MODIFICATION
20 -- Scheduled Dock-Side Repairs for The USCGC GEORGE COBB (WLM-564) 100 Foot Coastal Buoy Tender
- Notice Date
- 9/14/2012
- Notice Type
- Modification/Amendment
- NAICS
- 336611
— Ship Building and Repairing
- Contracting Office
- Department of Homeland Security, United States Coast Guard (USCG), USCG Surface Forces Logistics Center (SFLC) Procurement Branch 2, 1301 Clay St., Suite 807N, Oakland, California, 94612-5249, United States
- ZIP Code
- 94612-5249
- Solicitation Number
- HSCG85-13-Q-P45M53
- Archive Date
- 11/3/2012
- Point of Contact
- Jack Rodman, Phone: (510) 637-5988, Jay S McReynolds, Phone: 510-637-5975
- E-Mail Address
-
Jack.E.Rodman@uscg.mil, jay.s.mcreynolds@uscg.mil
(Jack.E.Rodman@uscg.mil, jay.s.mcreynolds@uscg.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- The United States coast guard surface forces Logistics Center, Contracting and Procurement branch 2 IBCT Product Line intends to issue a Commercial Request for Quote for Dockside Repairs for the United States Coast Guard Cutter: GEORGE COBB (WLM-564). The Coast Guard intends to conduct the procurement in accordance with Federal Acquisition Regulation (FAR) Part 12, Acquisition of Commercial Items. The NAICS Code is 336611 and the small business size standard is less than 1000 employees. The simplified acquisition will be issued as a Best Value for Quote (RFQ) on or about August 14, 2012. The RFQ will be issued via the Federal business Opportunity (FEDBIZOPPS) website at http://www.fbo.gov/. This requirement will be evaluated using price and past performance as an evaluation factors. Hard copies solicitation will not be issued. It is incumbent upon the contractors to monitor the FEDBIZOPPS website for RFQ release and all subsequent amendments. FEDBIZOPPS also contains an optional automatic notification service. THE ACQUISITION WILL BE SOLICITED AS A TOTAL SMALL BUSINESS SET-ASIDE. The performance period will be based following Cutter's Availability dates and completion time: USCGC GEORGE COBB (WLM-564) will be available from January 8, 2013 through February 19, 2013 forty-two (42) days after vessel becomes available. PLACE OF PERFORMANCE: The place of performance will be at the Cutter's Home Port: USCGC GEORGE COBB (WLM-564), 1001 South Seaside Ave, San Pedro, California 90731. DESCRIPTION OF WORK The scope of the acquisition is for the overhauling, cleaning and repairing of various items aboard the USCGC GEORGE COBB (WLM-564) This work will include, but is not limited to: ITEM DESCRIPTION D-001 Chain Lockers, Clean and Inspect JOB D-002 Main Diesel Engine (MDE) Exhaust Stack Uptakes, Clean JOB D-003 Ship Service Diesel Generator (SSDG) Exhaust Piping, Commercial Clean JOB D-004 Vent Ducts ( Engine and Motor Room All ), Commercial Cleaning JOB D-005 Vent Ducts ( Galley and Pantry Room All ), Commercial Cleaning JOB D-006 Anchor Chain and Ground Tackle, Preserve JOB D-007 Decks - Exterior( Buoy ), Preserve 100% JOB D-008 Hull Plating Freeboard (Buoy Port Areas), Preserve - Partial JOB D-009 Hot Water Accumulator Tanks, Clean and Inspect JOB D-010 Hull Fittings (Weight Handling Rigging Hardware), Inspect and Test JOB D-011 Cargo Hold Deck, Preserve 100% JOB D-012 Vent Ducts (All Other), Commercial Cleaning JOB D-013 Hydraulic Chain Stoppers, Overhaul and Repair JOB D-014 Hydraulic Inhaul Winch, Repair JOB D-015 Anchor Windlass Inspect, and Repair JOB D-016 Single Point Davit, Inspect and Repair JOB D-017 Buoy Crane, Inspect and Repair JOB D-018 ASW Pump(s), Overhaul JOB D-019 Deck Covering (Electrical Matting), Remove and Reinstall JOB D-020 Cargo Hatch and Hawser Pipe, Preserve JOB D-021 Potable Water Valves, Renew JOB D-022 Main Drainage Valves, Renew JOB D-023 Cargo Hatch, Repair and Test JOB D-024 Buoy Deck Control Room Window Renew JOB O-00A Composite Labor Rate Hour 400 D-00B GFP Report NSP EA NSP D-00C Travel and Perdiem JOB The Specification for this project is posted with this pre-solicitation synopsis for review and comments from interested parties. Potential contractors are Strongly Encouraged to make a Ship Check. For access please contact EMCS James Cullers (310) 521-4580 email: James.D.Cullers@uscg.mil or LTJG Robert K. Woods at (510) 637-5852 email: Robert.K.Woods2@uscg.mil Drawings on CD-ROM will be free of charge to contractors upon request. Contractors may contact Jack Rodman at (510) 637-5988 or email: Jack.E.Rodman@uscg.mil. or Jay McReynolds (510) 637-5975 email: Jay.S.McReynolds@uscg.mil CERTIFICATIONS: All welding and brazing shall be accomplished by trained welders who have been certified by the applicable regulatory code performance qualification procedures. For further information or questions regarding this solicitation, please contact Jack Rodman at (510) 637-5988 or via email: Jack.E.Rodman@uscg.mil or Jay McReynolds at (510) 637-5975 or email: Jay.S.McReynolds@uscg.mil
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DHS/USCG/VPLMLCP/HSCG85-13-Q-P45M53/listing.html)
- Place of Performance
- Address: USCGC GEORGE COBB (WLM-564), 1001 South Seaside Ave, San Pedro, California, 90731, United States
- Zip Code: 90731
- Zip Code: 90731
- Record
- SN02883283-W 20120916/120915000215-3d950c2ce87d02fdf6419b3304e2d088 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |