Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
FBO DAILY ISSUE OF AUGUST 16, 2012 FBO #3918
SOURCES SOUGHT

32 -- CYC-247 Cyclone Dust Collection System

Notice Date
8/14/2012
 
Notice Type
Sources Sought
 
NAICS
333411 — Air Purification Equipment Manufacturing
 
Contracting Office
Department of the Air Force, Air Combat Command, 366 CONS, 366 Gunfighter Ave Ste 498, Mountain Home AFB, Idaho, 83648-5258
 
ZIP Code
83648-5258
 
Solicitation Number
F3F3W12209A901
 
Archive Date
9/4/2012
 
Point of Contact
Matthew A Steele, Phone: 2088283108
 
E-Mail Address
matthew.steele@mountainhome.af.mil
(matthew.steele@mountainhome.af.mil)
 
Small Business Set-Aside
N/A
 
Description
***This requirement is currently UNFUNDED. *** The 366th Contracting Squadron is seeking a potential source interested in proposing on an acquisition CYC-247 Cyclone Dust Collection System. If your company is able to provide the supplies requested and are interested in this acquisition please submit the following: 1. Point of contact, including a phone number, physical and e-mail address 2. Size status and or SBA certification program of your company 3. Cage Code for your company See salient characteristics below: CLIN 0001: 1 Each: Cyclone Dust Extraction & Collection system Complete installation including setup, wiring to electrical source, complete installation of all ducting, automated gates at saw equipment source and exterior collection system. Entire system must comply with current ACGIH ventilation requirements (ACGIH Industrial Ventilation Manual 26th Edition, Dated 2004) and meet specifications per saw equipment below. Include minimum 1 year warranty on all parts and installation, system test after installation and operational training to user. - 36" Band Saw: 4" dust port at the base. Pull 350 CFM at the bottom, 550 CFM at the top and a total of 900 CFM for a blade width up to 3 inches (IAW ACGIH ventilation manual pg. 13-163) - 14" Band Saw: 3" dust port at the base. Pull 350 CFM at the bottom, 550 CFM at the top and a total of 900 CFM for a blade width up to 3 inches (IAW ACGIH ventilation manual pg. 13-163) - Cabinet Saw (table saw) 12": 4" dust port. Pull 545 CFM at the base and 350 CFM at the guard for a blade up to 16 inches in diameter (IAW ACGIH ventilation manual pg. 13-164) - Radial Arm Saw 12": Dust port required behind the blade. Pull 500 CFM (450 CFM at the bottom hood and 50 CFM through the flexible hose) and maintain a duct velocity of 4000 FPM (IAW ACGIH ventilation manual pg. 13-1685) System to be installed on exterior NE corner of LRC, bldg 1132, concrete already in place, must enter bldg to woodshop through 10" diameter round opening in brick wall 114" on center above concrete. Power must be 208V, 3 Phase. Power must be pulled through exixting piping to CB Panel and connected. **This sources sought notice is for information and planning purposes only. It does not constitute a solicitation and is not to be considered as a commitment by the Government. All firms responding to this sources sought notice are advised that their responses to this notice are not a request that will be considered for contract award. **
 
Web Link
FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/ACC/366CONS/F3F3W12209A901/listing.html)
 
Place of Performance
Address: Mountain Home AFB, ID 83648, Mountain Home AFB, Idaho, 83648, United States
Zip Code: 83648
 
Record
SN02838303-W 20120816/120815000026-a520720c5e48d22e7b85bed8c705d190 (fbodaily.com)
 
Source
FedBizOpps Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  Jenny in Wanderland!  © 1994-2024, Loren Data Corp.