAWF using DODACC FA8213 when invoicing for this CLIN. Failure to do so will result in delay of Government acceptance and/or rejection of invoicing. Quantity: 1.0000 LO Destn: IAW1423,,, -. Delivery: *ARO IAW DD1423, 1.00 MM PR Number(s): FD20201377023 Item: 0005 DATA Description: Supp. Description: Note: Each respective CDRL shall be attached electronically in WAWF using DODAAC FA8213 when invoicing for this CLIN. Failure to do so will result in delay of Government acceptance and/or rejection of invoicing. Quantity: 1.0000 LO Destn: IAW1423,,, -. Delivery: *ARO IAW DD1423, 1.00 MM Plus 0000 additional items Written response is required Anticipated Award Date: 03MAY2013 Duration of Contract Period: 30 Jun 2014 Electronic procedure will be used for this solicitation. All responsible sources may submit a capability statement, proposal, or quotation, which shall be considered by the agency. The solicitation will be made available through electronic data interchange procedures Electronic Data Interchange (EDI). To obtain and respond to the solicitation electronically, the following information is applicable: www.FBO.gov Authority: 10 U.S.C. 2304(C)(1), Justification: Supplies (or Services) required are available from only one or a limited number of responsible source(s) and no other type of supplies or services will satisfy agency requirements. It is suggested that small business firms or others interested in subcontracting opportunities in connection with the described procurement make contact with the firm(s) listed. This part required engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique design capability, engineering skills, and manufacturing knowledge by the qualified source(s) require acquisition of the part from the approved source(s). The approved source(s) retain data rights, manufacturing knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/AFMC/OOALC/FA8213-13-Q-3023/listing.html)
- Record
- SN02945578-W 20121212/121210234056-4a622de4ae32cd55269c3687ba78fe78 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |