MODIFICATION
59 -- Micro Dosimeters
- Notice Date
- 10/25/2012
- Notice Type
- Modification/Amendment
- NAICS
- 334413
— Semiconductor and Related Device Manufacturing
- Contracting Office
- Department of the Air Force, Direct Reporting Units, USAF Academy - 10 CONS, 8110 Industrial Drive, Suite 200, USAF Academy, Colorado, 80840-2315, United States
- ZIP Code
- 80840-2315
- Solicitation Number
- FA7000-13-T-0007
- Archive Date
- 11/3/2012
- Point of Contact
- Andrew R. Lawson, Phone: 3332327, Diana Myles-South, Phone: 719-333-8650
- E-Mail Address
-
Andrew.Lawson.2@us.af.mil, Diana.South@us.af.mil
(Andrew.Lawson.2@us.af.mil, Diana.South@us.af.mil)
- Small Business Set-Aside
- N/A
- Description
- Combined Synopsis/Solicitation IAW FAR 12.603 This is a combined synopsis/solicitation for a commercial item prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written (formal) solicitation will not be issued. This solicitation is issued as solicitation number FA7000-13-T-0007, in accordance with FAR Part 12 and 13. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-61, effective October 15, 2012. The North American Industry Classification System (NAICS) code is 334413 and the small business size standard is 500 employees. All responsible sources may submit a quote, which if received timely, will be considered by the 10 th Contracting Squadron, USAF Academy (USAFA). REQUIREMENTS FOR QUOTE: Please read and comply with all requirements for submitting a quote. Failure to comply with all instructions contained within this combined synopsis/solicitation could result in the quote being ineligible for award. It is the offeror’s responsibility to ensure their quote meets all the requirements identified herein. The USAF Academy has a Brand Name or Equal requirement to procure 11 (ea) Teledyne Technologies, Inc. Commercial Grade Micro Dosimeters meeting or exceeding the salient characteristics below. Please provide pricing for each of the following line items: Item No. Description Qty. Unit Price Extended Price 0001 Teledyne Technologies, Inc. Commercial Grade Micro Dosimeters ( UDOS001-C, Part #2307065-1) or EQUAL. Salient characteristics are as follows: · Take an area of not more than 10 square centimeters on the printed circuit board · Operate directly from an unregulated 28V spacecraft power bus, with the ability to operate at voltages as low as 13V, and as high as 40V · At least 4 analog output stages in the 0-5V full scale. Each output shall correspond to a digital counter proportional to the total ionizing dose. Three of the outputs shall be linear counters, with the fourth pseudo-log proportional to the full scale reading · Dose resolution of 20 µrads – total dose of 300 kRads · Dose rate 1-10,000 µRads/s · Must not require an external high voltage power supply · Test input signal used to trigger laboratory calibration · Equivalent linear energy transfer range of the micro dosimeter is to be between 0.4-60keV/micron · Total mass less than or equal to 25 grams · Total power required less than or equal to 0.4 W · Operating temperature -30 to +40 degrees centigrade 11 $ $ 0002 IUID Labels in accordance with DFARS clause 252.211-7003 11 $ $ TOTAL PRICE $ The following Federal Acquisition Regulation (FAR) clauses apply to this combined synopsis/solicitation and offerors must comply with all instructions contained in FAR 52.212-1, Instructions to Offerors--Commercial Items, addenda applies: The contractor shall submit their quote on company letterhead to include the following: solicitation number, contact name, address, telephone number of the offeror, unit price, extended price, any discount terms, delivery terms, cage code, DUNS number, tax identification number, size of business, warranty information, and acknowledgement of solicitation amendments if required. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer. Quotes must be received no later than 1:00 pm Mountain Time, November 2, 2012 at the 10 CONS/LGCB, 5226 Cedar Drive, USAF Academy, CO 80840-2315. Please submit quotes by e-mail to Andrew Lawson, Contract Specialist, (719) 333-2327 at andrew.lawson.2@us.af.mil. In his absence, please contact Diana Myles-South, Contracting Officer, ( 719) 333-8650 or email to diana.south@us.af.mil. FAR 52.252-2 Clauses Incorporated by Reference (FEB 1998) This solicitation incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. The full text of a clause may be accessed electronically at this address: http://farsite.hill.af.mil / CLAUSES INCORPORATED BY REFERENCE 52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards (Aug 2012) 52.209-6 Protecting the Government’s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment (Dec 2010) 52.209-10 Prohibition on Contracting With Inverted Domestic Corporations (May 2012) 52.212-4 Contract Terms and Conditions -- Commercial Items (Feb 2012) 52.219-28 Post-Award Small Business Program Representation (Apr 2012) 52.222-3 Convict Labor (June 2003) 52.222-19 Child Labor—Cooperation With Authorities and Remedies (Mar 2012) 52.222-21 Prohibition of Segregated Facilities (Feb 1999) 52.222-26 Equal Opportunity (Mar 2007) 52.222-36 Affirmative Action for Workers With Disabilities (Oct 2010) 52.222-50 Combating Trafficking in Persons (Feb 2009) 52.223-18 Encouraging Contractor Policies to Ban Text Messaging While Driving (Aug 2011) 52.225-13 Restriction on Certain Foreign Purchases (Jun 2008) 52.232-33 Payment by Electronic Funds Transfer--Central Contractor Registration (Oct 2003) 52.233-3 Protest after Award (Aug 1996) 52.233-4 Applicable Law For Breach Of Contract Claim (Oct 2004) 252.203-7000 Requirements Relating to Compensation of Former DoD Officials (Sep 2011) 252.225-7001 Buy American and Balance of Payments Program 252.225-7002 Qualifying Country Sources as Subcontractors (Jun 2012) 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports (Jun 2012) 252.232-7010 Levies on Contract Payments (Dec 2006) CLAUSES INCORPORATED BY FULL TEXT The provision at FAR 52.211-6, Brand Name or Equal applies to this acquisition. 52.211-6 Brand Name or Equal (Aug 1999) (a) If an item in this solicitation is identified as “brand name or equal,” the purchase description reflects the characteristics and level of quality that will satisfy the Government’s needs. The salient physical, functional, or performance characteristics that “equal” products must meet are specified in the solicitation. (b) To be considered for award, offers of “equal” products, including “equal” products of the brand name manufacturer, must— (1) Meet the salient physical, functional, or performance characteristic specified in this solicitation; (2) Clearly identify the item by— (i) Brand name, if any; and (ii) Make or model number; (3) Include descriptive literature such as illustrations, drawings, or a clear reference to previously furnished descriptive data or information available to the Contracting Officer; and (4) Clearly describe any modification the offeror plans to make in a product to make it conform to the solicitation requirements. Mark any descriptive material to clearly show the modification. (c) The Contracting Officer will evaluate “equal” products on the basis of information furnished by the offeror or identified in the offer and reasonably available to the Contracting Officer. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer. (d) Unless the offeror clearly indicates in its offer that the product being offered is an “equal” product, the offeror shall provide the brand name product referenced in the solicitation. (End of provision) Addenda to FAR 52.212-1, Proposal Preparation Instructions: 1. Initially, quotes will be evaluated on a pass or fail basis (Brand Name or equal, Provision at FAR 52.211-6) to determine whether the proposed Micro Dosimeters meet the salient physical, functional, or performance characteristics of the specifications provided at the lowest evaluated price. 2. Quotes will then be ranked according to price. The offeror who submits the lowest price and meets or exceeds the salient physical, functional or performance characteristics will receive the award. The award will be made to that offeror without further consideration of any other offerors. 3. The Offeror of an “or equal item” must submit data that adequately demonstrates that its product meets the salient characteristics of the solicitation. A general statement of compliance or restatement of the salient characteristics is insufficient. Offerors who are providing an “or equal” shall include in their offer descriptive literature such as illustrations, drawings, or a clear reference to information readily available to the Contracting Officer. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer. If an offeror cannot comply with every requirement, that offer will not be considered. 4. Offerors shall provide their warranty information for the micro dosimeters in detail stating the terms of the warranty and warranty time period. 5. Prices quoted must be Firm-Fixed Price to include shipping and handling charges based on FOB Destination or, if shipping other than FOB Destination please provide estimated shipping charges. 6. Delivery is required no later than 3 months after receipt of order. ADDRESS: Transportation Officer-FE7000 8110 Security Drive, Ste 11 USAF Academy, CO 80840 7. The provision at FAR 52.212-3, Offeror Representations and Certifications – Commercial Items (April 2012) and its Alternate I must be completed. Offerors are HIGHLY ENCOURAGED to complete all representations and certifications electronically on line at: ( www.sam.gov ). If not completed on-line, 52.212-3 and its Alt I shall be completed in hard copy and submitted with quote. 8. The provision at DFARS 252.225-7000, Buy American Statute – Balance of Payments Program Certificate (June 2012) – Attachment 1, must be completed, signed and returned with quote. The certificate can also be obtained at http://farsite.hill.af.mil/. 9. In accordance with FAR 52.212-4(t), Central Contractor Registration (CCR) contractors must be registered with CCR to conduct business with the Department of Defense. No purchase order can be awarded to any company without this registration. ( www.sam.gov ) (End of Addendum) The provision at FAR 52.212-2, Evaluation--Commercial Items 52.212-2 Evaluation--Commercial Items (Jan 1999) a. The government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factor shall be used to evaluate offers: Award will be made on the basis of determining offerors who meet or exceed the salient characteristics listed below on a pass/fail basis and those offerors who pass (meeting salient characteristics) will then be evaluated on who offered the lowest evaluated price which meets or exceeds the requirements. If an offeror does not meet the salient characteristics, it will not be considered. The offeror of an “or equal” item must submit data that adequately demonstrates that its product meets or exceeds the salient characteristics in accordance with the provision at FAR 52.211-6, Brand Name or equal. Salient Characteristics: · Take an area of not more than 10 square centimeters on the printed circuit board · Operate directly from an unregulated 28V spacecraft power bus, with the ability to operate at voltages as low as 13V, and as high as 40V · At least 4 analog output stages in the 0-5V full scale. Each output shall correspond to a digital counter proportional to the total ionizing dose. Three of the outputs shall be linear counters, with the fourth pseudo-log proportional to the full scale reading · Dose resolution of 20 µrads, with a total does of 300 kRads · Dose rate 1-10,000 µRads/s · Must not require an external high voltage power supply · Test input signal used to trigger laboratory calibration · Equivalent linear energy transfer range of the micro dosimeter is to be between 0.4-60keV/micron · Total mass less than or equal to 25 grams · Total power required less than or equal to 0.4 W · Operating temperature -30 to +40 degrees centigrade (End of Provision) FAR 52.212-4, Contract Terms and Conditions—Commercial Items (Feb 2012) applies to this acquisition and the following addenda, applies: ADDENDUM TO FAR 52.212-4(c) CHANGES Text in paragraph (c) is deleted and replaced with the following: Changes in terms and conditions of this contract may be made only by written agreement of the parties with the exception of certain changes such as administrative changes including changes in paying office, appropriation data, etc. authorized by the Federal Acquisition Regulation and its supplements that may be made unilaterally by the Contracting Officer (for a complete list of changes that may be made unilaterally, see FAR 43.103(b)). (End of Addendum) FAR 52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS--COMMERCIAL ITEMS (Mar 2012) (DEVIATION) (a) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (a) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records -- Negotiation. (1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor’s directly pertinent records involving transactions related to this contract. (2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved. (3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law. (b) (1) Notwithstanding the requirements of any other clause in this contract, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (b)(1) in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause— (i) 52.203-13, Contractor Code of Business Ethics and Conduct (Apr 2010) (Pub. L. 110-252, Title VI, Chapter 1 (41 U.S.C. 251 note)). (iii) 52.219-8, Utilization of Small Business Concerns (Dec 2010) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $650,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities (ix) [Reserved] (iv) 52.222-26, Equal Opportunity (Mar 2007) (E.O. 11246). (v) 52.222-35, Equal Opportunity for Veterans (Sep 2010) (38 U.S.C. 4212). (vi) 52.222-36, Affirmative Action for Workers with Disabilities (Oct 2010) (29 U.S.C. 793). (vii) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40. (viii) 52.222-41, Service Contract Act of 1965, (Nov 2007), (41 U.S.C. 351, et seq.) (ix) 52.222-50, Combating Trafficking in Persons (Feb 2009) (22 U.S.C. 7104(g)). Alternate I (Aug 2007) of 52.222-50 (22 U.S.C. 7104(g)). (x) 52.222-51, Exemption from Application of the Service Contract Act to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (Nov 2007) (41 U.S.C. 351, et seq.). (xi) 52.222-53, Exemption from Application of the Service Contract Act to Contracts for Certain Services--Requirements (Feb 2009) (41 U.S.C. 351, et seq.) (xii) 52.222-54, Employment Eligibility Verification (Jan 2009). (xiii) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (Mar 2009) (Pub. L. 110-247). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6. (xiv) 52.247-64, Preference for Privately-Owned U.S. - Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64. (2) While not required, the contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations. (End of Clause) 252.211-7003 Item Identification and Valuation. As prescribed in 211.274-6 (a), use the following clause: ITEM IDENTIFICATION AND VALUATION (JUN 2011) (a) Definitions. As used in this clause— “Automatic identification device” means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media. “Concatenated unique item identifier” means— (1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or (2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number. “Data qualifier” means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows. “DoD recognized unique identification equivalent” means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/iuid_equivalents.html. “DoD unique item identification” means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number. “Enterprise” means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items. “Enterprise identifier” means a code that is uniquely assigned to an enterprise by an issuing agency. “Government’s unit acquisition cost” means— (1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery; (2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor’s estimated fully burdened unit cost to the Government at the time of delivery; and (3) For items produced under a time-and-materials contract, the Contractor’s estimated fully burdened unit cost to the Government at the time of delivery. “Issuing agency” means an organization responsible for assigning a globally unique identifier to an enterprise (i.e., Dun & Bradstreet’s Data Universal Numbering System (DUNS) Number, GS1 Company Prefix, Allied Committee 135 NATO Commercial and Government Entity (NCAGE)/ Commercial and Government Entity (CAGE) Code, or the Coded Representation of the North American Telecommunications Industry Manufacturers, Suppliers, and Related Service Companies (ATIS-0322000) Number), European Health Industry Business Communication Council (EHIBCC) and Health Industry Business Communication Council (HIBCC)), as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.nen.nl/web/Normen-ontwikkelen/ISOIEC-15459-Issuing-Agency-Codes.htm. “Issuing agency code” means a code that designates the registration (or controlling) authority for the enterprise identifier. “Item” means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts. “Lot or batch number” means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions. “Machine-readable” means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards. “Original part number” means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface. “Parent item” means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent. “Serial number within the enterprise identifier” means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise. “Serial number within the part, lot, or batch number” means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment. “Serialization within the enterprise identifier” means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier. “Serialization within the part, lot, or batch number” means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier. “Unique item identifier” means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent. “Unique item identifier type” means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html. (b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item. (c) Unique item identifier. (1) The Contractor shall provide a unique item identifier for the following: (i) All delivered items for which the Government’s unit acquisition cost is $5,000 or more. (ii) The following items for which the Government’s unit acquisition cost is less than $5,000: Contract Line, Subline, or Exhibit Line Item Number Item Description ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ (iii) Subassemblies, components, and parts embedded within delivered items as specified in Attachment Number ____. (2) The unique item identifier and the component data elements of the DoD unique item identification shall not change over the life of the item. (3) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that— (i) The encoded data elements (except issuing agency code) of the unique item identifier are marked on the item using one of the following three types of data qualifiers, as determined by the Contractor: (A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology – EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard. (B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology – EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard. (C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary; and (ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology – Transfer Syntax for High Capacity Automatic Data Capture Media. (4) Unique item identifier. (i) The Contractor shall— (A) Determine whether to— (1) Serialize within the enterprise identifier; (2) Serialize within the part, lot, or batch number; or (3) Use a DoD recognized unique identification equivalent; and (B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in the version of MIL-STD-130, Identification Marking of U.S. Military Property, cited in the contract Schedule. (ii) The issuing agency code— (A) Shall not be placed on the item; and (B) Shall be derived from the data qualifier for the enterprise identifier. (d) For each item that requires unique item identification under paragraph (c)(1)(i) or (ii) of this clause, in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, either as part of, or associated with, the Material Inspection and Receiving Report, the following information: (1) Unique item identifier. (2) Unique item identifier type. (3) Issuing agency code (if concatenated unique item identifier is used). (4) Enterprise identifier (if concatenated unique item identifier is used). (5) Original part number (if there is serialization within the original part number). (6) Lot or batch number (if there is serialization within the lot or batch number). (7) Current part number (optional and only if not the same as the original part number). (8) Current part number effective date (optional and only if current part number is used). (9) Serial number (if concatenated unique item identifier is used). (10) Government’s unit acquisition cost. (11) Unit of measure. (e) For embedded subassemblies, components, and parts that require DoD unique item identification under paragraph (c)(1)(iii) of this clause, the Contractor shall report as part of, or associated with, the Material Inspection and Receiving Report specified elsewhere in this contract, the following information: (1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part. (2) Unique item identifier of the embedded subassembly, component, or part. (3) Unique item identifier type.** (4) Issuing agency code (if concatenated unique item identifier is used).** (5) Enterprise identifier (if concatenated unique item identifier is used).** (6) Original part number (if there is serialization within the original part number).** (7) Lot or batch number (if there is serialization within the lot or batch number).** (8) Current part number (optional and only if not the same as the original part number).** (9) Current part number effective date (optional and only if current part number is used).** (10) Serial number (if concatenated unique item identifier is used).** (11) Description. ** Once per item. (f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause in accordance with the data submission procedures at http://www.acq.osd.mil/dpap/pdi/uid/data_submission_information.html. (g) Subcontracts. If the Contractor acquires by subcontract, any item(s) for which unique item identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s). (End of clause) 252.212-7001 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS APPLICABLE TO DEFENSE ACQUISITIONS OF COMMERCIAL ITEMS (DEC 2010) (DEVIATION) (a) In addition to the clauses listed in paragraph (b) of the Contract Terms and Conditions Required to Implement Statutes or Executive Orders--Commercial Items clause of this contract (FAR 52.212-5) (OCT 2010) (DEVIATION), the Contractor shall include the terms of the following clause, if applicable, in subcontracts for commercial items or commercial components, awarded at any tier under this contract: 252.237-7010 Prohibition on Interrogation of Detainees by Contractor Personnel (NOV 2010) (Section 1038 of Pub. L. 111-84). 252.237-7019 Training for Contractor Personnel Interacting with Detainees (SEP 2006) (Section 1092 of Pub. L. 108-375). 252.247-7003 Pass-Through of Motor Carrier Fuel Surcharge Adjustment to the Cost Bearer (JUL 2009) (Section 884 of Public Law 110-417) 252.247-7023 Transportation of Supplies by Sea (MAY 2002) (10 U.S.C. 2631) 252.247-7024 Notification of Transportation of Supplies by Sea (MAR 2000) (10 U.S.C. 2631) (End of clause) 5352.201-9101 OMBUDSMAN (APR 10) (a) An ombudsman has been appointed to hear and facilitate the resolution of concerns from offerors, potential offerors, and others for this acquisition. When requested, the ombudsman will maintain strict confidentiality as to the source of the concern. The existence of the ombudsman does not affect the authority of the program manager, contracting officer, or source selection official. Further, the ombudsman does not participate in the evaluation of proposals, the source selection process, or the adjudication of protests or formal contract disputes. The ombudsman may refer the party to another official who can resolve the concern. (b) Before consulting with an ombudsman, interested parties must first address their concerns, issues, disagreements, and/or recommendations to the contracting officer for resolution. Consulting an ombudsman does not alter or postpone the timelines for any other processes (e.g., agency level bid protests, GAO bid protests, requests for debriefings, employee-employer actions, contests of OMB Circular A-76 competition performance decisions). (c) If resolution cannot be made by the contracting officer, concerned parties may contact the USAF Academy Ombudsmen, Kelly S. Snyder 8110 Industrial Drive, Ste 103 USAFA, CO 80840 Telephone number 719-333-2074 FAX 719-333-9018 Email: kelly.snyder@us.af.mil Concerns, issues, disagreements, and recommendations that cannot be resolved at the MAJCOM/DRU level, may be brought by the concerned party for further consideration to the Air Force ombudsman, Associate Deputy Assistant Secretary (ADAS) (Contracting), SAF/AQC, 1060 Air Force Pentagon, Washington DC 20330-1060, phone number (703) 588-7004, facsimile number (703) 588-1067. (d) The ombudsman has no authority to render a decision that binds the agency. (e) Do not contact the ombudsman to request copies of the solicitation, verify offer due date, or clarify technical requirements. Such inquiries shall be directed to the Contracting Officer. (End of clause) 5352.242-9000 CONTRACTOR ACCESS TO AIR FORCE INSTALLATIONS (AUG 07) (a) The contractor shall obtain base identification and vehicle passes, if required, for all contractor personnel who make frequent visits to or perform work on the Air Force installation(s) cited in the contract. Contractor personnel are required to wear or prominently display installation identification badges or contractor-furnished, contractor identification badges while visiting or performing work on the installation. (b) The contractor shall submit a written request on company letterhead to the contracting officer listing the following: contract number, location of work site, start and stop dates, and names of employees and subcontractor employees needing access to the base. The letter will also specify the individual(s) authorized to sign for a request for base identification credentials or vehicle passes. The contracting officer will endorse the request and forward it to the issuing base pass and registration office or security police for processing. When reporting to the registration office, the authorized contractor individual(s) should provide a valid driver’s license, current vehicle registration, valid vehicle insurance certificate, and (refer to USAFA A-01 Contractor Access to USAFA Instruction) to obtain a vehicle pass. (c) During performance of the contract, the contractor shall be responsible for obtaining required identification for newly assigned personnel and for prompt return of credentials and vehicle passes for any employee who no longer requires access to the work site. (d) When work under this contract requires unescorted entry to controlled or restricted areas, the contractor shall comply with [insert any additional requirements to comply with AFI 31-101, Volume 1, The Air Force Installation Security Program, and AFI 31-501, Personnel Security Program Management,] citing the appropriate paragraphs as applicable. (e) Upon completion or termination of the contract or expiration of the identification passes, the prime contractor shall ensure that all base identification passes issued to employees and subcontractor employees are returned to the issuing office. (f) Failure to comply with these requirements may result in withholding of final payment. (End of clause) ATTACHMENTS: 1. DFARS 252.225-7000 Buy American Statute – Balance of Payments Program Certificate
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/DRU/10ABWLGC/FA7000-13-T-0007/listing.html)
- Place of Performance
- Address: United States Air Force Academy, USAFA, Colorado, 80840, United States
- Zip Code: 80840
- Zip Code: 80840
- Record
- SN02919347-W 20121027/121025234124-2a564347dffd5abe8511801a2cbbf02a (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |