SOLICITATION NOTICE
16 -- BED ASSEMBLY,SIEVE
- Notice Date
- 9/20/2012
- Notice Type
- Presolicitation
- NAICS
- 336413
— Other Aircraft Parts and Auxiliary Equipment Manufacturing
- Contracting Office
- DLA AVIATION AT OKLAHOMA CITY, OK; DLR PROCUREMENT OPERATIONS(AO);3001 STAFF DRIVE; TINKER AFB; OK; 73145
- ZIP Code
- 73145
- Solicitation Number
- SPRTA1-12-Q-0425
- Response Due
- 9/20/2012
- Archive Date
- 12/19/2012
- Point of Contact
- Robin Adee, Phone 405-734-1947, Fax - -, Emailrobin.adee@tinker.af.mil - Tonya Kirk, Phone 405-739-8964, Fax - -, Email tonya.kirk@tinker.af.mil
- E-Mail Address
-
Robin Adee
(robin.adee@tinker.af.mil)
- Small Business Set-Aside
- N/A
- Description
- PR Number(s): FD20301201172 Item: 0001 NSN: 1660013392218BO BED ASSEMBLY,SIEVE P/N: 8148650, P/N: 1648950-1, Description: OXYYGEN LIFE SUPPORT EQUIPMENT BED ASSY OPERATES USING PRESSURE SWING ABSORPTION PROCESS TO PRODUCE OXYGEN ENRICHED GAS. NITROGEN IN THE PRESSURIZED AIR IS ABSORBED IN THE BED IN THE BED OF THE SIEVE WHILE OXYG EN PASSES THRU USING 2 BEDS WHICH ARE Supp. Description: aluminum alloy Quantity: 2.0000 EA Destn: FMS COUNTRIES. PR Number(s): FD20301201172 Item: 0002 NSN: 1660013392218BO BED ASSEMBLY,SIEVE P/N: 8148650, P/N: 1648950-1, Description: Quantity: 3.0000 EA Destn: FMS COUNTRIES. Duration of Contract Period: 27 February 2013 Electronic procedure will be used for this solicitation. IAW FAR 5.207(c)(15)(ii), All responsible sources may submit a capability statement, proposal, or quotation, which shall be considered by the agency Synopsis FD2030-12-01172 AMC: 3/D 1.Estimated issue date 20 September 2012 and estimated closing/response date 27 September 2012. 2.RFP #: SPRTA1-12-Q-0425 3.PR#: FD2030-12-01172 4.Nomenclature/Noun: Bed Assembly, Sieve 5.NSN: 1660-01-339-2218BO 6.P/N: 1648950-1 7.Application (Engine or Aircraft): F15E 8.AMC: 3/D 9.History: Previously purchased 8 each from Carleton Life Support Systems, Inc. on contract FA810304M0061 on 26 Nov 2003 and 25 each from Carleton Life Support Systems, Inc. on contract F3460103M0269 on 7 March 2003. 10.Description/Function: It is an oxygen life support equipment bed assembly. Operates using pressure swing absorption process to produce oxygen enriched gas. Nitrogen in the pressurized air is absorbed in the bed of the sieve while oxygen passes thru using 2 beds which are pressurized and flushed alternatively, provides a continuous flow of product gas. 11.Dimensions: Approximately 9.6000 inches in length, 7.5000 inches in width and 8.5000 inches in height and 2.5000 lbs in weight. 12.Material: Aluminum Alloy 13.Qualified Sources: Carleton Life Support Systems, Inc: Cage code 99251 14. Qualification requirements: Are not applicable. 15.First Article is not required for the original equipment manufacturer. 16.Export Control: Does not apply 17.Required Delivery: 22 each on or before 27 February 2013. 18.Destination: FMS Requirement 19.Mandatory Language: Oral procedures will be used for this solicitation. Authority: 10 U.S.C. 2304(c) (1), Justification: supplies (or Services) required are available from only or a limited number of responsible sources(s) and no other type of supplies or services will satisfy agency requirements. The proposed contract action is for supplies and services for which the Government intends to solicit and negotiate with only one, or a limited number of sources under the authority of FAR 6.302. The solicitation will identify the office where additional information can be obtained concerning qualifications requirements as cited in each individual solicitation. Note: An Ombudsman has been appointed to hear concerns from offerors or potential offerors during the proposal development phase of this acquisition. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call Ombudsman at (405) 734-8241. DO NOT CALL THIS NUMBER FOR SOLICITATION REQUESTS. For qualification information/source approval request contact the buyer listed below at (405)734-1947 or robin.adee@tinker.af.mil. Note: Faxed solicitation requests can be submitted to DLA-Aviation-OKC-AOAA, Tinker AFB, OK 73145, FAX NUMBER (405) 739-4237. 20.UID: If unit price exceeds $5,000.00 then UID requirements will apply. 21.This procurement is not a total Small Business Set Aside
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/AFMC/OCALCCC/SPRTA1-12-Q-0425/listing.html)
- Record
- SN02892638-W 20120922/120921002737-7d19dbfbffea47b1c9fd9ee7985179fc (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |