MODIFICATION
65 -- Surgical Screws; Plates; Instrument Set
- Notice Date
- 8/21/2012
- Notice Type
- Modification/Amendment
- Contracting Office
- 325 Folly Road, 3rd Floor, Charleston SC 29412, SC 29412
- ZIP Code
- 29412
- Solicitation Number
- VA247-12-Q-0973
- Response Due
- 8/22/2012
- Archive Date
- 2/18/2013
- Point of Contact
- Name: Dino LaRocca, Title: Contract Specialist, Phone: 8437896528, Fax:
- E-Mail Address
-
dino.larocca@va.gov;
- Small Business Set-Aside
- Service-Disabled Veteran-Owned Small Business
- Description
- AMENDMENT NOTICE:This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is VA247-12-Q-0973 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-60. The associated North American Industrial Classification System (NAICS) code for this procurement is 339112 with a small business size standard of 500.00 employees.This requirement is a [ Service-Disabled Veteran Owned ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2012-08-22 16:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Hanahan, SC 29410 The VHA NCO 07 - 534 - Charleston, SC requires the following items, Exact Match Only, to the following: LI 001, 292.656: GUIDE WIRE, 2.0MM NON-THREADED-SPADE POINT ON ONE END 230MM, 10, EA; LI 002, 310.19: 2.0mm DRILL BIT/QUICK CONNECT/100MM, 2, EA; LI 003, 310.31: 3.2MM DRILL BIT/QUICK CONNECT/145MM, 2, EA; LI 004, 310.44: 4.5MM DRILL BIT/QUICK CONNECT/145MM, 2, EA; LI 005, 311.46: TAP FOR 4.5MM CORTEX/SHAFT SCRES 130MM/57MM TAP DEPTH, 2, EA; LI 006, 311.66: TAP FOR 6.5MM CANCELLOUS BONE SCREWS 197MM/150MM, 2, EA; LI 007, 310.99: COUNTERSINK FOR 4.5MM CORTEX SCREWS, 1, EA; LI 008, 314.15: LARGE HEXAGONAL SCREWDRIVER SHAFT, 1, EA; LI 009, 312.48:4.5MM/3.2MM INSERT DRILL SLEEVE, 1, EA; LI 010, 323.46: 4.5MM UNIVERSAL DRILL GUIDE, 1, EA; LI 011, 312.46: 4.5MM/3.2MM DOUBLE DRILL SLEEVE, 1, EA; LI 012, 312.67: 6.5MM/3.2MM DOUBLE DRILL SLEEVE, 1, EA; LI 013, 319.10: DEPTH GAUGE FOR LARGE SCREWS, 1, EA; LI 014, 311.44: T HANDLE WITH QUICK COUPLING, 1, EA; LI 015, 314.27: LARGE HEXAGONAL SCREWDRIVER, 1, EA; LI 016, 314.11: HOLDING SLEEVE, 1, EA; LI 017, 319.39: SHARP HOOK, 1, EA; LI 018, 321.12: ARTICULATED TENSION DEVICE WITH GAUGE-SPAN 20MM, 1, EA; LI 019, 321.15: SOCKET WRENCH-11MM WIDTH ACROSS FLATS, 1, EA; LI 020, 690.363: LARGE FRAGMENT LCP INSTRUMENT SET GRAPHIC CASE, 1, EA; LI 021, 312.445: 3.2MM THREADED DRILL GUIDE, 2, EA; LI 022, 312.449: 4.3MM THREADED DRILL GUIDE, 4, EA; LI 023, 310.431: 4.3MM DRILL BIT/QUICK CONNECT/180MM, 2, EA; LI 024, 323.021: DIRECT MEASURING DEVICE FOR 5.0MM LOCKING SCREWS, 1, EA; LI 025, 323.046: 2.0MM WIRE SLEEVE, 2, EA; LI 026, 311.449: PUSH-PULL REDUCTION DEVICE FOR 4.5MM LCP PLATES, 2, EA; LI 027, 314.118: STARDRIVE SCREWDRIVER T25 SELF-RETAINING 245MM, 1, EA; LI 028, 314.119: STARDRIVE SCREWDRIVER SHARFT T25/SELF RETAINING 165MM, 1, EA; LI 029, 324.075: THREADED PLATE HOLDER, 1, EA; LI 030, 397.706: HANDLE FOR AO REAMING COUPLER CONNECTION, 1, EA; LI 031, 224.541: 4.5MM NARROW LCP PLATE 4 HOLES/80MM, 1, EA; LI 032, 224.551: 4.5MM NARROW LCP PLATE 5 HOLES/98MM, 1, EA; LI 033, 224.561: 4.5MM NARROW LCP PLATE 6 HOLES/116MM, 1, EA; LI 034, 224.571: 4.5MM NARROW LCP PLATE 7 HOLES/134MM, 1, EA; LI 035, 224.581: 4.5MM NARROW LCP PLATE 8 HOLES/152MM, 1, EA; LI 036, 224.591: 4.5MM NARROW LCP PLATE 9 HOLES/170MM, 1, EA; LI 037, 224.601: 4.5MM NARROW LCP PLATE 10 HOLES/188MM, 1, EA; LI 038, 224.611: 4.5MM NARROW LCP PLATE 11 HOLES/206MM, 1, EA; LI 039, 224.621: 4.5MM NARROW LCP PLATE 12 HOLES/224MM, 1, EA; LI 040, 224.641: 4.5MM NARROW LCP PLATE 14 HOLES/260MM, 1, EA; LI 041, 224.661: 4.5MM NARROW LCP PLATE 16 HOLES/296MM, 1, EA; LI 042, 226.561: 4.5MM BROAD LCP PLATE 6 HOLES/116MM, 1, EA; LI 043, 226.571: 4.5MM BROAD LCP PLATE 7 HOLES/134MM, 1, EA; LI 044, 226.581: 4.5MM BROAD LCP PLATE 8 HOLES/152MM, 1, EA; LI 045, 226.591: 4.5MM BROAD LCP PLATE 9 HOLES/170MM, 1, EA; LI 046, 226.601: 4.5MM BROAD LCP PLATE 10 HOLES/188MM, 1, EA; LI 047, 226.611: 4.5MM BROAD LCP PLATE 11 HOLES/206MM, 1, EA; LI 048, 226.621: 4.5MM BROAD LCP PLATE 12 HOLES/224MM, 1, EA; LI 049, 226.641: 4.5MM BROAD LCP PLATE 14 HOLES/260MM, 1, EA; LI 050, 226.661: 4.5MM BROAD LCP PLATE 16 HOLES/296MM, 1, EA; LI 051, 240.141: 4.5MM LCP T P[LATE 4 HOLES 83MM, 1, EA; LI 052, 240.161: 4.5MM LCP T PLATE 6 HOLES 115MM, 1, EA; LI 053, 240.181: 4.5MM LCP T-PLATE 8 HOLES 147MM, 1, EA; LI 054, 690.360: LARGE FRAGMENT LCP IMPLANT SET GRAPHIC CASE, 1, EA; LI 055, 329.92: BENDING TEMPLATE 12 HOLES FOR 4.5MM LC-DCP & DCP PLATES, 1, EA; LI 056, 329.97: ENDING TEMPLATE 7 HOLES FOR 4.5MM LC-DCP & DCP PLATESE, 1, EA; LI 057, 329.99: BENDING TEMPLATE 9 HOLES FOR 4.5MM LC=DCP & DCP PLATES, 1, EA; LI 058, 239.984: 4.5MM LCP MEDIAL PROXIMAL TIBIA PLATE 4HOLES/RIGHT 106MM, 1, EA; LI 059, 239.985: 4.5mm LCP MEDICAL PROXIMAL TIBIA PLATE 4 HOLES/LEFT 106MM, 1, EA; LI 060, 29.986: 4.5MM LCP MEDIAL PROXIMAL TIBIA PLATE 6 HOLES/RIGHT 142MM, 1, EA; LI 061, 239.987: 4.5MM LCP MEDIAL PROXIMAL TIBIA PLATE 6 HOLES/LEFT 142MM, 1, EA; LI 062, 214.814: 4.5MM CORTEX SCREW SELF-TAPPING 14MM, 4, EA; LI 063, 214.816: 4.5MM CORTEX SCREW SELF TAPPING 16MM, 4, EA; LI 064, 214.818: 4.5MM CORTEX SCREW SELF TAPPING 18MM, 4, EA; LI 065, 214.820: 4.5MM CORTEX SCREW SELF-TAPPING 20MM, 6, EA; LI 066, 214.822: 4.5MM CORTEX SCREW SELF-TAPPING 22MM, 6, EA; LI 067, 214.824: 4.5MM CORTEX SCREW SELF TAPPING 24MM, 6, EA; LI 068, 214.826: 4.5MM CORTEX SCREW SELF TAPPING 26MM, 11, EA; LI 069, 214.828: 4.5MM CORTEX SCREW SELF TAPPING 28MM, 12, EA; LI 070, 214.830: 4.5MM CORTEX SCREW SELF TAPPING 30MM, 10, EA; LI 071, 214.832: 4.5MM CORTEX SCREW SELF TAPPING 32MM, 9, EA; LI 072, 214.834: 4.5MM CORTEX SCREW SELF TAPPING 34MM, 5, EA; LI 073, 214.836: 4.5MM CORTEX SCREW SELF TAPPING 36MM, 10, EA; LI 074, 214.838: 4.5MM CORTEX SCREW SELF TAPPING 38MM, 7, EA; LI 075, 214.840: 4.5MM CORTEX SCREW SELF TAPPING 40MM, 10, EA; LI 076, 214.842: 4.5MM CORTEX SCREW SELF TAPPING 42MM, 7, EA; LI 077, 214.846: 4.5MM CORTEX SCREW SELF TAPPING 46MM, 2, EA; LI 078, 214.848: 4.5MM CORTEX SCREW SELF TAPPING 48MM, 2, EA; LI 079, 214.850: 4.5MM CORTEX SCREW SELF TAPPING 50MM, 1, EA; LI 080, 214.856: 4.5MM CORTEX SCREW SELF TAPPING 56MM, 2, EA; LI 081, 214.858: 4.5MM CORTEX SCREW SELF TAPPING 58MM, 3, EA; LI 082, 214.860: 4.5MM CORTEX SCREW SELF TAPPING 60MM, 2, EA; LI 083, 214.862: 4.5MM CORTEX SCREW SELF TAPPING 62MM, 3, EA; LI 084, 214.864: 4.5MM CORTEX SCREW SELF TAPPING 64MM, 3, EA; LI 085, 214.866: 4.5MM CORTEX SCREW SELF TAPPING 66MM, 3, EA; LI 086, 214.868: 4.5MM CORTEX SCREW SELF TAPPING 68MM, 3, EA; LI 087, 214.870: 4.5MM CORTEX SCREW SELF TAPPING 70MM, 3, EA; LI 088, 216.065:6.5MM CANCELLOUS BONE SCREW 16MM THREADED/65MM, 1, EA; LI 089, 216.080: 6.5MM CANCELLOUS BONE SCREW 16MM THREADED/80MM, 1, EA; LI 090, 216.085: 6.5MM CANCELLOUS BONE SCREW 16MM THREADED/85MM, 2, EA; LI 091, 216.095: 6.5MM CANCELLOUS BONE SCREW 16MM THREADED/95MM, 1, EA; LI 092, 216.110:6.5MM CANCELLOUS BONE SCREW 16MM THREADED/110MM, 3, EA; LI 093, 217.070: 6.5MM CANCELLOUS BONE SCREW 32MM THREADED/70MM, 3, EA; LI 094, 217.075: 6.5MM CANCELLOUS BONE SCREW 32MM THREADED/75MM, 3, EA; LI 095, 217.085: 6.5MM CANCELLOUS BONE SCREW 32MM THREADED/85MM, 3, EA; LI 096, 217.090: 6.5MM CANCELLOUS BONE SCREW 32MM THREADED/90MM, 3, EA; LI 097, 217.095: 6.5MM CANCELLOUS BONE SCREW 32MM THREADED/95MM, 3, EA; LI 098, 217.100: 6.5MM CANCELLOUS BONE SCREW 32MM THREADED/100MM, 3, EA; LI 099, 217.110: 6.5MM CANCELLOUS BONE SCREW 32MM THREADED/110MM, 1, EA; LI 100, 218.040: 6.5MM CANCELLOUS BONE SCREW FULLY THREADED/40MM, 1, EA; LI 101, 218.060: 6.5MM CANCELLOUS BONE SCREW FULLY THREADED/60MM, 2, EA; LI 102, 219.99: WASHER 13.0MM, 6, EA; LI 103, 212.201: 5.0MM 14MM LOCKING SCREW SELF TAPPING WITH T25 STARDRIVE RECESS, 4, EA; LI 104, 212.202: 5.0MM 16MM LOCKING SCREW SELF TAPPING WITH T25 STARDRIVE RECESS, 4, EA; LI 105, 212.203: 5.0MM 18MM LOCKING SCREW SELF TAPPING WITH T25 STARDRIVE RECESS, 4, EA; LI 106, 212.204: 5.0MM 20MM LOCKING SCREW SELF TAPPING WITH T25 STARDRIVE RECESS, 4, EA; LI 107, 212.205: 5.0MM 22MM LOCKING SCREW SELF TAPPING WITH T25 STARDRIVE RECESS, 4, EA; LI 108, 212.206: 5.0MM 24MM LOCKING SCREW SELF TAPPING WITH T25 STARDRIVE RECESS, 4, EA; LI 109, 212.207: 5.0MM 26MM LOCKING SCREW SELF TAPPING WITH T25 STARDRIVE RECESS, 4, EA; LI 110, 212.208: 5.0MM 28MM LOCKING SCREW SELF TAPPING WITH T25 STARDRIVE RECESS, 4, EA; LI 111, 212.209: 5.0MM 30MM LOCKING SCREW SELF TAPPING WITH T25 STARDRIVE RECESS, 4, EA; LI 112, 212.210: 5.0MM 32MM LOCKING SCREW SELF TAPPING WITH T25 STARDRIVE RECESS, 4, EA; LI 113, 212.211: 5.0MM 34MM LOCKING SCREW SELF TAPPING WITH T25 STARDRIVE RECESS, 4, EA; LI 114, 212.212: 5.0MM 36MM LOCKING SCREW SELF TAPPING WITH T25 STARDRIVE RECESS, 4, EA; LI 115, 212.213: 5.0MM 38MM LOCKING SCREW SELF TAPPING WITH T25 STARDRIVE RECESS, 4, EA; LI 116, 212.214: 5.0MM 40MM LOCKING SCREW SELF TAPPING WITH T25 STARDRIVE RECESS, 4, EA; LI 117, 212.215: 5.0MM 42MM LOCKING SCREW SELF TAPPING WITH T25 STARDRIVE RECESS, 4, EA; LI 118, 212.216: 5.0MM 44MM LOCKING SCREW SELF TAPPING WITH T25 STARDRIVE RECESS, 3, EA; LI 119, 212.217: 5.0MM 46MM LOCKING SCREW SELF TAPPING WITH T25 STARDRIVE RECESS, 3, EA; LI 120, 212.218: 5.0MM 48MM LOCKING SCREW SELF TAPPING WITH T25 STARDRIVE RECESS, 3, EA; LI 121, 212.219: 5.0MM 50MM LOCKING SCREW SELF TAPPING WITH T25 STARDRIVE RECESS, 3, EA; LI 122, 212.220: 5.0MM 55MM LOCKING SCREW SELF TAPPING WITH T25 STARDRIVE RECESS, 3, EA; LI 123, 212.221: 5.0MM 60MM LOCKING SCREW SELF TAPPING WITH T25 STARDRIVE RECESS, 3, EA; LI 124, 212.222: 5.0MM 65MM LOCKING SCREW SELF TAPPING WITH T25 STARDRIVE RECESS, 3, EA; LI 125, 212.223: 5.0MM 70MM LOCKING SCREW SELF TAPPING WITH T25 STARDRIVE RECESS, 3, EA; LI 126, 212.224: 5.0MM 75MM LOCKING SCREW SELF TAPPING WITH T25 STARDRIVE RECESS, 3, EA; LI 127, 212.225: 5.0MM 80MM LOCKING SCREW SELF TAPPING WITH T25 STARDRIVE RECESS, 3, EA; LI 128, 212.226: 5.0MM 85MM LOCKING SCREW SELF TAPPING WITH T25 STARDRIVE RECESS, 3, EA; LI 129, 212.227: 5.0MM 90MM LOCKING SCREW SELF TAPPING WITH T25 STARDRIVE RECESS, 3, EA; LI 130, 690.362: LARGE FRAGMENT LCP SCREW SET GRAPHIC CASE, 1, EA; LI 131, 319.97: SCREW FORCEPS, 1, EA; LI 132, 207.630: 4.0MM 30MM CANNULATED SCREW SHORT THREAD, 2, EA; LI 133, 207.632: 4.0MM 32MM CANNULATED SCREW SHORT THREAD, 2, EA; LI 134, 207.634: 4.0MM 34MM CANNULATED SCREW SHORT THREAD, 2, EA; LI 135, 207.636: 4.0MM 36MM CANNULATED SCREW SHORT THREAD, 2, EA; LI 136, 207.638: 4.0MM 38MM CANNULATED SCREW SHORT THREAD, 2, EA; LI 137, 207.640: 4.0MM 40MM CANNULATED SCREW SHORT THREAD, 2, EA; LI 138, 207.642: 4.0MM 42MM CANNULATED SCREW SHORT THREAD, 2, EA; LI 139, 207.644: 4.0MM 44MM CANNULATED SCREW SHORT THREAD, 2, EA; LI 140, 207.646: 4.0MM 46MM CANNULATED SCREW SHORT THREAD, 2, EA; LI 141, 207.648: 4.0MM 48MM CANNULATED SCREW SHORT THREAD, 2, EA; LI 142, 207.650: 4.0MM 50MM CANNULATED SCREW SHORT THREAD, 2, EA; LI 143, 207.740: 4.0MM 40MM CANNULATED SCREW LONG THREAD, 2, EA; LI 144, 207.742: 4.0MM 42MM CANNULATED SCREW LONG THREAD, 2, EA; LI 145, 207.744: 4.0MM 44MM CANNULATED SCREW LONG THREAD, 2, EA; LI 146, 207.746: 4.0MM 46MM CANNULATED SCREW LONG THREAD, 2, EA; LI 147, 207.748: 4.0MM 48MM CANNULATED SCREW LONG THREAD, 2, EA; LI 148, 207.750: 4.0MM 50MM CANNULATED SCREW LONG THREAD, 2, EA; LI 149, 456.415S: 11MM/130DEG TI CANNULATED TROCHANTERIC FIXATION NAIL 340MM LEFT, 1, EA; LI 150, 04.013.464S: 10MM TITANIUM CNANULATED RETROGRADE/ANTEGRADE FEMORAL NAIL-EX 420MM, 1, EA; LI 151, 281.140: 135 DEG DHS PLATE-STANDARD BARREL 4 HOLES/78MM, 1, EA; LI 152, 241.371: LCP ONE-THIRD TUBULAR PLATE WITH COLLAR 7 HOLES/81MM, 3, EA; LI 153, 223.581: 3.5MM LCP PLATE 8 HOLES 111MM, 1, EA; LI 154, 212.101: 3.5MM LOCKING SCREW SELF TAPPING W/STARDRIVE 10MM, 5, EA; LI 155, 212.102: 3.5MM LOCKING SCREW SELF TAPPING W/STARDRIVE 12MM, 5, EA; LI 156, 212.105: 3.5MM LOCKING SCREW SELF TAPPING W/STARDRIVE 18MM, 5, EA; LI 157, 212.816: 2.4MM LOCKING SERW SELF TAPPING WITH STARDRIVE 16MM, 3, EA; LI 158, 212.818: 2.4MM LOCKING SCREW SELF TAPPING WIHT STARDRIVE 18MM, 3, EA; LI 159, 212.822: 2.4MM LOCKING SCREW SELF TAPPING WITH STARDRIVE 22MM, 3, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, VHA NCO 07 - 534 - Charleston, SC intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. VHA NCO 07 - 534 - Charleston, SC is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 60 calendar days after close of Buy. Offeror must be registered in the Central Contractor Registration (CCR) database before an award can be made to them. If the offeror is not registered in the CCR, it may do so through the CCR website at http://www.ccr.gov. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/. In addition to any VHA buy terms entered in FedBid, the Seller (Bidder) has reviewed and acknowledges any attached solicitation documents, item details, delivery schedule, and/or instructions to Seller (collectively referred to as requirements), and agrees to all terms and conditions set forth in the solicitation documents. While additional support documentation (e.g. technical specifications, etc.) may be requested, pricing shall be entered in the reverse auction - offline pricing is not an acceptable bid. At the conclusion of the reverse auction, if attached to the buy, the awardee may be required to complete the solicitation documents at the time of award. If the offeror is not the manufacturer of the quoted items, the Offeror shall submit evidence at the time of quote submission that clearly verifies that the Offeror is an authorized distributor and/or reseller of the quoted product and will provide the items on or before the specified delivery date.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/VA/ChaVAMC/VAMCCO80220/VA247-12-Q-0973/listing.html)
- Place of Performance
- Address: Hanahan, SC 29410
- Zip Code: 29410
- Zip Code: 29410
- Record
- SN02848974-W 20120823/120822000808-78fd3c95505f14e51d9bd14b84396ea8 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |