MODIFICATION
58 -- Mobile Radio System for Grand Forks AFB
- Notice Date
- 9/13/2012
- Notice Type
- Modification/Amendment
- NAICS
- 334220
— Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing
- Contracting Office
- Department of the Air Force, Air Mobility Command, 319 CONF, 575 Tuskegee Airmen Blvd, Building 418, Grand Forks AFB, North Dakota, 58205, United States
- ZIP Code
- 58205
- Solicitation Number
- FA4659-12-Q-0043
- Point of Contact
- Peter Burke, Phone: 7017473023, Jeremiah J Snedker, Phone: (701) 747-5299
- E-Mail Address
-
peter.burke.2@us.af.mil, jeremiah.snedker@us.af.mil
(peter.burke.2@us.af.mil, jeremiah.snedker@us.af.mil)
- Small Business Set-Aside
- N/A
- Description
- THIS IS A SOURCES SOUGHT ANNOUNCEMENT FOR INFORMATION ONLY. THIS IS NOT A REQUEST FOR PROPOSAL. The Air Force is seeking sources for a potential competitive 100% set aside for 8(a), HUBZone, Service Disabled Veteran Owned Small Business, or Small Business concerns. The purpose of this sources sought notice is to obtain information on qualified and experienced contractors interested in providing quotes for Mobile System including Transceiver. IF ADEQUATE RESPONSES ARE NOT RECEIVED FROM THE ABOVE-MENTIONED CONCERNS, THE ACQUISITION MAY BE SOLICITED ON AN UNRESTRICTED BASIS. DESCRIPTION OF REQUIREMENT 1. Mobile System including Transceiver (URC-200 (V2) transceiver or equal), 12V Car Mounting Kit (UDD-100A or equal), Spring Loaded Radio Antenna with Mounting Kit (UVU-110S or equal), Palm Mic (PTMP-150 or equal), Remote Speaker (PTSH-104 or equal), and Speaker Cable 4' (LSCA-103A or equal) Item 1 Part No. PMB-100 (V2) or equal 2. Remote Control Unit with 30/90 MHz, 400-420 MHz, Private Line, and 5KHz compatibility. Controls ONE radio. Item 2 Part No. UEC-120 or equal 3. Cable for URC-200 or equal to Remote Accessory Standard Length: 20ft. Cable for 10 Watt Systems, 20ft. length. Item 3 Part No. URE-U-A10-LLL-YY or equal Work to be performed will be within the North American Industry Classification System (NAICS) Code 334220 Other Communications Equipment Manufacturing and the small business standard of 750 Employees. If your firm has an interest in proposing on this future requirement as described above, please prepare and transmit a Capability Statement to SSgt Peter Burke Jr. and Jeremiah Snedker via mail addressed to 319 CONF/LGCA, 575 Tuskegee Airmen Blvd, Grand Forks AFB, ND, fax to (701) 747-4215, or email to peter.burke.2@us.af.mil and jeremiah.snedker@us.af.mil, not later than 4:00 PM CDT, 14 Sep 2012. If emailing your response, please note that due to increased firewall protections some emails may be blocked; therefore, follow-up via telephone at (701)747-3023 or (701)747-5299 (if an acknowledgement is not received back via email) is strongly recommended to ensure receipt of your submission by the Government. Request interested firms respond to this notice and include the following in their Capability Statement: (a) Firm's INFORMATION [name, address, phone number, CAGE Code]; (b) Firm's INTEREST to qualify [e.g., prime contractor, teaming partner, job venture, primary subcontractor]; (c) STATUS [e.g., 8(a) [including graduation date], HUBZone-certified small business, Service-Disabled Veteran Owned small business, small business, large business, etc.]; (d) CAPABILITY STATEMENT [Interested contractors must demonstrate a history of relevant installation and repair of mechanical equipment experience to include a summary of relevant and recent (within the last three fiscal years) performance history (identified by contract/project number, project title, dollar amount, point(s) of contact with telephone/fax numbers, and in what capacity (e.g., prime, subcontractor, etc.) performed)]; Interested contractors must provide the above information to the points of contacts listed herein. Information submitted shall be in sufficient detail as to allow for government review of firm's interest and capabilities. Responses shall be limited to three (3) pages. The government reserves the right to set this acquisition aside for Small Business, 8(a), HUBZone, Woman Owned, or Service Disabled Veteran Owned small business firms based on the responses it receives. Once the determination has been made to either set-aside the acquisition or solicit on an unrestricted basis, it will be posted on the Federal Business Opportunities website: https://www.fbo.gov/ This request for information (RFI) notice is issued for planning purposes only. This is not a Request for Proposal (RFP). Responses to this notice will assist the government in identifying potential sources and determining if a set-aside of the solicitation is appropriate. This notice does not obligate the government to award a contract, issue a solicitation, or pay for any proposal preparation costs.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/AMC/319CONS/FA4659-12-Q-0043/listing.html)
- Place of Performance
- Address: Grand Forks AFB, Grand Forks AFB, North Dakota, 58205, United States
- Zip Code: 58205
- Zip Code: 58205
- Record
- SN02882613-W 20120915/120914002552-9c54aae9254e9539af2e006cb64cb335 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |