SOLICITATION NOTICE
J -- Rotating Beacon and Camera Maintenance
- Notice Date
- 9/12/2012
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 811219
— Other Electronic and Precision Equipment Repair and Maintenance
- Contracting Office
- MICC Center - Fort Eustis (Joint Base Langley-Eustis), Building 2798, Fort Eustis, VA 23604-5538
- ZIP Code
- 23604-5538
- Solicitation Number
- 0010120453
- Response Due
- 9/14/2012
- Archive Date
- 11/13/2012
- Point of Contact
- Henry T.Wells, 757-878-3166
- E-Mail Address
-
MICC Center - Fort Eustis (Joint Base Langley-Eustis)
(henry.t.wells.civ@mail.mil)
- Small Business Set-Aside
- N/A
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. Interested vendors are responsible for monitoring this site for the release of any amendments or other pertinent information. This solicitation will be issued as a request for quotation (RFQ) in accordance with Federal Acquisition Regulation part 12 and 13 under the solicitation number 00101204053. This solicitation document incorporates provisions and clauses in effect through Federal Acquisition Circular (FAC) 2005-43. This acquisition is reserved for small businesses; however, the Government will accept proposals from all businesses. In the event of insufficient small business participation, award will be made on an unrestricted basis. The associated NAICS code for this acquisition is 811219 with a size standard of $19,000,000. All firms must be registered in the System for Award Management https://www.acquisition.gov and accept a Government purchase order to be considered for award. This RFQ requests a Maintenance and Repair Warranty for a Rotating Beacon and Camera System in accordance with the Performance Work Statement. PERFORMANCE WORK STATEMENT ROTATING BEACON & CAMERA SYSTEM MAINTENANCE RENEWAL NETWORK ENTERPRISE CENTER (NEC) EUSTIS 1. GENERAL: This is a non-personnel services contract to provide Maintenance for the NEC Eustis' Rotating Beacon and Camera System. The Government shall not exercise any supervision or control over the contract service providers performing the services herein. Such contract service providers shall be accountable solely to the Contractor who, in turn is responsible to the Government. 2. DESCRIPTION OF WORK: The contractor shall provide all personnel, equipment, supplies, facilities, transportation, tools, materials, supervision, and other items and non-personal services necessary to perform Rotating Beacon & Camera System Maintenance as defined in this Performance Work Statement except for those items specified as government furnished property and services. The contractor shall perform to the standards in this contract. 3. Background: The NEC Eustis is currently using the AMAG Security Management System to provide facility security. Original contract was awarded 05 August 2008 and supports the existing system components following the manufacturer's suggested maintenance plan. AMAG Symmetry Security Management System interfaces to various subsystems located within the facility. The following subsystems work independently but use the AMAG database management capability to provide secondary controls for: a.Access Control and Visitor Management b.Closed Circuit Television Video Management c.Aiphone Intercom Camera call up and door release d."Uncleared Person in room" Rotating Beacon System e.Sound masking Speech Privacy 4. Objectives: a.provide technical services to sustain operation of each subsystem b.one yearly systems Preventive Maintenance schedule maintenance c.If components are determined unrepairable during the course of this service plan following the manufacturer's warranty program the contractor will provide a separate cost proposal will be delivered to the government for procurement of required parts not covered under the warranty. 5. Scope: Without cost to the government. The contractor shall troubleshoot, repair or replace the following components: BUILDING 667 Schedule Customer Equipment ID AMAG HOST SYSTEM: GFE Server Windows ENT 2008, SQL 2008 1ea Exception: Items not covered under manufacturer's warranty GFE CLIENT PC Windows 7 Pro3ea AMAG Site Support Agreement-Registered under Integrated Systems Designs1ea AMAG Software- V7.01-ENT 56-HSE1ea AMAG Symmetry V7.01-HSE Pro 128 Client3ea AMAG Symmetry Video VID-CAM-08 License Software 08 cameras lic1 ea COMM EQUIPMENT: MN-NIC EXP Ethernet card2ea AT103XL Singlemode Media Converter1ea Meridian SR-Aiphone-5DST1ea Access Control Field Controllers Components: N2100 DBU 20k1ea N2100 4DCU2ea N2100 2DCR-New Node 22ea MN I/O daughter cards2ea BATTERY PS1212 7ah 12vdc2ea Cab-4 Cabinet-beige1ea Door group Materials and I/O points: S853 CAC reader Beige9ea LOCK MAGLOCK M62 12/24VDC2ea LOCK ELECTRIC STRIKE 12/24VDC4ea LOCK ELECTRIC STRIKE 21/24DV WITH LBM-REX HES50002ea LOCK ELECTRIC STRIKE 12/24VDC Rim 9600 LBM3ea Sentrol recessed 3/4" Door Position Sensor devices2ea Sentrol 2505 Surface Contact2ea EGRESS PIR/ PTE4ea System Power Controllers: 12VDC 10A 16 Ch output -Altronix Vertline1ea 24VDC 10A 16 Ch output -Altronix Vertline1ea Altronix OLS200 PS2ea Altronix Mom5 Interface1ea Altronix PD8CB2ea Cameras: AXIS 243Q Camera Encoders/Blade2ea Fixed Internal4ea Fixed External3ea Beacon Warning System: Edwards 53R Rotating beacons1ea Altronix RB Relay panel1ea Intercom System: Aiphone AX-8M audio only master Station2ea Aiphone AX-084C central exchange system1ea Aiphone AX-08DC Audio surface door station3ea Aiphone PS2420UL power supply unit2ea Aiphone AX8MV Audio.video Master station1ea Sound Masking- Speech Privacy System: AS-MG4 Generator1ea RDL-SM masking generator-cross zone1ea Peavy M875 Mixer1ea AS-EQ 32band equalizer1ea Roleen STR Transducer5ea Dynasound 3100 SM Unit1ea Atlas M1000 Masker5ea AT10 Volume Control1ea Director Gate Assembly: Liftmaster-Mega-A tower gate assembly 14' arm1ea BX-4 Loop detectors2ea TCG1 1 Channel receiver1ea TCI- 1button transmitter4ea Entry Gate Assembly: LiftMaster BG790 Control unit with 24' arm1ea ENDB1 AMAG Control Card1ea Guru Stanchion/housing1ea AT103XL Fiber Transponder1ea Meridian ST-AiphoneAX1-5DST1ea Aiphone AXW-AVT1ea Aiphone AXDVF1ea K24 Loop detectors2ea BUILDING 1387 Schedule Customer Equipment ID AMAG HOST SYSTEM See Host In Above Section COMM EQUIPMENT: MN-NIC EXP Ethernet card1ea Access Control Field Controllers Components: N2100 DBU 20k1ea N2100 4DCU1ea BATTERY PS1212 7ah 12vdc2ea Cab-4 Cabinet-beige1ea Door group Materials and I/O points: S853 CAC reader Beige1ea LOCK ELECTRIC STRIKE 12/24VDC2ea Sentrol recessed 3/4" Door Position Sensor devices1ea EGRESS PIR/ PTE1ea System Power Controllers 12VDC 4 output -Altronix Wall Mounted1ea Cameras: Hwell DVM Digital recorder1ea Fixed External5ea CCTV Monitor Station 421ea 5.1 The contractor is not responsible for the following items: 5.2 Lift rental is not included and will be billed separately if required. a. Server Computer, Desktop or laptop computers are not covered. b. Camera adjustments, including focus, field of view, cleaning of housing to remove dirt or moisture and removal of foreign objects from the view of the camera are specifically not part of the maintenance agreement. c. The contractor shall not be liable for any consequential damages and as per the manufactures warranty. d. The contractor has the right to either repair or replace the Equipment and has the right to use reconditioned or remanufactured parts in making repairs and replacements in accordance with manufacturer's warranty policies. If the contractor determines components are unrepairable during the course of this service plan, then a separate cost proposal will be delivered to the government for procurement of required parts not covered under the warranty. 6. PERIOD OF PERFORMANCE: The period of performance shall be for one (1) Base Year of 12 months. 7. GENERAL INFORMATION: 7.1 RECOGNIZED HOLIDAYS: The contractor is no obligated to perform these services on recognized holidays. New Year's DayLabor Day Martin Luther King Jr.'s BirthdayColumbus Day President's DayVeteran's Day Memorial DayThanksgiving Day Independence DayChristmas Day 7.2 HOURS OF OPERATION: The contractor is responsible for conducting business, between the hours of 0800-1600 hrs Monday thru Friday except Federal holidays or when the Government facility is closed due to local or national emergencies, administrative closings, or similar Government directed facility closings. For other than firm fixed price contracts, the contractor will not be reimbursed when the government facility is closed for the above reasons. The Contractor must at all times maintain an adequate workforce for the uninterrupted performance of all tasks defined within this PWS when the Government facility is not closed for the above reasons. 7.3 PLACE OF PERFORMANCE: The work to be performed under this contract will be performed at 667 Monroe Ave, Ft. Eustis, VA 23604. 7.4 SECURITY REQUIREMENTS: Contractor personnel performing work under this contract are not required to have a security clearance at time of the proposal submission or during the performance of this contract. Contractors at all times while performing duties under this PWS in the NEC Eustis' Network Operation Center will be escorted by an authorized employee. 7.5 KEY PERSONNEL: The follow personnel are considered key personnel by the government: Trained Technicians. The contractor shall provide a contract manager who shall be responsible for the performance of the work. The name of this person and an alternate who shall act for the contractor when the manager is absent shall be designated in writing to the contracting officer. The contract manager or alternate shall have full authority to act for the contractor on all contract matters relating to daily operation of this contract. The contract manager or alternate shall be available between 0800-1600 hrs, Monday thru Friday except Federal holidays or when the government facility is closed for administrative reasons. Qualifications for all key personnel are listed below: Key Personnel performing maintenance will have at least 6 years experience performing any services pertaining to the NEC Eustis' Rotating Beacon and Camera system. The following clauses and provisions are incorporated and will remain in full force inany resultant award: (full text of clauses and provisions may be accessed electronically at this website: http://farsite.hill.af.mil) FAR 52.204-99, System for Award Management Registration @https://www.acquisition.gov FAR 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders -- Commercial Items (May 2009) (Deviation) are incorporated by reference, however the following clauses apply: FAR 52.219-6, Notice of Total Small Business Set-Aside FAR 52.219-28, Post Award Small Business Program Representation FAR 52.222-19, Child Labor-Cooperation with Authorities and Remedies FAR 52.222-21, Prohibition of Segregated Facilities FAR 52.222-26, Equal Opportunity FAR 52.222-36, Affirmative Action for Workers with Disabilities FAR 52.223-18, Contractor Policy to Ban Text Messaging While Driving FAR 52.225-13, Restrictions on Certain Foreign Purchases FAR 52.232-33, Payment by Electronic Funds Transfer -- Central Contractor Registration DFARS 252.211-7003, Item Identification and Valuation DFARS 252.212-7001, Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisition of Commercial Items DFARS 252.225-7001 - Balance of Payments Program DFARS 252.232-7010, Levies on Contract Payments Offerors shall submit their quotations via email to henry.t.wells.civ@mail.mil. The due date for receipt of quotes is 5:00 pm. Eastern Standard Time (EST) on Friday, September 14, 2012. Include total pricing and your Cage, DUNS, and Tax ID number on quote.Basis for this award will be "Lowest Price, Technically Acceptable" LPTA). Contract will be Firm Fixed Price. Date of delivery shall be no later than 30 days after contract award, FOB: Destination for delivery is to 667 Monroe Avenue, Fort Eustis, VA 23604.Questions should be submitted to henry.t.wells.civ@mail.mil. This solicitation shall not be construed as a commitment of any kind. Contracting Office Address: MICC Center - Fort Eustis (Joint Base Langley-Eustis) Building 2746, Fort Eustis, VA 23604 Point of Contact: Henry T. Wells, 757-878-3166 ext 3293 henry.t.wells.civ@mail.mil
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/a6d7070835b4f47a201e33745af4ea5e)
- Place of Performance
- Address: MICC Center - Fort Eustis (Joint Base Langley-Eustis) Building 2798, Fort Eustis VA
- Zip Code: 23604-5538
- Zip Code: 23604-5538
- Record
- SN02879591-W 20120914/120913001016-a6d7070835b4f47a201e33745af4ea5e (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |