MODIFICATION
66 -- Machine Gun Red Dot Sight
- Notice Date
- 8/7/2012
- Notice Type
- Modification/Amendment
- NAICS
- 333314
— Optical Instrument and Lens Manufacturing
- Contracting Office
- MICC - Fort Stewart, Directorate of Contracting, 976 William H Wilson Ave, Ste 100, Fort Stewart, GA 31314-3322
- ZIP Code
- 31314-3322
- Solicitation Number
- W9124M12QBC21
- Response Due
- 8/30/2012
- Archive Date
- 10/29/2012
- Point of Contact
- Brandon M. Chapman, 912-767-8654
- E-Mail Address
-
MICC - Fort Stewart
(brandon.m.chapman.mil@mail.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- Combined synopsis/solicitation W9124M-12-Q-BC21 is being amended to include the following: I. Product Specifications: [ADD] CLIN 0001 - add the additional description/part numbers: a. PN: DCL120-432P-1KIT b. Description: DCL120-1 Red Dot Sight.50 cal kit,.50 cal weapons mount, AN/PEQ-11A (DIAL-100G), and.50 cal Flash hider. c. Major contents PNs: 855-DCL120-1MNT, 432P, 2300F [ADD] CLIN 0002 - add the additional description/part numbers: a. PN: DCL110-432P-KIT b. Description: DCL110 Red Dot Sight M240 Kit, AN/PEQ-11A (DIAL-100G), and 7.62mm cal Flash hider c. Major contents PNs: 855-DCL110, 432P, 240F II. [ADD] Attachment: IAW FAR 6.302-1, Limted Source Justification (J&A) is attached III. Solicitation Provisions: [ADD] 52.211-6 Brand Name or Equal. As prescribed in 11.107(a), insert the following provision: BRAND NAME OR EQUAL (AUG 1999) (a) If an item in this solicitation is identified as "brand name or equal," the purchase description reflects the characteristics and level of quality that will satisfy the Government's needs. The salient physical, functional, or performance characteristics that "equal" products must meet are specified in the solicitation. (b) To be considered for award, offers of "equal" products, including "equal" products of the brand name manufacturer, must- (1) Meet the salient physical, functional, or performance characteristic specified in this solicitation; (2) Clearly identify the item by- (i) Brand name, if any; and (ii) Make or model number; (3) Include descriptive literature such as illustrations, drawings, or a clear reference to previously furnished descriptive data or information available to the Contracting Officer; and (4) Clearly describe any modifications the offeror plans to make in a product to make it conform to the solicitation requirements. Mark any descriptive material to clearly show the modifications. (c) The Contracting Officer will evaluate "equal" products on the basis of information furnished by the offeror or identified in the offer and reasonably available to the Contracting Officer. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer. (d) Unless the offeror clearly indicates in its offer that the product being offered is an "equal" product, the offeror shall provide the brand name product referenced in the solicitation. (End of provision) [ADD] 252.225-7001 Buy American and Balance of Payments Program. As prescribed in 225.1101(2)(i), use the following clause: BUY AMERICAN AND BALANCE OF PAYMENTS PROGRAM (JUN 2012) (a) Definitions. As used in this clause "Commercially available off-the-shelf (COTS) item"- (i) Means any item of supply (including construction material) that is- (A) A commercial item (as defined in paragraph (1) of the definition of "commercial item" in section 2.101 of the Federal Acquisition Regulation); (B) Sold in substantial quantities in the commercial marketplace; and (C) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and (ii) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products. "Component" means an article, material, or supply incorporated directly into an end product. "Domestic end product" means- (i) An unmanufactured end product that has been mined or produced in the United States; or (ii) An end product manufactured in the United States if- (A) The cost of its qualifying country components and its components that are mined, produced, or manufactured in the United States exceeds 50 percent of the cost of all its components. The cost of components includes transportation costs to the place of incorporation into the end product and U.S. duty (whether or not a duty-free entry certificate is issued). Scrap generated, collected, and prepared for processing in the United States is considered domestic. A component is considered to have been mined, produced, or manufactured in the United States (regardless of its source in fact) if the end product in which it is incorporated is manufactured in the United States and the component is of a class or kind for which the Government has determined that- (1) Sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States; or (2) It is inconsistent with the public interest to apply the restrictions of the Buy American statute; or (B) The end product is a COTS item. "End product" means those articles, materials, and supplies to be acquired under this contract for public use. "Foreign end product" means an end product other than a domestic end product. "Qualifying country" means a country with a reciprocal defense procurement memorandum of understanding or international agreement with the United States in which both countries agree to remove barriers to purchases of supplies produced in the other country or services performed by sources of the other country, and the memorandum or agreement complies, where applicable, with the requirements of section 36 of the Arms Export Control Act (22 U.S.C. 2776) and with 10 U.S.C. 2457. Accordingly, the following are qualifying countries: Australia Austria Belgium Canada Czech Republic Denmark Egypt Finland France Germany Greece Israel Italy Luxembourg Netherlands Norway Portugal Spain Sweden Switzerland Turkey United Kingdom of Great Britain and Northern Ireland. "Qualifying country component" means a component mined, produced, or manufactured in a qualifying country. "Qualifying country end product" means- (i) An unmanufactured end product mined or produced in a qualifying country; or (ii) An end product manufactured in a qualifying country if - (A) The cost of the following types of components exceeds 50 percent of the cost of all its components: (1) Components mined, produced, or manufactured in a qualifying country. (2) Components mined, produced, or manufactured in the United States. (3) Components of foreign origin of a class or kind for which the Government has determined that sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States; or (B) The end product is a COTS item. "United States" means the 50 States, the District of Columbia, and outlying areas. (b) This clause implements 41 U.S.C chapter 83, Buy American. In accordance with 41 U.S.C. 1907, the component test of the Buy American statute is waived for an end product that is a COTS item (see section 12.505(a)(1) of the Federal Acquisition Regulation). Unless otherwise specified, this clause applies to all line items in the contract. (c) The Contractor shall deliver only domestic end products unless, in its offer, it specified delivery of other end products in the Buy American Balance of Payments Program Certificate provision of the solicitation. If the Contractor certified in its offer that it will deliver a qualifying country end product, the Contractor shall deliver a qualifying country end product or, at the Contractor's option, a domestic end product. (d) The contract price does not include duty for end products or components for which the Contractor will claim duty-free entry. (End of clause) IV. Contracting Office Address: 976 William H Wilson Ave, Fort Stewart, GA 31314 Place of Performance: FORT STEWART, GA 31314 Point of Contact(s): CPT Brandon Chapman Phone: (912)767-8654 Fax: (912)767-8440 Email: brandon.m.chapman.mil@mail.mil
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/9d3e9909fcf9e6b8f33e04a6beb9da35)
- Place of Performance
- Address: MICC - Fort Stewart Directorate of Contracting, 976 William H Wilson Ave, Ste 100 Fort Stewart GA
- Zip Code: 31314-3322
- Zip Code: 31314-3322
- Record
- SN02829960-W 20120809/120808000721-9d3e9909fcf9e6b8f33e04a6beb9da35 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |