PRESOL | 80 | Hardware | 04-Aug-12

FBO DAILY ISSUE OF AUGUST 04, 2012 FBO #3906
SOLICITATION NOTICE

80 -- Hardware

Notice Date: 8/2/2012
Notice Type: Combined Synopsis/Solicitation
Contracting Office: BLDG 476 PSNS street W, BRemerton, WA 98314
ZIP Code: 98314
Solicitation Number: N62758-2181-7449
Response Due: 8/7/2012
Archive Date: 2/3/2013
Point of Contact: Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
E-Mail Address: Clientservices@fedbid.com;
Small Business Set-Aside: Total Small Business
Description: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is N62758-2181-7449 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-58. The associated North American Industrial Classification System (NAICS) code for this procurement is 339994 with a small business size standard of 500.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2012-08-07 11:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Multiple shipping information. The FLC - Puget Sound requires the following items, Brand Name or Equal, to the following: LI 001, 20915T2 MCMASTER CARR SUPPLY INC WRAP CLEAR STRETCH ROLL SIZE: 20"WD X 1000 FT LG ROLL DIA: 3.384" GAUGE: 0.0008" PER ROLL: FULL CASE ROLLS/CASE: 4 EA COLOR: CLEAR, 2, RO; LI 002, 20915T3 MCMASTER CARR SUPLY INC WRAP CLEAR STRETCH SIZE: 30:W X 1000 FT LG COLOR: CLEAR STRETCH WRAP WITH DISPENSING HANDLES COMFORT HANDLE., 4, RO; LI 003, 7231T45 MCMASTER CARR SUPPLY INC BRUSH SINGLE-SPIRAL THD-SHANK 9/16" BRASS MATERIAL: BRASS BRUSH DIA: 9/16" BRUSH LG: 4" MALE THREAD: 1/4"-28 BRISTLE DIA: 0.0006" 0.005", 20, EA; LI 004, 7231T46 MCMASTER CARR SUPPLY INC BRUSH SINGLE-SPIRAL THD-SHANK 5/8" BRASS MATERIAL: BRASS BRUSH DIA: 5/8" BRUSH LG: 4" MALE THREAD: 1/4"-28 BRISTLE DIA:0.005", 20, EA; LI 005, 7231T47 MCMASTER CARR SUPPLY INC BRUSH SINGLE-SPIRAL THD-SHANK 11/16" BRASS MATERIAL: BRASS BRUSH DIA: 11/16" BRUSH LG: 4" MALE THREAD: 1/4"-28 BRISTLE DIA:0.006", 20, EA; LI 006, 7231T48 MCMASTER CARR SUPPLY INC BRUSH SINGLE-SPIRAL THD-SHANK 3/4" BRASS MATERIAL: BRASS BRUSH DIA: 3/4" BRUSH LG: 4" MALE THREAD: 1/4"-28 BRISTLE DIA:0.006", 20, EA; LI 007, 7231T49 MCMASTER CARR SUPPLY INC BRUSH SINGLE-SPIRAL THD-SHANK 3/4" BRASS MATERIAL: BRASS BRUSH DIA: 3/4" BRUSH LG: 4" MALE THREAD: 1/4"-28 BRISTLE DIA:0.006", 10, EA; LI 008, 7231T51 MCMASTER CARR SUPPLY INC BRUSH SINGLE-SPIRAL THD-SHANK 7/8" BRASS MATERIAL: BRASS BRUSH DIA: 7/8" BRUSH LG: 4" MALE THREAD: 1/4"-28 BRISTLE DIA:0.008", 10, EA; LI 009, 77845T84 MCMASTER CAR ROLLER KIT DISPOSABLE PAINT ROLLERS MINIPLASTIC PAINT TRAY COVER IS 1" DIA X 3" LG. WITH A 1/4" LONG MOHAIR NAP ON APOLYPROPYLENE CORE USE ON SMOOTH SURFACE ROLLER HAS A 5" LONG PLASTIC HANDLE, 150, PG; LI 010, 5109T51 MCMASTER CARR BOTTLE PLASTIC WIDE-MOUTH CAPACITY:4OZ 125ML MOUTH OD:38MM O ALL BASE DIA: 1-7/8" O ALL HT: 4-3/4", 100, EA; LI 011, 4280T31 MCMASTER CARR BOTTLE PLASTIC WIDE-MOUTH CAPACITY:1OZ 30ML MOUTH OD:22MM O ALL BASE DIA: 1-1/4" O ALL HT: 2-3/4", 100, EA; LI 012, 4304A36 MCMASTER CARR BUR,12 PIECE SET W/ 1/8" SHANK DIAMETER HEAD DIA: X LG. OF CUT 1/8" X 5/8" AND 1/4" X 1/2" CYLINDRICAL-FLAT END 1/8" X 5/8" CYLINDRICAL-RADIUS END 1/4" X 1/2" TREE-POINTED END 1/4" X 1/4" AND 3/8"X 3/8" BALL, 1/4' X 1/2" OVAL/EGG 1/8 X 9/16" CONE WITH 9-1/2"X DEG INCLUDED ANGLE 1/4 X 1/2" CONE WITH 24 DEG INCLUDED ANGLE 3/8 X 3/8" CONE WITH 51 DEG INCLUDED ANGLE 5.8" X 1/8" THIN DISC-SQUARE EDGE, AND 5/8" X 1/8" THIN DISC- RADIUS EDGE 1/4 X 1/2" CONE WITH 24 DEG INCLUDED ANGLE, 2, SE; LI 013, 4285T63 MCMASTER CARR BOTTLE SQUEEZE WITH ANGLED NOZZLE 16 OZ EXTREME DUTY FED SQUEEZE BOTTLE CAP: 16 OZ O ALL DIA: 2-7/8" O ALL HT: 8-13/16", 2, EA; LI 014, 4280T32 MCMASTER CARR BOTTLE PLASTIC WIDE-MOUTH, 2 OZ CAPACITY: 2 OZ... 60ML MOUTH OD: 26MM O ALL BASE DIA: 1-9/16" O ALL HT: 3 1/4" QTY 100EA, 100, EA; LI 015, 7231T52 MCMASTER CARR SUPPLY INC BRUSH SINGLE-SPIRAL THD-SHANK 7/8" BRASS MATERIAL: BRASS BRUSH DIA: 15/16" BRUSH LG: 4" MALE THREAD: 1/4"-28 BRISTLE DIA: 0.008", 10, EA; LI 016, 7231T53 MCMASTER CARR SUPPLY INC BRUSH SINGLE-SPIRAL THD-SHANK 1" BRASS MATERIAL: BRASS BRUSH DIA: 1" BRUSH LG: 4" MALE THREAD: 1/4"-28 BRISTLE DIA: 0.008", 10, EA; LI 017, 7231T14 MCMASTER CARR SUPPLY INC BRUSH SINGLE-SPIRAL THD-SHANK 1-1/4" BRASS MATERIAL: BRASS BRUSH DIA: 1-1/4" BRUSH LG: 4 1/2" MALE THREAD: 1/4"NPT BRISTLE DIA: 0.006", 10, EA; LI 018, 7231T15 MCMASTER CARR SUPPLY INC BRUSH SINGLE-SPIRAL THD-SHANK 1-1/2" BRASS MATERIAL: BRASS BRUSH DIA: 1-1/2" BRUSH LG: 4 1/2" MALE THREAD: 1/4"NPT BRISTLE DIA: 0.006", 10, EA; LI 019, 7231T16 MCMASTER CARR SUPPLY INC BRUSH SINGLE-SPIRAL THD-SHANK 1-3/4" BRASS MATERIAL: BRASS BRUSH DIA: 1-3/4" BRUSH LG: 4 1/2" MALE THREAD: 1/4"NPT BRISTLE DIA: 0.006", 10, EA; LI 020, 7231T17 MCMASTER CARR SUPPLY INC BRUSH SINGLE-SPIRAL THD-SHANK 2" BRASS MATERIAL: BRASS BRUSH DIA: 2" BRUSH LG: 4 1/2" MALE THREAD: 1/4"NPT BRISTLE DIA: 0.008", 10, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, FLC - Puget Sound intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. FLC - Puget Sound is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. Central Contractor Registration FEB 2012 Contract Terms and Conditions--Commercial Items FEB 2012 Fast Payment Procedure MAY 2006 F.O.B. ORIGIN Export-Controlled Items APR 2010 Item Identification and Valuation (Jun 2011) Alternate I DEC 2011 Levies on Contract Payments DEC 2006 The Contractor is responsible for the delivery of each item quantity within allowable variations, if any. If the Contractor delivers and the Government receives quantities of any item in excess of the quantity called for (after considering any allowable variation in quantity), such excess quantities will be treated as being delivered for the convenience of the Contractor. The Government may retain such excess quantities up to $250 in value without compensating the Contractor therefor, and the Contractor waives all right, title, or interests therein. Quantities in excess of $250 will, at the option of the Government, either be returned at the Contractor's expense or retained and paid for by the Government at the contract unit price. XX(1) 52.222-50, Combating Trafficking in Persons (FEB 2009) (22 U.S.C. 7104(g)). XX Alternate I (Aug 2007) of 52.222-50 (22 U.S.C. 7104(g)). XX (12)(i) 52.219-6, Notice of Total Small Business Set-Aside (NOV 2011) (15 U.S.C. 644). XX (12)(i) 52.219-6, Notice of Total Small Business Set-Aside (NOV 2011) (15 U.S.C. 644). XX (26) 52.222-3, Convict Labor (June 2003) (E.O. 11755). XX (38) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (Aug 2011) (E.O. 13513). XX (42) 52.225-13, Restrictions on Certain Foreign Purchases (June 2008) (E.O.?s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury). XX (27) 52.222-19, Child Labor?Cooperation with Authorities and Remedies (MAR 2012) (E.O. 3126). XX (28) 52.222-21, Prohibition of Segregated Facilities (Feb 1999). XX (29) 52.222-26, Equal Opportunity (Mar 2007) (E.O. 11246). CLAUSES INCORPORATED BY REFERENCE (FEB 1998) 1) XX 252.203-7000, Requirements Relating to Compensation of Former DoD Officials (SEP 2011) (Section 847 of Pub. L. 110-181). (6)(i) XX 252.225-7001, Buy American Act and Balance of Payments Program (OCT 2011) (41 U.S.C. chapter 83, E.O. 10582). All interested parties are hereby advised that the date and time for the Contracting Officer signature and the release of this contractual document are based on US Central Time Zone. All other dates and times are based on local time. To calculate your time in relation to US Central Time Zone, vendors may visit the following url: http://www.timeanddate.com/worldclock/converter.html Disclaimer: this site is not owned or maintained by the U.S. Government and therefore isn't warranted to be correct. This URL is provided as a convenience only and is not intended to preclude use of other time conversion devices. (a) Preservation, packaging, and packing shall be in accordance with ASTM-D-3951 (most current edition), "Standard for Commercial Packing." The unit pack quantity that applies to items under this contract is "Industry Standard". (b) Prohibited Packing Materials. The use of asbestos, excelsior, loose fill polystyrene, newspaper or shredded paper (all types including waxed paper, computer paper and similar hydroscopic or non-neutral material) is prohibited. (c) Non-Manufactured Wood Packing. All non-manufactured wood utilized in wood pallets and wood containers shall be heat treated to a minimum core temperature of 56 degrees centigrade for 30 minutes and certified by an accredited agency recognized by the American Lumber Standards Committee (ALSC). Refer to www.aphis.usda.gov/ppq/swp/eunmwp.html for wood packing policy, enforcement regulations and accredited agencies. Non-coniferous (hardwood) and manufactured wood, such as particleboard and plywood, are exempt from this requirement. Inspection and acceptance of the supplies or services to be furnished hereunder shall be made at destination by the receiving activity. If United Parcel Service (UPS) or Federal Express services are used for transportation, each package must have a unique package identification number. The Government will not consider the manifest as proof of delivery unless each package can be uniquely identified. Acceptance will occur only after the Government can verify actual receipt of the contract items--packaged, marked and labeled as required elsewhere in this contract.
Web Link: FBO.gov Permalink
(https://www.fbo.gov/spg/DON/NAVSUP/N00406/N62758-2181-7449/listing.html)
Place of Performance: Address: Multiple shipping information.; Zip Code: Multiple
Record: SN02824419-W 20120804/120803000013-b056780b61fd5eae3d74b6eec06cb520 (fbodaily.com)
Source: FedBizOpps Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's FBO Daily Index Page |

Loren Data's SAM Daily™

80 -- Hardware