SOLICITATION NOTICE
66 -- INFRARED INTEGRATING SPHERE - Package #1
- Notice Date
- 8/2/2012
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 334516
— Analytical Laboratory Instrument Manufacturing
- Contracting Office
- Department of Commerce, National Institute of Standards and Technology (NIST), Acquisition Management Division, 100 Bureau Drive, Building 301, Room B129, Mail Stop 1640, Gaithersburg, Maryland, 20899-1640, United States
- ZIP Code
- 20899-1640
- Solicitation Number
- NB685040-12-05330
- Archive Date
- 8/28/2012
- Point of Contact
- Prateema E. Carvajal, Phone: 301-975-4390, Todd D Hill, Phone: 301-975-8802
- E-Mail Address
-
prateema.carvajal@nist.gov, todd.hill@nist.gov
(prateema.carvajal@nist.gov, todd.hill@nist.gov)
- Small Business Set-Aside
- N/A
- Description
- drawings/sketches THIS IS A COMBINED SYNOPSIS/SOLICITATION FOR COMMERCIAL ITEMS PREPARED IN ACCORDANCE WITH THE FORMAT IN FAR SUBPART 12.6-STREAMLINED PROCEDURES FOR EVALUATION AND SOLICITATION FOR COMMERCIAL ITEMS-AS SUPPLEMENTED WITH ADDITIONAL INFORMATION INCLUDED IN THIS NOTICE. THIS ANNOUNCEMENT CONSTITUTES THE ONLY SOLICITATION; QUOTATIONS ARE BEING REQUESTED, AND A WRITTEN SOLICITATION DOCUMENT SHALL NOT BE ISSUED. THE SOLICITATION IS BEING ISSUED USING SIMPLIFIED ACQUISITION PROCEDURES. This solicitation is a Request for Quotation (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2005-60. The associated North American Industrial Classification System (NAICS) code for this procurement is 334516 with a small business size standard of 500 employees. However, this requirement is unrestricted and all interested Contractor's may submit a quote. 1352.215-72 INQUIRIES (APR 2010) Offerors must submit all questions concerning this solicitation in writing to both the Contract Specialist (Prateema.carvajal@nist.gov) and the Contracting Officer (todd.hill@nist.gov). Questions should be received no later than 7 calendar days after the issuance date of this solicitation. Any responses to questions will be made in writing, without identification of the questioner, and will be included in an amendment to the solicitation. Even if provided in other form, only the question responses included in the amendment to the solicitation will govern performance of the contract. Background information: NIST has a facility for measuring very low reflectance levels in the infrared using laser sources. The primary application of this facility is for the characterization of cavities used in high accuracy radiometers and blackbody reference sources. The key element of the facility is an integrating sphere system which is used to collect the reflected light from samples and cavities that are measured. The existing system, called the Complete Hemispherical Infrared Laser-based Reflectometer (CHILR), is limited to the measurement of cavities with a maximum of 50 mm diameter apertures. There is an unmet need for the characterization of larger aperture cavities. This procurement is for and integrating sphere which will be able to accurately measure such cavities, up to 200 mm in diameter. LINE ITEM 0001: One (1) each, Infrared Integrating Sphere Must meet the following minimum specifications: 1. Sphere inner diameter d: 500 mm ± 0.5 mm. 2. The sphere shall have 4 main ports (see drawings/sketches). 3. A collection port (P1) with diameter d1: 200 mm ± 0.5 mm. 4. An input port (P2) with diameter d2 = d1. 5. Two detector ports (P3 and P4), with diameters of d3 and d4: 12.5 mm ± 0.1 mm. 6. P1 and P2 located opposite each other on the sphere. 7. P3 located midway (90° ± 0.2°) in the horizontal plane. 8. P4 located midway (90° ± 0.2°) in the vertical plane. 9. All ports have "knife edge" designs, with a maximum edge thickness of 0.5 mm. 10. P3 and P4 have flange designs for mounting detectors or optics, with a diameter df ≥ 50 mm, and at least 4 tapped mounting holes appropriately located. 11. P1 shall have a structure accommodating the translation of the Sample Slide (SS1) described below and shown in the drawings. 12. P1 shall also have a flat surface with tapped holes to allow attachment of potential additional user elements. 13. The Sample Slide (SS1) shall translate between 3 positions, placing 200 mm circular ports on it to match with P1 of the integrating sphere. 14. The general arrangement of the SS1 is shown in the drawings. The three ports contain 1) a diffuse gold disc coated with the same coating as the integrating sphere; 2) and empty hole, behind which will be the user provided cavity to be measured; and 3) a black painted disc (user painted - vendor to provide substrate disc only). 15. The vendor shall supply 2 each of the diffuse gold and bare substrate 200 mm dia. discs, as well as 2 each 25.4 mm and 50.8 diameter mm discs of the sphere coating for reflectance characterization. 16. Each SS1 port should be designed to keep a disc sample in place without additional movement when the slide is translated. 17. The SS1 thickness should be minimized to reduce the distortion of the spherical shape, but sufficient to accommodate the discs, as well as to insure flatness of all discs. 18. The SS1 translation should be motorized, with movement under computer control. 19. When the SS1 is in the central empty port position (i.e. lined up with P1) the area within a 300 mm radius directly behind the port shall be free of any obstruction. This is to allow the placement of customer blackbodies flush up against the SS1 and P1. 20. P2 shall have a Cap (C1) of spherical shape to match the spherical surface of the main sphere. 21. C1 shall have a mechanism (one possible design of which is shown in the drawings) by which a 6 mm ± 0.25 mm diameter port (P5) can be located to any position within P2 in a motorized, computer-controllable and repeatable (to within 0.2 mm) fashion. 22. A second similar cap (C2) shall be interchangeable with C1, having a 12 mm ± 0.25 mm diameter port (P6). 23. C1 and C2 shall be designed to minimize deviation from a uniform diffuse interior spherical surface. 24. The suggested design of C1 and C2 involves a spherical cap with a slot running from the center to edge in one direction. The cap rotates to cover the entire P2 port. In addition a small slide with a 6 mm (or 12 mm) hole, translates in the radial direction of the slot. The combined translation and rotation enables the placement of the port P5 (or P6) anywhere within P2. 25. The integrating sphere shall be separable into individual hemispheres to enable placement and removal of baffles and other items. 26. Any seam or gap between parts of the sphere inner surface shall be minimized, less than 0.5 mm over its entire length. These include those between i) P1 and SS1, ii) P2 and C1 and C2, and iii) the seam between the hemispheres shall be less than 0.5 mm over its entire length. 27. Interchangeable removable baffles between the ports P1 and P2, and P3 and P4 shall be provided, to block light directly reflecting to the detectors. Both specular and diffuse versions of each baffle shall be provided. In addition, diffuse-coated plugs shall be provided for the baffle mounting holes, should the sphere be operated with the baffles are removed. 28. The coatings used for the sphere inner surface, caps and other interior elements shall be as close to ideal as feasible. 29. All diffuse surfaces shall have a bi-directional reflectance distribution function (BRDF) for normal incidence reflection that does not vary by more than a factor of 2.5 between 0° and 80° viewing, at 10.6 µm wavelength. Preference to smaller values. 30. All diffuse surfaces shall have a near-normal spectral directional-hemispherical reflectance (DHR) of not less than 0.965 between 2 µm and 18 µm. Preference to higher values. 31. All specular surfaces shall have a reflectance of not less than 0.985 between 2 µm and 18 µm. Preference to higher values.. 32. All computer control of the system shall be amenable to operation with National Instrument's LabView vi's. 33. The fully assembled integrating sphere shall be provided with an adapter mounting plate or mounting holes in the sphere supporting structure, underneath the sphere assembly, which can be used to mount onto a user provided motorized rotation stage such as a Newport Model RV160CC. Delivery terms shall be FOB Destination and made within 6 months from date of award. Award shall be made to the Contractor whose quote offers the ebst value to the Governement, price and other factors considered. The Government will evaluate quotations based on the following evaluation criteria: 1) Technical Capability factor "Meeting or Exceeding the Requirement" and 2) Price. Technical Capability: Evaluation of Technical Capability will be based on the information provided in the quotation. NIST will evaluate whether the offeror has demonstrated that its proposed equipment meets or exceeds all minimum requirements. Quotations that do not demonstrate the proposed equipment meets all requirements will not be considered further for award. If an offeror does not indicate whether its proposed equipment meets a certain minimum requirement, NIST will determine that it does not.. UNDER THE TECHNICAL CAPABILITY FACTOR, PREFERNCE WILL BE GIVEN TO THE QUOTE THAT EXCEEDS THE FOLLOWING MINIMUM SPECIFICATIONS: 1. All specular surfaces shall have a reflectance of not less than 0.985 between 2 µm and 18 µm. Preference will be given to higher values. Price: Quoted price shall be evaluated for reasonableness. 1352.246-70 PLACE OF ACCEPTANCE (APR 2010) Inspection will be done at the NIST Gaithersburg facility. All minimum specifications must be successfully demonstrated. The full text of a CAR provision or clause may be accessed electronically at http://farsite.hill.af.mil/vfcara.htm 1352.201-70 Contracting Officer's Authority; 1352.209-73 Compliance with the laws; 1352.209-74 Organizational conflict of interest 1352.271-83- Government review, comment, acceptance and approval 1352.233-70 AGENCY PROTESTS (APR 2010) (a) An agency protest may be filed with either: (1) the contracting officer, or (2) at a level above the contracting officer, with the appropriate agency Protest Decision Authority. See 64 Fed. Reg. 16,651 (April 6, 1999) (b) Agency protests filed with the Contracting Officer shall be sent to the following address: NIST/ACQUISITION MANAGEMENT DIVISION ATTN: TODD HILL, CONTRACTING OFFICER 100 Bureau Drive, MS 1640 Gaithersburg, MD 20899 (c) Agency protests filed with the agency Protest Decision Authority shall be sent to the following address: NIST/ACQUISITION MANAGEMENT DIVISION ATTN: HEAD OF THE CONTRACTING OFFICE (HCO) 100 Bureau Drive, MS 1640 Gaithersburg, MD 20899 (d) A complete copy of all agency protests, including all attachments, shall be served upon the Contract Law Division of the Office of the General Counsel within one day of filing a protest with either the Contracting Officer or the Protest Decision Authority. (e) Service upon the Contract Law Division shall be made as follows: U.S. Department of Commerce Office of the General Counsel Chief, Contract Law Division Room 5893 Herbert C. Hoover Building 14th Street and Constitution Avenue, N.W. Washington, D.C. 20230. FAX: (202) 482-5858 (End of clause) 1352.233-71 GAO AND COURT OF FEDERAL CLAIMS PROTESTS (APR 2010) (a) A protest may be filed with either the Government Accountability Office (GAO) or the Court of Federal Claims unless an agency protest has been filed. (b) A complete copy of all GAO or Court of Federal Claims protests, including all attachments, shall be served upon (i) the Contracting Officer, and (ii) the Contract Law Division of the Office of the General Counsel, within one day of filing a protest with either GAO or the Court of Federal Claims. (c) Service upon the Contract Law Division shall be made as follows: U.S. Department of Commerce Office of the General Counsel Chief, Contract Law Division Room 5893 Herbert C. Hoover Building 14th Street and Constitution Avenue, N.W. Washington, D.C. 20230. FAX: (202) 482-5858 The full text of a FAR provision or clause may be accessed electronically at http://acquisition.gov/comp/far/index.html. The following provisions apply to this acquisition: 52.212-1 Instructions to Offerors-Commercial Items; 52.212-3 Offerors Representations and Certifications- Commercial Items. Offerors must complete annual representations and certifications on-line at http://orca.bpn.gov in accordance with FAR 52.212-3 Offerors Representations and Certifications- Commercial Items. If paragraph (j) of the provision is applicable, a written submission is required. The following clauses apply to this acquisition: 52.212-4 Contract Terms and Conditions-Commercial Items; 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items including subparagraphs: 52.204-10, Reporting Executive compensation and First-Tier Subcontract Awards (Jul 2010) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. 52.219-28, Post-Award Small Business Program Re-Representation; 52.222-3, Convict Labor; 52.222-19 Child Labor - Cooperation With Authorities And Remedies; 52.222-21, Prohibition of Segregated Facilities; 52-222-26, Equal Opportunity; 52.222-36, Affirmative Action for Workers with Disabilities; 52.223-18, Contractor policy to ban text messaging while driving; 52.225-3, Buy America Act-Free trade Agreement (ii) Alternate I (Jan 2004 of 52.225-3 52.225-13 Restriction on Certain Foreign Purchases; 52.232-33 Payment by Electronic Funds Transfer-Central Contractor Registration. Department of Commerce Agency-Level Protest Procedures Level above the Contracting Officer is also incorporated. It can be downloaded at www.nist.gov/admin/od/contract/agency.htm. Representation by Corporations Regarding an Unpaid Delinquent Tax Liability or a Felony Conviction Under Any Federal Law (Class Deviation) (March 2012) 1) In accordance with Sections 543 and 544 of Public Law 112-55 Commerce, Justice, Science, and Related Agencies Appropriations Act 2012, Title V (General Provisions) none of the funds made available by that Act may be used to enter into a contract with any corporation that- a) Was convicted of a felony criminal violation under any Federal law within the preceding 24 months, unless the agency has considered suspension or debarment of the corporation and made a determination that this further action is not necessary to protect the interests of the Government. b) Has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability, unless the agency has considered suspension or debarment of the corporation and made a determination that this further action is not necessary to protect the interests of the Government. 2) The Offeror represents that, as of the date of this offer- a) It is [ ] is not [ ] a corporation that was convicted of a felony criminal violation under a Federal law within the preceding 24 months. b) It is [ ] is not [ ] a corporation that has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreements with the authority responsible for collecting the tax liability. All quoters shall submit the following: 1) An original and one (1) copy of a quotation which addresses Line Item 0001; 2) An original and one (1) copy of the technical description and/or product literature; 3) An original and one (1) copy of the most recent published price list(s); 4) Country of Origin information for the line item. Acceptance of terms and conditions (addendum to FAR 52.212-1(b)(11): This is a Combined Synopsis/Solicitation for equipment as defined herein. The Government intends to award a Purchase Order as a result of this Combined Synopsis/Solicitation that shall include the terms and conditions that are set forth herein. In order to facilitate the award process, ALL quotes shall include a statement regarding the terms and conditions herein as follows: The offeror shall state "The terms and conditions in the solicitation are acceptable to be included in the award document without modification, deletion, or addition." OR The offeror shall state "The terms and conditions in the solicitation are acceptable to be included in the award document with the exception, deletion, or addition of the following: Offeror shall list exception(s) and rationale for the exception(s) Please note that this procurement is not being conducted under the GSA Federal Supply Schedule (FSS) program or another Government-Wide Area Contract (GWAC). If an offeror submits a quotation based upon an FSS or GWAC contract, the Government shall accept the quoted price. However, the terms and conditions stated herein shall be included in any resultant Purchase Order, not the terms and conditions of the offeror's FSS or GWAC contract, and the statement required above shall be included in the quotation. All quotes shall be received not later than 8:00 am, EST, on August 13, 2012 at the National Institute of Standards & Technology, Acquisition Management Division, 100 Bureau Drive, Building 301, Room B125, Mail Stop 1640, Gaithersburg, MD 20899-1640, Attn: Prateema Carvajal. Fax quotations shall not be accepted. Email quotations shall be accepted at Prateema.carvajal@nist.gov. Offeror's quotations shall not be deemed received by the Government until the quotation is entered into the e-mail address inbox set forth above. Because of heightened security, FED-EX, UPS, or similar delivery methods are the preferred method of delivery of quotes. If quotes are hand delivered, delivery shall be made on the actual due date through Gate A, and a 24-hour (excluding weekends and holidays) prior notice shall be provided to Prateema Carvajal, 301-975-4390.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DOC/NIST/AcAsD/NB685040-12-05330/listing.html)
- Place of Performance
- Address: NIST, 100 Bureau Drive, Gaithersburg, Maryland, 20899, United States
- Zip Code: 20899
- Zip Code: 20899
- Record
- SN02825587-W 20120804/120803001318-db52aeb1407cb01d704f02a0dfe15ed8 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |