MODIFICATION
34 -- Wire Electric Discharge Machining (EDM) Machine
- Notice Date
- 8/1/2012
- Notice Type
- Modification/Amendment
- NAICS
- 423830
— Industrial Machinery and Equipment Merchant Wholesalers
- Contracting Office
- Department of the Treasury, Bureau of Engraving and Printing (BEP), Office of Acquisition, 14th & C Streets, S.W., Washington, District of Columbia, 20228
- ZIP Code
- 20228
- Solicitation Number
- BEP-RFQ-12-0266
- Archive Date
- 8/30/2012
- Point of Contact
- Abdul-Kudus Yahaya, Phone: 2029278602, Thomas O'Linn, Phone: (202)874-3238
- E-Mail Address
-
abdul-kudus.yahaya@bep.gov, thomas.olinn@bep.gov
(abdul-kudus.yahaya@bep.gov, thomas.olinn@bep.gov)
- Small Business Set-Aside
- Total Small Business
- Description
- Amendment 0001: This purpose of this amendment is to respond to questions submitted by interested vendors. Question 1: What are thicknesses of the sample parts? Response: The thickness of the sample part is 0.1870" +/- 0.0005" Question 2: Is Wire or grind holding tab required? Response: No, it is not required but would be a resultant from a normal wire cutting process. Question 3: Does the holding tab have to be finished by the wire or can it be ground after? Response: There is no need to grind or remove the tab. Question 4: Is the finish of the two sides has to be different or could they both be the same as the better side? Response: They can be the same, but for speed and efficiency the back (smaller radius surface) can have the rougher finish of 8 - 12 micro-inches. Question 5: Are the dimensions shown in the Statement of Need section 4.3 the maximum work piece size? Response: Yes, that is the maximum work-piece size is L 14.5" x W 2" x H 3". Question 6: Must the machine be capable of cutting the part consistently with a 4 Micro-Inch finish? Response: Yes, the Machine must be capable of cutting the part 4 - 8 micro-inch consistently on the larger diameter surface.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/TREAS/BEP/OPDC20220/BEP-RFQ-12-0266/listing.html)
- Record
- SN02823843-W 20120803/120802000819-8e9522fe8a1d1879b4a47e6f66a9cf98 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |