SOURCES SOUGHT
58 -- FMS Case LG-B-UBT
- Notice Date
- 9/27/2012
- Notice Type
- Sources Sought
- Contracting Office
- ACC-APG - Aberdeen Division B, HQ CECOM CONTRACTING CENTER, 6001 COMBAT DRIVE, ABERDEEN PROVING GROU, MD 21005-1846
- ZIP Code
- 21005-1846
- Solicitation Number
- MARKET-SURVEY-5334-1
- Response Due
- 10/12/2012
- Archive Date
- 12/11/2012
- Point of Contact
- Tineka C. Davis, 443-861-5437
- E-Mail Address
-
ACC-APG - Aberdeen Division B
(tineka.c.davis.civ@mail.mil)
- Small Business Set-Aside
- N/A
- Description
- FOR MORE INFORMATION PLEASE CONTACT: Mitch Jacquay 443-861-5671, Franklin Lee 443-861-5667, Tony Blais 443-861-5672 Correction/Clarification to Hardware Description for Market Survey 5332-1 You must respond NO LATER than the Respond Date and Time The ACC-APG -C4ISR intends to acquire the following: THERMAL IMAGING PERFORMANCE S100 Hardware Specifications: Sensor type 320 x 240 InSb Field of view 3.67 h x 2.75 v Spectral band 3-5 m Focal length 150 mm OUTPUTS Video RS-170A compatible Connector types BNC POWER Power requirements 7 hours with 6 CR123A batteries at 23 C (will operate on as few as 2 CR123A batteries) ENVIRONMENTAL Operating temp -40 C to 49 C (-26 F to 120 F) Storage temp -40 C to 71 C (-35 F to 160 F) Waterproof Immersible to 3 ft for 4 hours DIMENSIONS, WEIGHT & MOUNTING S100 HISS Dimensions 4.2 w x 3.6 h x 10.6 l in Weight Less than 1.6 kg (3.5 lbs) including batteries Mounting Picatinny Rail (requires 6" of rail space in front of day scope) INCLUDED ACCESSORIES IN STANDARD PACKAGE Storage/transport case Soft side case External power adapter 6-28 VDC input Batteries 12 each CR123A Lens caps Attached to camera Lens cleaning kit Quick Reference Guide and Manual Spacers (2) MOA with adapters for 20 MOA and 30 MOA Remote Control Wire pendant controller FOR MORE INFORMATION PLEASE CONTACT Mitch Jacquay, EMAIL mitchell.a.jacquay.civ@mail.mil, Franklin Lee, EMAIL franklin.f.lee.ctr@mail.mil, Tony Blais EMAIL anthony.w.blais.civ@mail.mil REQUIRED INFORMATION: 1If you are a reseller/distributor you MUST disclose the manufacturer of the item. 2A quality system to monitor all phases of manufacturing will be requested after contract award. 3. Identify whether you are a small or large business 4. If you are a small business then identify your subcategory, i.e. 8A, SDB, SDVOB, etc. 5. You MUST state delivery ARO of all HARDWARE. 6. You MUST reference the FMS case designator on you formal solicitation. 7. You MUST provide a specification data sheet. Respond to My Attention by COB Eastern on 12 Oct 2012
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/7724b4895f0280858f6ebb57dfe022f1)
- Place of Performance
- Address: ACC-APG - Aberdeen Division B HQ CECOM CONTRACTING CENTER, 6001 COMBAT DRIVE ABERDEEN PROVING GROU MD
- Zip Code: 21005-1846
- Zip Code: 21005-1846
- Record
- SN02902205-W 20120929/120928000751-7724b4895f0280858f6ebb57dfe022f1 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |