SOLICITATION NOTICE
J -- WMEC 210' and 270' Drydock Maintenance and Repairs
- Notice Date
- 9/25/2012
- Notice Type
- Presolicitation
- NAICS
- 336611
— Ship Building and Repairing
- Contracting Office
- Department of Homeland Security, United States Coast Guard (USCG), USCG Surface Forces Logistics Center (SFLC) Procurement Branch 1, 300 East Main Street, Suite 600, Norfolk, Virginia, 23510-9102, United States
- ZIP Code
- 23510-9102
- Solicitation Number
- HSCG8013RP45068
- Archive Date
- 9/25/2013
- Point of Contact
- Arlene V Woodley, Phone: (757) 628-4645
- E-Mail Address
-
Arlene.V.Woodley@uscg.mil
(Arlene.V.Woodley@uscg.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- The United States Coast Guard Surface Forces Logistics Center (SFLC) intends to issue a Commercial Request for Proposal (RFP) that will result in the award of an Indefinite Delivery/Indefinite Quantity (IDIQ) Firm-Fixed-Price Multiple Award Task Order Contract (MATOC), for Dry Dock Maintenance and Repairs on 210' and 270' Medium Endurance Cutters, in the three (3) Regions: West Coast, Northeast, and Southeast. The West Coast Region will encompass the entire West Coast. The Northeast Region of the East Coast will encompass the states of Main, Massachusetts, New Jersey, and Virginia. The Southeast Region of the East Coast will encompass the states of Virginia, North Carolina, South Carolina, Florida, Mississippi and Texas. The Government intends to award multiple awards. The Coast Guard intends to conduct the procurement in accordance with Federal Acquisition Regulation (FAR) Part 12, Acquisition of Commercial Items, and FAR Part 15, Contracting by Negotiation. This acquisition will be solicited in accordance with FAR Part 19.502-2 Total Small Business Set-Asides. This acquisition is limited to small businesses firms located within the regions; West Coast, Northeast, and Southeast. The solicitation will be issued electronically, on or about October 10, 2012, via the Federal Business Opportunity web page at http://www.fbo.gov. It is incumbent upon contractors to monitor the FEDBIZOPS web page for the RFP release and all subsequent amendments. Hard copies of the specification and solicitation will not be issued. The NAICS Code is 336611. GEOGRAPHIC RESTRICTION: Geographic restriction may be implemented at the Task Order level due to operational requirements and/or urgent repairs. Any geographic restrictions will be identified at the Task Order level and implemented accordingly. All work will be performed at the contractor's facility. The performance period for this requirement includes one base year and four option years. From date of contract award through one year for the base period, and additional one year periods for each option exercised. The Performance Period for each individual requirement will be designated on each Task Order. The scope of the acquisition for the WMEC 210 "A&B Class" will include, but is not limited to: 1. Hull Plating (Side Scan), Ultrasonic Testing 2. Hull Plating (U/W Body), Ultrasonic Testing 3. Hull Plating Freeboard, Preserve "100%" (A-Class) 4. Hull Plating Freeboard, Preserve "100%" (B-Class) 5. Hull Plating Freeboard, Preserve "Partial" (A-Class) 6. Hull Plating Freeboard, Preserve "Partial" (B-Class) 7. Perform Ultrasonic Thickness Measurements - Steel Plating 8. Stern Tube Interior Surfaces, Preserve 100% (A-Class) 9. Stern Tube Interior Surfaces, Preserve 100% (B-Class) 10.U/W Body, Preserve (100%) 11.U/W Body, Preserve (Partial-Condition A) 12.U/W Body, Preserve (Partial-Condition B) 13.U/W Body, Preserve (Partial-Condition C) 14.Hull and Structural Plating - ¼" to ¾" Steel Plate, Renew 15.Hull and Structural Plating - ¼" to ½" Aluminum Plate, Renew 16.Bilge (Machinery Space), Preserve "Partial" 17.Bilge (Non-Machinery Space), Preserve "Partial" 18.Appendages (U/W), Leak Test 19.Appendages (U/W), Internal, Preserve 20.Propulsion Shaft Fairwaters and Rope Guards, Inspect and Repair 21.Propulsion Shaft Strut Bearing Housings, Inspect, (A-Class) 22.Propulsion Shaft Strut Bearing Housings, Inspect, (B-Class) 23.Chain Locker, Clean and Inspect 24.Chain Locker, Preserve Partial 25.Chain Locker, Preserve "100%" 26.Tank (Forepeak Ballast), Clean and Inspect 27.Tank (Forepeak Ballast), Preserve "Partial" 28.Tank (Forepeak Ballast), Preserve "100%" 29.Tank Contents, Remove and Dispose 30.Tanks (Aviation Fuel Service and Stowage), Clean and Inspect 31.Tanks (Aviation Fuel Service and Stowage), Preserve "Partial" 32.Tanks (Aviation Fuel Service and Stowage), Preserve "100%" 33.Tanks (Lube Oil, Dirty Oil, Hydraulic Oil), Clean and Inspect 34.Tanks (Lube Oil, Dirty Oil, Hydraulic Oil), Preserve "Partial" 35.Tanks (Lube Oil, Dirty Oil Hydraulic Oil), Preserve "100%" 36.Tanks (MP Fuel Storage, Service, and Overflow), Clean and Inspect 37.Tanks (MP Fuel Storage, Service, and Overflow), Preserve "Partial" 38.Tanks (MP Fuel Storage, Service and Overflow), Preserve "100%" 39.Tanks (Potable Water), Clean and Inspect 40.Tanks (Potable Water), Preserve "Partial" 41.Tanks (Potable Water), Preserve "100%" 42.Voids (Accessible), Preserve "Partial" 43.Voids (Accessible), Preserve "100%" 44.Voids (Non-Accessible), Leak Test 45.Voids (Non-Accessible), Preserve Internal Surfaces 46.Superstructure, Preserve "Partial" 47.Superstructure, Preserve "100" 48. Main Mast, Preserve "Partial" 49. Main Mast, Preserve "100%" 50.Propeller Shaft Sleeves, Renew (A-Class) 51.Propeller Shaft Sleeves, Renew (B-Class) 52.Propulsion Intermediate (Line) Shafts, Inspect (A-Class) 53. Propulsion Intermediate (Line) Shafts, Inspect (B-Class) 54.Propulsion Propeller (Tail) Shaft Coating, Renew (A-Class) 55.Propulsion Propeller (Tail) Shaft Coating, Renew (B-Class) 56.Propulsion Propeller (Tail) Shafts, Inspect In-Place (A-Class) 57.Propulsion Propeller (Tail) Shafts, Inspect In-Place (B-Class) 58. Propulsion Propeller Shaft, Renew, (A-Class) 59.Propulsion Propeller Shaft, Renew, (B-Class) 60.Propulsion Shaft Seal (Mechanical and Inflatable) Assemblies, Overhaul or Renew (A-Class) 61.Propulsion Shaft Seal (Mechanical and Inflatable) Assemblies, Overhaul or Renew (B-Class) 62.Propulsion Shafting, Optical or Laser Alignment Check (A-Class) 63.Propulsion Shafting, Optical or Laser Alignment Check (B-Class) 64.Propulsion Shafting, Straighten (A-Class) 65.Propulsion Shafting, Straighten (B-Class 66.Propulsion Shafting, Strain Gage Alignment Inspections 67.Propulsion Line Shaft Bearings (Internal), Check Clearances 68. Propulsion Shaft Bearings (External), Check Clearances (A-Class) 69. Propulsion Shaft Bearings (External), Check Clearances (B-Class) 70. Propulsion Shaft Bearings (External), Renew (A-Class) 71. Propulsion Shaft Bearings (External, Renew (B-Class) 72. Controllable Pitch Propeller (CPP) Hub Assembly, Renew (A-Class) 73.Controllable Pitch Propeller (CPP) Hub Assembly, Renew (B-Class) 74.Controllable Pitch Propeller (CPP) Oil Distribution (OD) Box, Inspect and Service (A-Class) 75.Controllable Pitch Propeller (CPP) Oil Distribution (OD) Box, Inspect and Service (B-Class) 76.Controllable Pitch Propeller (CPP) System, Inspect and Service (A-Class) 77.Controllable Pitch Propeller (CPP) System, Inspect and Service (B-Class) 78.Controllable Pitch Propeller (CPP), Clean and Inspect (A-Class) 79.Controllable Pitch Propeller (CPP), Clean and Inspect (B-Class 80.Fathometer Transducer, Renew 81.Doppler Speed Log Transducer, Renew 82.Fuel Piping, Renew 83.Sea Water Piping, Renew 84.Sea Strainers - Duplex (All Sizes), Overhaul 85.Sea Strainers - Simplex (All Sizes), Renew 86.Sea Valves and Waster Pieces, Overhaul or Renew 87.Sea Valves (Non-Skin Valves) and Waster Pieces, Overhaul or Renew 88.Fuel Manifold, Overhaul 89.Fuel Valves, Overhaul or Renew 90.Rudder Assembly; Remove, Inspect and Reinstall (A-Class) 91.Rudder Assembly; Remove, Inspect and Reinstall (B-Class) 92.Rudder Stock Bearings, Check Clearances (A-Class) 93. Rudder Stock Bearings, Check Clearances (B-Class) 94. Cathodic Protection (Zincs), Renew 95.Drydocking (A-Class) 96.Drydocking (B-Class) 97.Temporary Services, Provide 98.Sea Trial Performance, Provide Support 99.Additional Interference Removal and Reinstallation The scope of the acquisition for the WMEC 270 "A&B Class" will include, but is not limited to: 1. Hull Plating (Side Scan), Ultrasonic Testing 2. Hull Plating (U/W Body), Ultrasonic Testing 3. Hull Plating Freeboard, Preserve ("100%") 4. Hull Plating Freeboard, Preserve ("Partial") 5. Perform Ultrasonic Thickness Measurements - Steel Plating 6. Stern Tube Interior Surfaces, Preserve 100% (A-Class) 7. Stern Tube Interior Surfaces Preserve 100% (B-Class) 8. U/W Body, Preserve ("100%") 9. U/W Body, Preserve ("Partial-Condition A") 10.U/W Body, Preserve ("Partial-Condition B") 11.U/W Body, Preserve ("Partial-Condition C") 12.Hull and Structural Plating - ¼" to ¾" Steel Plate, Renew 13.Hull and Structural Plating - ¼" to ½" Aluminum Plate, Renew 14.Bilge (Machinery Space), Preserve "Partial" 15.Bilge (Non-Machinery Space), Preserve "Partial" 16.Appendages (U/W), Leak Test 17.Appendages (U/W), Internal Preserve 18.Propulsion Shaft Fairwaters and Rope Guards, Inspect and Repair 19.Propulsion Shaft Fairwaters and Rope Guards, Renew 20.Propulsion Shaft Strut Bearing Housings, Inspect, (A-Class) 21.Propulsion Shaft Strut Bearing Housings, Inspect, (B-Class) 22.Chain Lockers, Clean and Inspect 23.Chain Locker, Preserve Partial 24.Chain Locker, Preserve 100% 25.Tank Contents, Remove and Dispose 26.Tanks (Aviation Fuel Service, Stowage, and Overflow), Clean and Inspect 27.Tanks (Aviation Fuel Service, Stowage, and Overflow), Preserve, "Partial" 28.Tanks (Aviation Fuel Service, Stowage, and Overflow), Preserve, "100%" 29.Tanks (Ballast), Clean and Inspect 30.Tanks (Ballast), Preserve "Partial" 31.Tanks (Ballast), Preserve "100%" 32.Tanks (Lube Oil, Dirty Oil, Hydraulic Oil), Clean and Inspect 33.Tanks (Lube Oil, Dirty Oil, Hydraulic Oil), Preserve, "Partial" 34.Tanks (Lube Oil, Dirty Oil, Hydraulic Oil), Preserve, "100%" 35.Tanks (MP Fuel Service, Stowage, and Overflow), Clean and Inspect 36. Tanks (MP Fuel Service, Stowage, and Overflow), Preserve "Partial" 37.Tanks (MP Fuel Service, Stowage, and Overflow), Preserve "100%" 38.Tank (Potable Water Pneumatic), Clean and Inspect 39.Tanks (Potable Water), Preserve "Partial" 40.Tanks (Potable Water), Preserve "100%" 41.Voids (Accessible), Preserve "Partial" 42.Voids (Accessible), Preserve "100%" 43.Voids (Non-Accessible), Leak Test 44.Voids (Non-Accessible), Preserve Internal Surfaces 45.Superstructure, Preserve "Partial" 46.Superstructure, Preserve "100%" 47.Main Mast, Preserve "Partial" 48.Main Mast, Preserve "100%" 49.Propulsion Intermediate Shafts, Inspect In-Place, (A-Class) 50.Propulsion Intermediate Shafts, Inspect In-Place, (B-Class) 51.Propulsion Intermediate Shafts, Renew, (A-Class) 52.Propulsion Intermediate Shafts, Renew (B-Class) 53.Propulsion Propeller (Tail) Shaft Coating, Renew, (A-Class) 54.Propulsion Propeller (Tail) Shaft Coating, Renew, (B-Class) 55.Propulsion Propeller Shaft, Renew, (A-Class) 56.Propulsion Propeller Shaft, Renew, (B-Class) 57.Propulsion Propeller Shafts, Inspect In-Place (A-Class) 58.Propulsion Propeller Shafts, Inspect In-Place (B-Class) 59.Propulsion Shaft Seal (Mechanical and Inflatable) Assemblies, Overhaul or Renew 60.Propulsion Shaft Seal (Mechanical and Inflatable) Assemblies, Overhaul or Renew 61.Propulsion Shafting, Optical or Laser Alignment Check (A-Class) 62. Propulsion Shafting, Optical or Laser Alignment Check (B-Class) 63.Propulsion Shafting Straighten 64.Propulsion Shafting, Strain Gage Alignment Inspections 65.Propulsion Thrust Shaft, Remove, Inspect, and Reinstall (A-Class) 66.Propulsion Thrust Shaft, Renew, (A-Class) 67.Propulsion Thrust Shafts, Inspect In-Place, (A-Class) 68.Line Shaft (Pedestal) Bearing, Renew, (B-Class) 69.Line Shaft (Pedestal) Bearings, Check Clearances (B-Class) 70.Propulsion Shaft Bearings (External), Check Clearances, (A-Class) 71.Propulsion Shaft Bearings (External), Check Clearances, (B-Class) 72.Propulsion Shaft Bearings (External), Renew, (A-Class) 73.Propulsion Shaft Bearings (External), Renew, (B-Class) 74.Thrust Bearings, Check Clearances, (A-Class) 75.Thrust Bearing, Renew, (A-Class) 76.Controllable Pitch Propeller (CPP) Hub Assembly, Renew, (A-Class) 77.Controllable Pitch Propeller (CPP) Hub Assembly, Renew, (B-Class) 78.Controllable Pitch Propeller (CPP) Oil Distribution (OD) Box, Inspect and Service (A-Class) 79.Controllable Pitch Propeller (CPP) Oil Distribution (OD) Box, Inspect and Service (B-Class) 80.Controllable Pitch Propeller (CPP) System, Inspect and Service, (A-Class) 81.Controllable Pitch Propeller (CPP) System, Inspect and Service, (B-Class) 82.Controllable Pitch Propeller (CPP), Clean and Inspect (A-Class) 83.Controllable Pitch Propeller (CPP), Clean and Inspect (B-Class) 84.Fathometer Transducers, Renew 85.Doppler Speed Log Transducer, Renew 86.Sea Water Piping, Renew 87.Fuel Piping, Renew 88.Sea Strainers - Duplex (All Sizes), Overhaul 89.Sea Strainers - Simplex (All Sizes), Clean and Inspect 90.Sea Valves and Waster Pieces, Overhaul or Renew, (A-Class) 91.Sea Valves and Waster Pieces, Overhaul or Renew, (B-Class) 92.Sea Valves (Non-Skin Valves) and Waster Pieces, Overhaul or Renew 93.Fuel Manifold, Overhaul 94.Fuel Valves, Overhaul or Renew 95.Rudder Assembly; Remove, Inspect and Reinstall (A-Class) 96.Rudder Assembly; Remove, Inspect and Reinstall (B-Class) 97.Rudder Stock Bearings, Check Clearances (A-Class) 98.Rudder Stock Bearings, Check Clearance (B-Class) 99.Fin Stabilizer Shaft Sleeve, Renew, (A-Class) 100.Fin Stabilizer Shaft Sleeve, Renew, (B-Class) 101.Fin Stabilizer General Overhaul, (A-Class) 102.Fin Stabilizer General Overhaul, (B-Class) 103.Cathodic Protection (Zincs), Renew 104.Drydocking (A-Class) 105.Drydocking (B-Class) 106.Temporary Services, Provide 107.Sea Trial Performance, Provide Support 108.Additional Interference Removal and Reinstallation A CD-ROM containing all applicable drawings will be sent via U.S. mail, if requested. Send all requests via e-mail to: arlene.v.woodley@uscg.mil. The CD-ROM sets are available of all cutters and will be free of charge to contractors upon request. The CD-ROM(s) contain WINDOWS compliant raster/vector formats (e.g.*.DWF, etc). For further information or questions regarding this solicitation, please contact Arlene Woodley at (757) 628-4645, or by email at arlene.v.woodley@uscg.mil.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DHS/USCG/COUSCGMLCA/HSCG8013RP45068/listing.html)
- Record
- SN02897761-W 20120927/120926001945-9962e725eaa1c2f5586b3998162ef727 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |