PRESOL | P | VERTICAL TURRET LATHE REMOVAL

FBO DAILY ISSUE OF AUGUST 23, 2012 FBO #3925
SOLICITATION NOTICE

P -- VERTICAL TURRET LATHE REMOVAL

Notice Date: 8/21/2012
Notice Type: Combined Synopsis/Solicitation
NAICS: 238290 — Other Building Equipment Contractors
Contracting Office: N00244 NAVSUP Fleet Logistics Center San Diego Naval Base 937 North Harbor Drive San Diego, CA
ZIP Code: 00000
Solicitation Number: N0024412T0321
Response Due: 8/28/2012
Archive Date: 9/12/2012
Point of Contact: KIMBERLY RIEDER 619-556-5239
Small Business Set-Aside: Total Small Business
Description: This is a combined synopsis/solicitation for commercial items prepared in accordance with FAR Part 13 Simplified Acquisition Procedures and 12.6 Streamlined Procedures for Evaluation and Solicitation for Commercial Items. This announcement constitutes the only solicitation; a Request for Quotation (RFQ) is being requested and a written solicitation will not be issued. The Solicitation number is N00244-12-T-0321. The RFQ and incorporated provisions and clauses are those in effect through FAR FAC 2005-60 and DFARS-DCN 20100820. This solicitation is issued as unrestricted NAICS Code 238290 Other Building Equipment Contractors is applicable and business size is $14.0 million. ************************************************************************** Line Item 0001: On-site Vertical Turret Lathe removal (96 inch VTL) in accordance with the statement of work. Quote shall include a complete cost breakdown detailing the number of labor hours, the labor rate, and material cost required to complete the requirement as detailed in the statement of work. Services shall be performed at Naval Base San Diego, 92136. Inspection and acceptance will be made at Destination by the Government. Post Award Contract Administration will be performed by NAVSUP Fleet Logistics Center San Diego, Code 240. Payment: The US Navy anticipates using Wide Area Workflow (WAWF) to pay invoices IAW DFAR 252.232-7003 and DFARS 252.232-7006. Requests for technical and or contractual clarification are to be submitted to the Purchasing Agent via email: kimberly.rieder@navy.mil. TECHNICAL QUESTIONS ARE TO BE SUBMITTED VIA EMAIL received no later than COB 5:00PM (PST) on August 24, 2012. THE FOLLOWING PROVISIONS AND CLAUSES ARE APPLICABLE AND ARE HEREBY INCORPORATED INTO THE SOLICITATION BY REFERENCE AND BY FULL TEXT. THE FULL TEXT OF THE CLAUSES/PROVISIONS FROM THE FAR AND DFARS CAN BE ACCESSED VIA THE INTERNET USING THE FOLLOWING WEB-SITE ADDRESS: www.arnet.gov or http://farsite.hill.af.mil It is the responsibility of the interested contractors to obtain copies of the necessary provisions and or clauses that are required as a part of this solicitation. Required clauses/provisions that are not submitted may render a quote not to be accepted by the Government. The following Clauses are applicable: FAR 52.212-1, Instructions to Offerors - Commercial Items; NOTE: This provision must be reviewed completely. It contains the guidelines for submission of your quotation. FAR 52.212-2 Evaluation of Commercial Items; (a) The Government will award a contract resulting from this solicitation to the responsible Quoting Contractor 冱 whose quote conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers. (i) TECHNICAL CAPABILITY OF PROPOSED ITEM TO MEET THE REQUIREMENT (ii) PAST PERFORMANCE (iii) PRICE Quotes will be evaluated first under Factor (i) above, which represents MINIMUM acceptable criteria. Under this factor, quotes will be determined to be either technically acceptable or unacceptable. Failure to meet the minimum criteria for this factor will render the quote to be technically unacceptable and to not be considered for award. See paragraph (b) below. Only those quotes which meet the minimum requirements established by Factor (i) will be further evaluated under Factors (ii) and (iii). In the second step of evaluating those quotes determined under Factor (i) to be technically acceptable, Factor (ii), PAST PERFORMANCE, is significantly less important than Factor (iii), PRICE. At the discretion of the Contracting Officer, the Government intends to evaluate proposals and award a contract without discussions with quoting contractors. Each initial offer should, therefore contain the quoting contractor 冱 best terms from both a price and technical standpoint. (b) TECHNICAL CAPABILITY OF PROPOSED ITEM TO MEET THE REQUIREMENT, Factor (i), IAW FAR 52.212-1(b)(4) 典he contractor shall provide technical information sufficient in nature to detail their ability and approach to perform the required services under this request for solicitation. Quoting Contractor 冱 technical information will be used to determine whether the items or services proposed meet the specifications included in this solicitation. Items or services quoted, as provided in Quoting Contractor 冱 technical information, will be evaluated and determined to be either technically acceptable or technically unacceptable. Quotes which are determined to be technically unacceptable may not be considered further for award. (c) Quoting Contractor 冱 PAST PERFORMANCE information submitted as required, will be used to make a determination of whether the quoting contractor has a satisfactory record of past performance. Quoting Contractor 冱 should, therefore, provide performance history and references to demonstrate satisfactory performance for up to three prior similar contracts performed within the past three years. PAST PERFORMANCE information should be provided on the form provided as an attachment to this solicitation. Information utilized will be obtained from these references as well as any other sources who may have relevant information. Quoting Contractor 冱 which lack relevant past performance history will receive a neutral rating for this factor. Any quote which has no relevant past performance history, while rated neutral, may not represent the most advantageous proposal to the Government and thus, may be an unsuccessful proposal when compared to the proposals of other quotes. The Contracting Officer will evaluate Quoting Contractor 冱 PAST PERFORMANCE as follows: SATISFACTORY: Very little risk anticipated with delivery of quality product, on time, or of degradation of performance, or lack of customer satisfaction based upon the quoting contractor 冱 past performance. MARGINAL: Significant potential risk anticipated with delivery of quality product, on time, and of degradation of performance based upon the quoting contractor 冱 past performance. NEUTRAL: No relevant past performance available for evaluation. Quoting contractor has asserted that it has no relevant directly related or similar past performance experience. Proposal receives no merit or demerit for this factor. (d) Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s). (e) A written notice of award or acceptance of a quote, mailed or otherwise furnished to the successful quoting contractor within the time for acceptance specified in the quote, shall result in a binding contract without further action by either party. FAR 52.212-3, Offeror Representation and Certifications-Commercial Items-ALT I-OCT 1998; Incorporated by reference; NOTE: This provision is considered a 彷ill-in. � All applicable fields must be completed. Submit this provision with your quotation. FAR 52.212-4 Contract Terms and Conditions Commercial Items. FAR 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items. FAR 52.222-3 Convict Labor. FAR 52.222-19 Child Labor 任ooperation with Authorities and Remedies. FAR 52.222-21 Prohibition of Segregated Facilities. FAR 52.222-26 Equal Opportunity. FAR 52.222-36 Affirmative Action for Workers with Disabilities. FAR 52.222-41 Service Contract Act of 1965 FAR 52.222-42 Statement of Equivalent Rates for Federal Hires FAR 52.222-50 Combating Trafficking in Persons. FAR 52.232-33 Payment by Electronic Funds Transfer 任entral Contractor Registration. FAR 52.233-3 Protest after Award. FAR 52.225-13 Restrictions on Certain Foreign Purchases. FAR 52.223-18 Contractor Policy to Ban Text Messaging While Driving (Sep 2010) FAR 52.233-4 Applicable Law for Breach of Contract claim. FAR 52.237-2 Protection of Government Buildings, Equipment, and Vegetation. FAR 52.247-34 F.o.b. Destination. FAR 52.252-1 Solicitation Provisions Incorporated by Reference. FAR 52.252-2 Clauses Incorporated by Reference. DFARS 252.212-7001, Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisitions of Commercial Items including: DFARS 252.203-7000 Requirements Relating to Compensation of Former DOD Officials, DFARS 252.225-7001 Buy American Act and Balance of Payments Program, DFARS 252.247-7023 Alt III Transportation of Supplies by Sea. DFARS 252.225-7000 Buy American Act � Balance of Payments Program Certificate. DFARS 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports. DFARS 252.232-7010 Levies on Contract Payments. DFARS 252.232-7006 Wide Area Work Flow Payment Instructions; REVIEW OF AGENCY PROTESTS The contracting activity, Fleet Logistics Center San Diego (FLCSD) will process agency protests in accordance with the requirements set forth in FAR 33.103(d). Pursuant to FAR 33.103(d)(4), agency protests may be filed directly with the appropriate reviewing authority; or, a protester may appeal a decision rendered by a contracting officer to the reviewing authority. The reviewing authority for FLCSD is the Director, Regional Contracts Department, Fleet Logistics Center San Diego at 937 North Harbor Drive, San Diego, CA 92132-0060. Agency procurement protests should clearly identify the initial adjudicating official, i.e., the "contracting officer" or "reviewing official". Quoting contractor 冱 should note this review of the Contracting Officer's decision will not extend GAO's timeliness requirements. Therefore, any subsequent protest to GAO must be filed within 10 days of knowledge of initial adverse agency action. UNIT PRICES (OCT 2001) Contractor unit prices, when incorporated into a Government contract, will be released under the Freedom of Information Act (FOIA) without further notice to the contractor submitter. If the Contractor takes issue with the release, it should submit its proposal data with the appropriate legends and explain in detail why such data cannot be released as a public record under the Freedom of Information Act. NON-NAVY OWNED CRANES The following is a list of minimum requirements that contractors shall comply with for all contracts that may result in the use of a crane for the accomplishment of work. (a)The contractor shall notify the contracting officer, in advance, of the intent of bringing a non-Navy owned crane onto a Navy shore installation. All entries shall be through a prearranged entry point. (b)The contractor shall comply with the applicable American Society of Mechanical Engineers (ASME) standards (e.g., B30.5 for mobile cranes, B30.22 for articulating boom cranes, B30.3 for construction tower cranes, and B30.8 for floating cranes). For barge mounted mobile cranes, a load indicating device, a wind indicating device, and a marine type list indicator readable in one-half degree increments are required. In addition, the contractor shall comply with specific naval crane safety and operation regulations/standards specifically required by the Navy shore installation and state or local Government. (c)The contractor shall certify that the crane and rigging gear meets applicable Occupational Safety and Health Administration (OSHA) regulations by providing a Certificate of Compliance. The Certificate, figure P-1, appendix P-1 of Naval Facilities Engineering Command (NAVFAC) P-307 廴anagement of Weight Handling Equipment �, can be downloaded from the NAVFAC Naval Crane Center website, http://ncc.navfac.navy.mil/crane/307jun03.pdf. The contractor must cite which OSHA regulations are applicable, e.g., cranes used in cargo transfer shall comply with 29 CFR 1917; cranes used in construction, demolition, or maintenance shall comply with 29 CFR 1926; cranes used in shipbuilding, ship repair, or shipbreaking shall comply with 29 CFR 1915. For cranes at Naval activities in foreign countries, the contractor shall certify that the crane and rigging gear conform to the appropriate host country safety standards. The contractor shall also certify that all of its crane operators working in the naval activity have been trained not to bypass safety devices (e.g., anti-two block devices) during lifting operations. The Certification of Compliance form shall be posted on the crane. (d) For mobile cranes with original equipment manufacturer (OEM) rated capacities of 50,000 pounds or greater, the crane operators shall be designated as qualified by a source that qualifies crane operators (i.e., union, a Government agency, or an organization that tests and qualifies crane operators). Proof of current qualification shall be provided. (e)The contractor shall certify that the crane operator is qualified and trained for the operation of the crane to be used. Certification appendix P-1, figure P-1, of NAVFAC P-307, see paragraph (c) above. (f)The contractor shall provide a critical lift plan for each of the following lifts: lifts over 75 percent of the capacity of the crane or hoist (lifts over 50 percent of the capacity of a barge mounted mobile crane 冱 hoists) at any radius of lift; lifts involving more than one crane or hoist; lifts of personnel; and lifts involving non-routine rigging or operation, sensitive equipment, or unusual safety risks. The plan shall include the following as applicable: (1)The size and weight of the load to be lifted, including crane and rigging components that add to the weight. The OEM's maximum load capacities for the entire range of the lift shall also be provided. (2)The lift geometry, including the crane position, boom length and angle, height of lift, and radius for the entire range of the lift. This applies to both single and tandem crane lifts. (3)A rigging plan, showing the lift points, rigging gear, and rigging procedures. (4)The environmental conditions under which lift operations are to be stopped. (5)For lifts of personnel, the plan shall demonstrate compliance with the requirements of 29 CFR 1926.550(g) (6)For barge mounted mobile cranes, barge stability calculations identifying barge list and trim based on anticipated loading; and load charts based on calculated lists and trim. The amount of list and trim shall be within the crane manufacturer 冱 requirements. (g)Contractors shall notify the contracting officer as soon as practicable, but no later than four hours after any weight handling equipment (WHE) accident (see definition in NAVFAC P-307, section 12). The contractor shall secure the accident site and protect evidence until released by the contracting officer. The contractor shall conduct an accident investigation to establish the root cause(s) of any WHE accident. Crane operations shall not proceed until the cause is determined and corrective actions have been implemented to the satisfaction of the contracting officer. (h) The contractor shall provide the contracting officer within 30 days of any accident a Weight Handling Equipment Accident Report using the form provided in NAVFAC P-307, section 12, consisting of a summary of circumstances, an explanation of causes(s), photographs (if available), and corrective actions taken. These notifications and reporting requirements are in addition to those promulgated by OPNAVINST 5100.23 and related claimant instructions. (End of clause) Offeror 冱 Past Performance Data: 1. This performance data is to be used to evaluate your Company 冱 past performance contract cost/price, technical and delivery objectives. 2. List performance data on your three most recently completed Federal Government contracts (not to exceed three years since completion) for like or similar items required by this solicitation. If you do not have three Federal Government contracts, then list commercial, state or local contracts, in that order, to complete this report. 3. Contract Number for reference: a. Awarded by: b. Address: c. City/State/Zip: d. Contact name: e. telephone/fax: f. Contract type/contract number: g. Item or service description: h. Quantity: i. Hourly rate/Total cost: j. ___ Yes ____ No - Was consideration or a monetary withhold assessed against this contract for non-conforming supplies/services? k. ___ Yes ____ No - Was, or is, any part of this contract terminated for default or involved in litigation? l. ___ Yes ____ No - Was any warranty work completed on delivered items? m. ___ Yes ____ No - Were all items delivered within the original contract schedule? n. ___ Yes ____ No - Has your Company received any quality awards in the past three year? o. For all answers with an asterisk, please provide an explanation. Describe any corrective actions initiated to solve any of the above-described problems/deficiencies on this contract. Discuss the success of the corrective actions taken. Wage Determination: WD 05-2057 (Rev.-13) was first posted on www.wdol.gov on 06/19/2012 ************************************************************************************ REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION By direction of the Secretary of Labor | WAGE AND HOUR DIVISION | WASHINGTON D.C. 20210 | | | | Wage Determination No.: 2005-2057 Diane C. Koplewski Division of | Revision No.: 13 Director Wage Determinations| Date Of Revision: 06/13/2012 _______________________________________|____________________________________________ State: California Area: California Counties of Imperial, San Diego http://www.wdol.gov/sca.aspx End of Clauses/Provisions. Quotation information may be submitted electronically via e-mail. Submit responses to: kimberly.rieder@navy.mil. Reference solicitation number: N00244-12-T-0321on all documents and requests for information. Quotes must be received no later than COB 1700 (PST) on August 28, 2012. STATEMENT OF WORK 1.SCOPE: TITLE: SWRMC BLDG 61 / VERTICAL TURRET LATHE (96 inch-VTL) REMOVAL SERVICE REQUEST 1.1IDENTIFICATION: (UIC) N55236 (CODE 1151) SWRMC 32ND STREET NAVAL BASE SAN DIEGO, CA. 92136 1.2LOCATION: SWRMC BLDG 61, CODE 1151, Point of Contact: Michael Renner, (619)556-6743 / (540)931-4945 2.JOB DESCRIPTION: 2.1Vendor shall furnish labor, material, necessary equipment and supervision service on (KING 96 inch-VTL) Vertical Turret Lathe machine (Model Number: 100, Serial Number: 3241, Manufacturer: American Steel Foundries) in SWRMC bldg 61 as follows: a) Furnish plates to adjacent parking lot for lay down area. b) Remove 96 inch VTL (Vertical Turret Lathe) machine from SWRMC bldg 61, Machine Shop area. (Flame/Torch type cutting will be necessary to produce 20,000 lbs. sections). c) Place in lay down area in adjacent parking lot. d) Disassemble as needed NOT TO EXCEED 20,000 lbs for each section (Forklift maximum load capacity is 20,000 lbs). e) Wipe residual fluids from machine parts. f) Place each 20,000 lbs. section in lay down area. g) Stage skidded sections in lay down area. h) Remove plates from lay down area upon completion of loading sections to vehicle transport provided by the government. 3.NOTES: 3.1The government / SWRMC are not liable for any payments of delay and / or additional work not duly negotiated and approved by the contracting officer/purchasing agent. 3.2Proposal shall be based on regular weekday work hours only (6:30 a.m. to 4:00 p.m.) 3.3The government / SWRMC personnel shall be responsible for all utility disconnection. 3.4The government / SWRMC personnel shall be responsible for hazardous disposal of rags, absorbent materials and any oil amount over 5(five) gallons recovered by the contracted vendor. 3.5Lay down area provided by SWRMC shall be adjacent to west bay door of bldg 61. 3.6Vendor shall place plates in lay down area to protect the surface for damage of any kind. 3.7Vendor shall provide wood skids as needed for disassembled machine sections. 3.8Machine sections shall be secured to skids adequately for SWRMC to load on government provided trucks/carrier. 3.9The government / SWRMC shall be responsible for loading and transportation of disassembled machine sections. 3.10The government / SWRMC shall provide 廩ot Work � permits as necessary for contracted vendor to perform such work. 3.11Vendor and SWRMC shall provide fire watch during the duration of hot work. 3.12Service request payment shall be submitted through Wide Area Workflow (WAWF). 3.13Vendor shall provide commercial liability insurance upon request. 3.14Rapid Gate access is required for base access and responsibility of the awarded vendor. 4.DELIVERY LOCATION: 4.1SWRMC San Diego 3755 Brinser Street / Bldg 61 San Diego, Ca. 92136 P.O.C. Michael Renner: (540)931-4945 / (619)556-6743. 5.PERIOD OF PERFORMANCE / REQUIRED DELIVERY DATES: 5.1 Required Delivery Dates and Period of Performance: 30 days ARO and POP by the following two (2) weeks or 15 days.
Web Link: FBO.gov Permalink
(https://www.fbo.gov/spg/DON/NAVSUP/200/N0024412T0321/listing.html)
Place of Performance: Address: SWRMC San Diego; Zip Code: 3755 Brinser Street/ Bldg 61, San Diego, CA
Record: SN02849003-W 20120823/120822000832-4a2c6e998c22297e245a97bbb643b084 (fbodaily.com)
Source: FedBizOpps Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's FBO Daily Index Page |

Loren Data's SAM Daily™

P -- VERTICAL TURRET LATHE REMOVAL