PRESOL | 51 | RFQ-5180-00-293-2875 - RFQ

FBO DAILY ISSUE OF JULY 28, 2012 FBO #3899
SOLICITATION NOTICE

51 -- RFQ-5180-00-293-2875 - RFQ

Notice Date: 7/26/2012
Notice Type: Combined Synopsis/Solicitation
NAICS: 332212 — Hand and Edge Tool Manufacturing
Contracting Office: General Services Administration, Federal Acquisition Service (FAS), FMHAC & HSOC, 1500 East Bannister Road, Kansas City, Missouri, 64131, United States
ZIP Code: 64131
Solicitation Number: RFQ-5180-00-293-2875
Archive Date: 8/18/2012
Point of Contact: Katie Norton, Phone: 8169263582
E-Mail Address: katie.norton@gsa.gov
(katie.norton@gsa.gov)
Small Business Set-Aside: N/A
Description: RFQ REQUEST FOR QUOTATION RFQ-5180-00-293-2875 July 26, 2012 United States of America GSA Global Supply 1500 E. Bannister Road Kansas City, Missouri 64131 Phone: (816) 926-3582 Email: katie.norton@gsa.gov FOR INFORMATION, PLEASE CONTACT: Katie Norton Please submit your response by close of business Friday August 3, 2012 via the above email. Important: This is a request for quotations, and quotations furnished are not offers. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation, or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. If you are unable to quote, please so indicate on this form and return. Please review the attached item purchase description(s). Delivery shall be FOB Destination. Shipment time ____________________ARO (After receipt of order) Price is valid through ____________________________ Vendor's Minimum Order Amount, if any:___________________ Business size: Large _______ or Small ________ Vendor's DUNS Number: ____________________________________ Name & address of vendor and signature of quoter: Name:_____________________________________________________ Address:___________________________________________________ City:_________________________________ State:________________ Telephone: _____________________________FAX: _________________ Print name:___________________________________________________ Signature:____________________________________ Date:_________ PLEASE NOTE: Effective October 1, 2003 all vendors seeking to do business with the Federal Government are required to register with the Central Contract Registration at www.ccr.gov. If you are not registered and are not willing to register we will not be able make an award to your firm. Return pages 1 through 26. Failure to return all pages will result in your quote being removed from consideration. Please note the quantity of 39 is an approximate quantity. This quantity may be shipped to multiple locations and prices should be priced as so. Please provide pricing for the following NSN(s). See description(s) below. NSN QTY Unit price 5180-00-293-2875 Approx 39 5180-00-293-2875 Ver.: 27 UI: KT TOOL KIT, CARPENTER'S The following header paragraph(s) shall apply to the item purchase description(s) where applicable. If there is a conflict between the item purchase description and the header paragraph(s), the header paragraph(s) shall take precedence over the item purchase description. Notwithstanding the requirements specified herein, cadmium plating is not acceptable. In the event no alternative coating, finish, or plating is specified, a rust preventative finish as used in standard commercial practice shall apply. When chromium plating or finish is specified and the manufacturer has a commercial coating of the same color and texture of chromium that the manufacturer uses in lieu of chromium; then the alternative coating can be used, provided the coating meets Aerospace Standard SAE AS4984. Each set or kit shall contain a dated parts list or packing list citing the GSA contract number (if applicable), GSA purchase order number, date of purchase order, kit national stock number (NSN), each component NSN (if applicable), kit noun name, each component noun name, and quantity of each component. Unless otherwise specified in the item purchase description, each kit or set and each component of the kit or set shall have, in addition to any other required marking, identification marking indicating the manufacturer's name or identifying symbol, and the state or country of manufacture. The marking shall be engraved, etched, or stamped in such a manner that it will be permanent to the extent that it will remain clear and legible throughout the life of the item. Workmanship: Details of workmanship shall be in accordance with the best commercial standards and practices. Paints, coatings, platings, and finishes shall be smooth, adherent, continuous, and not stained or discolored. Fasteners shall be firmly secured and show no evidence of deformation, cross threading, or hazardous burrs. Adhesives and lubricants adequate for their intended purpose shall be properly and neatly applied. Adhesives shall be adequately cured. Wires and cables shall be neatly dressed and shall not be frayed or in contact with sharp edges. Wire and cable insulation shall show no evidence of burns, abrading, or pinch marks. There shall be no interference, binding, or galling of parts. External and bearing surfaces shall be free of tool and gouge marks, nicks, or other surface imperfections. The item shall be clean and free of corrosion and debris (e.g. chips shavings, slivers) or other foreign material. The item shall be free from manufacturing workmanship defects (e.g., loose, missing, binding or misaligned parts, sharp or rough external edges, corners or surfaces) and material defects (e.g., pits, rips, fins, burrs, tears, nodules, cracks, blisters) which may adversely impact the item's serviceability, durability, safety, or appearance. DESCRIPTION Kit shall be in accordance with the Army Sets, Kits, and Outfits Component List Number SC5180-95-N08, LIN W34648. Last Review Date: 01 September 1999; Publication Date: 01 April 2010. End Item Description: Sets, Kits, and Outfits for Tool Kit, Carpenter's: Engineer Squad Additional Components: Staples 1 box of 5,000 staples compatible with the NSN 5120-00-889-1796 Tacker. Staple leg length is 3/8 inch. 1 box of 5,000 staples compatible with the NSN 5120-00-889-1796 Tacker. Staple leg length is 1/2 inch. Pencil Package Quantity: 12 Package Type: Box Hardness: Hard Marking Medium Type: nonindelible graphite lead Lead Cross-sectional Shape: rectangular Technical Characteristics: Pencils shall be wood cased with black lead 0.150 inches in diameter (minimum). The casing shall be oval or flat finished with bright colored lacquer. Leads shall be centered within the casing and securely bonded (glued) to the casing throughout the entire length. Lead shall be continuously smooth marking, make clearly visible lines, and not crumble or dust. The wood casing shall be straight, the two halves securely bonded (glued) throughout the entire length of the pencil and in conformance with normal commercial practice. When sharpened the wood casing shall not split, splinter or tear, shall present a smooth finish, and the lead shall not crumble or break. Pencils shall be marked with the manufacturer's name or trademark, and the color of the case shall be in accordance with normal commercial practice. Workmanship: Pencils shall be free from splits, splinter, blisters and any other imperfections which affect the appearance, might impair usage or present a hazard to the end user. Mouthpieces and point protectors shall be free from imperfections which affect the appearance, usefulness of these items or present a hazard to the end user. Blade, Sharpener, Chisel and Plane Threaded adjustable roller width: 2-5/8 inch Overall length: 9 inch See Technical Specifications paragraph(s): T4.1 and T6.1 List of Components of 5180-00-293-2875: 1. 8415-01-309-6641 Qty: 6 UI: EA APRON, CONSTRUCTION WORKER'S: DESCRIPTION The apron shall be a waist type with attached pockets. The pockets shall be made of heavy duty split leather. The apron shall have two large pockets plus a smaller pocket attached to the front of each large pocket. It shall have a minimum of six other smaller pockets, pouches or holders to accommodate pliers, punches, nail sets, pencils, and other small tools. There shall be two leather hammer loops and a center pocket between the large pockets for a 25 foot tape measure. The tops of the two large and two smaller pockets shall be rolled over to the outside of the pockets and stitched down. The apron pockets shall be stitched and rivet reinforced throughout. The apron shall have a 2 to 2-1/4 inch wide Army pistol type webbing belt capable of being adjusted to waist sizes of at least 32 inches to 48 inches. Klien Tools, Inc. part number 42242 or equal. Offering on: Manufacturer's Name: ______________________________ Brand __________________________________________ Model or Part No. __________________________________ Table of product attributes included? ( Y / N ) ___________ 2. 5120-00-965-0879 Qty: 1 UI: EA BAR, COMBINATION PRY DESCRIPTION Type III: Pry Bars Class 2: Die Setter Material: Steel Style: Claw Ends Legnth: 13 In. Min Blade Width: 1-11/16 In. Minimum at both ends Special Features: 3 Nail Slots, One at both ends and one in body of tool Stock: Flat Stock Purpose: For prying molding, scraping and pulling nails See Technical Specifications paragraph(s): TE.6, T1.9 3. 5110-00-277-4590 Qty: 1 UI: BD BLADE, HAND HACKSAW DESCRIPTION Hand Hacksaw Blade Type: flexible Length: 12 inch Number of Teeth: 18 per inch Material: composite blade, high speed steel 1 bundle shall contain 10 blades. See Technical Specifications paragraph(s): TE.6, T1.13 and T2.3 4. 5210-00-273-9793 Qty: 1 UI: EA CHALK LINE AND REEL DESCRIPTION Exception to CID A-A-2525: blue chalk powder is acceptable See Technical Specifications paragraph(s): T1.3 5. 5140-00-024-0332 Qty: 1 UI: EA CHEST, TOOL KIT DESCRIPTION IAW Department of The Army, Corps of Engineer's Drawing D-9151, Sheet 1, Revision D, dated January 31, 1964; Sheet 2, Revision B, dated September 6, 1962; Sheet 3, Revision C, dated January 31, 1964; Sheet 4, Revision C, dated September 6, 1962; Sheet 5, Revision C, dated September 6, 1962; and Sheet 6, Revision C, dated January 31, 1964. EXCEPTION TO DRAWING: The interior and exterior of the chests shall be finished by sealing, and then coated with Green 383 (color #34094) polyurethane conforming to MIL-C-46168 or MIL-C-53039 to minimum dry film thickness of 1.8 mils." Use Commercial Item Description A-A-55822 for items listed but not shown on drawing. See Technical Specifications paragraph(s): T2.2 6. 5110-00-449-6907 Qty: 1 UI: SE CHISEL, FIRMER SET DESCRIPTION In accordance with GSA Purchase Description 5110-449-6907 Dated July 3,2000. The set shall consist of: Design Blade Length Blade Width Chisel, Butt, Woodworking 2-1/2 inch 1-1/4 inch Chisel, Firmer 3 inch 1 inch Chisel, Firmer, Woodworking 3 inch 3/4 inch Chisel, Firmer, Woodworking 3 inch 1/2 inch Chisel, Firmer, Woodworking 3 inch 1/4 inch Chisel, Firmer, Woodworking 3 inch 1-1/2 inch List of Components of 5110-00-449-6907: 6.1. 5110-00-585-8430 Qty: 1 UI: EA CHISEL, BUTT, WOODWORKING DESCRIPTION Type II: Wood Used for general woodworking applications. Blade Length: 2-1/2" minimum. Blade Width: 1-1/4" minimum Striking End Type: Steel Cap Blade Attachment Method: Tang Handle Material: Plastic See Technical Specifications paragraph(s):, T1.10 6.2. 5110-00-640-5419 Qty: 1 UI: EA CHISEL, FIRMER DESCRIPTION Blade Length: 3". Blade Width: 1". Striking End Type: Leather Cap Blade Attachment Method: Tang Handle Material: Wood. In accordance with GSA Purchase Description 5110-00-449-6907 Dated 3 Jul 2000, Table I, Item # 4. See Technical Specifications paragraph(s): TE.6 6.3. 5110-00-640-5420 Qty: 1 UI: EA CHISEL, FIRMER, WOODWORKING DESCRIPTION Type: Chisel, Firmer Blade Length: 3.000 in. Blade Width: 0.750 in. Striking End Type: Leather Cap Blade Attachment Method: Tang Handle Material: Wood See Technical Specifications paragraph(s):, T1.10 6.4. 5110-00-640-5421 Qty: 1 UI: EA CHISEL, FIRMER, WOODWORKING DESCRIPTION In accordance with GSA Purchase Description 5110-00-449-6907, Dated July 3, 2000, Re: Table I, # 2. Type: chisel Class: firmer Style: bevel edge, wood handle Blade Length: 3.000 in. min. Blade Tip Width: 1/2 inch Blade Edge: beveled full length of blade Blade Material: high-grade tool steel, heat treated Blade Hardness: 55 to 63 HRC, not less than 1-1/2 inch from cutting edge Leather Cap: 3 layers of high-grade leather, totaling 3/8 inch, securely fastened to striking end of handle Consists: blade, hardwood handle having a leather cap 6.5. 5110-00-640-5422 Qty: 1 UI: EA CHISEL, FIRMER, WOODWORKING DESCRIPTION In accordance with GSA Purchase Description 5110-00-449-6907 Dated July 3, 2000. Re: Table I, # 1. Blade Length: 3.000 in. Blade Width: 1/4 in. Striking End Type: Leather cap Blade Attachment Method: Tang Handle Material: Plastic or wood 6.6. 5110-00-640-5423 Qty: 1 UI: EA CHISEL, FIRMER, WOODWORKING DESCRIPTION In accordance with GSA Purchase Description 5110-00-449-6907 Dated July 3, 2000 Table I, Item #6. Blade Length: 3.000 in. Blade Width: 1.500 in. Striking End Type: Leather cap Blade Attachment Method: Tang Handle Material: Plastic or wood See Technical Specifications paragraph(s): TE.6 End of 5110-00-449-6907 Components List _____________________________________________________ 7. 5120-00-293-2997 Qty: 2 UI: EA FACE, HAMMER, INSERTED DESCRIPTION Hammer Inserted Face Shall be plastic or similar material and have a threaded stud molded or otherwise permanently fastened into the base of the insert for attachment to the head. Steel studs shall be protected against corrosion by zinc plating and shall conform to Class 2B Unified or Class 2 American national threads. Face diameter: 2.00 inches nominal Type: Screw-in head Striking Face Shape: Convex Hardness designation: Tough Hardness color: Green Material: Plastic or similar material 8. 5110-00-203-4935 Qty: 1 UI: EA FILE, HAND DESCRIPTION Hand File Type III: Smooth-cut Length: 8 inches Face Cut Type: Double Cut, Smooth Edge Cut Type: Single Cut Smooth Style Designator: Flat Type See Technical Specifications paragraph(s): TE.6, T1.1 9. 5110-00-234-6539 Qty: 1 UI: EA FILE, HAND (AMERICAN PATTERN), FLAT DESCRIPTION Hand File Type: I (Bastard Cut) Heel to Point Length: 12 inch (+/- 0.125 in.) Face Cut Type: Double cut, Bastard Edge Cut Type: Single Cut, Bastard Style: Flat type See Technical Specifications paragraph(s): TE.6, T1.1 10. 5110-00-289-9657 Qty: 1 UI: EA FRAME, HAND HACKSAW DESCRIPTION Hand Hacksaw Frame The frame shall be designed with a thumb-nut-tension device for blade length adjustment. The frame shall be flat or round and provide for adjustable blade length of 10-12 inches. The depth from the teeth of the blade to nearest inside edge or projection of the frame shall be 3.0 inches minimum and 3-7/8 inches maximum. The minimum tension between the saw grips shall be 225 pounds. The frame shall be equipped with an open handle grip of hard rubber or plastic composition material. A friction washer shall be used between thumbnut and frame. The frame shall have a bright chromium or nickel plate finish on exterior surfaces, except the blade holders which may be bright zinc plated. The frame shall be free from imperfections which may affect its serviceability, durability or appearance. Contractor shall demonstrate in a test set-up that the saw frame is capable of being tensioned up to 225 pounds minimum without loss of serviceability. See Technical Specifications paragraph(s): TE.6 11. 4240-00-052-3776 Qty: 6 UI: PR GOGGLES, INDUSTRIAL: DESCRIPTION GOGGLES, INDUSTRIAL: Shall be in accordance with ANSI Z87.1 with the following characteristics: Direct Ventilation, Cover Style goggles Unit of issue - PR (Pair) PRODUCT CONFORMANCE: The products provided shall meet the salient characteristics of this Item Purchase Description, conform to the producer's own drawings, specifications, standards, and quality assurance practices, and be the same product offered for sale in the commercial market. The Government reserves the right to require proof of such conformance. See Technical Specifications paragraph(s): TE.6 12. 5120-01-112-8349 Qty: 3 UI: EA HAMMER, HAND DESCRIPTION Curved Claw Carpenter's Nail Hammer. Head weight: 20 ounces, +/- 2 ounces; Material: Steel Head; Steel Handle Overall length: 13-1/2 inches nominal See Technical Specifications paragraph(s): T1.8 13. 5120-01-112-8350 Qty: 3 UI: EA HAMMER, HAND DESCRIPTION Curved Claw Carpenter's Nail Hammer Head Weight: 16 ounces plus or minus 1-1/2 ounces. Head Material: Steel. Overall length: 13 inches plus or minus 1 inch Handle Material: Steel with cushioned grip. Grip may be leather, rubber, fiber, neoprene, vinyl, vinyl nylon, or other comparible material. See Technical Specifications paragraph(s): T1.8 14. 5120-00-900-6103 Qty: 1 UI: EA HAMMER, HAND DESCRIPTION Blacksmiths' or Engineers' Cross Peen Hammer Head Weight: 3 pounds, plus or minus 3 ounces Handle Material: Fiberglass Overall length: 16.00" (+/- 1/2") See Technical Specifications paragraph(s): T1.11 15. 5110-00-595-8325 Qty: 1 UI: EA HANDLE, FILE, WOOD DESCRIPTION File Handle The handle shall consist of a body containing jaws or chuck, and an actuating mechanism for securely gripping and holding the jaws during filing operation. Handle shall be shaped and proportioned to provide a comfortable grip. The handle shall be wood or high-impact plastic. Handles made of wood shall be of hardwood or any other wood normally used for file handles. Dimensions of handle with tang-holding device or jaws retracted into handle to lowest position shall be overall length 4 1/8 inches, commercial tolerance, and a minimum diameter of 1 inch at the largest portion of the body. The handle shall be fitted with tang-holding jaws or chuck extending axially into the handle body for a sufficient depth to provide adequate support and grip of the file during filing operation. The jaws shall be properly hardened to prevent deformation and wear under normal service conditions. Gripping surfaces may be notched or serrated to assure holding the file securely. Jaws for handles shall be steel; the ferrule and adjusting mechanism may be either die cast zinc based metal alloy, or 22-gauge steel. Each ferrule shall be securely impressed around the jaw end of the handle to prevent splitting of the wood or plastic. The tang mechanism for the handle shall be metal. The adjusting mechanism shall consist of a threaded metal sleeve or screw, and adjusting cap, which by tightening will exert the required pressure on the jaws and securely grip the file during filing operations. Screw threads shall be in accordance with applicable requirements of the National Bureau of Standards Handbook H28. The lengthwise movement of the adjusting mechanism shall cause contraction or expansion of the gripping portion of the jaws. Handles shall be smoothly finished. No cracks or splinters shall be visible. All metal portions shall be free from burrs and sharp edges. See Technical Specifications paragraph(s): TE.6 16. 5120-00-903-8553 Qty: 1 UI: EA HOLDER, INSERTED HAMMER FACE: DESCRIPTION Inserted Hammer Face Holder Holder: For two screw-in plastic hammer face inserts with threaded permanently attached studs. Design: Regular hammer Face Diameter: 2 inches (minimum) Weight: 2 pounds (+3, or -2 ounces) Head length: 2-1/2 inches (minimum) Handle Length: 13 inches (minimum) Handle Material: Hickory or fiberglass. Holder material: The head shall be of round cross-sectional shape, shall be of one-piece construction of Aluminum alloy or Zinc alloy, nonsparking and non-magnetic. Each end shall have a tapered recess and shall be drilled and tapped to receive the plastic insert. 17. 5110-00-240-7070 Qty: 1 UI: EA KNIFE, CRAFTSMAN'S (HAWKBILL) DESCRIPTION Craftsman's Knife Hawkbill-style knife for cutting linoleum, and floor tile made of rubber, plastic, vinyl or asphalt. The carbon steel blade shall have a hooked point and ground edge. The blade shall be rigidly secured in the hardwood handle, which has a metal ferule to prevent the wood from splitting. Blade Length: 2-1/2 inches Handle length: 5.0 inches See Technical Specifications paragraph(s): TE.6 18. 5210-00-239-0892 Qty: 1 UI: EA LEVEL AND PLUMB DESCRIPTION Level and Plumb This technical description covers twenty four (24) inch long nominal length carpenters' metal, side reading, fixed vial level and plumb. Salient Characteristics: Finish - Utile surfaces for metal parts shall have a surface roughness not to exceed 125 micro inches (arithmetical average) A.A. The spotting cavities, if present, shall be from 0.0002 to 0.0003 inch in depth with a concentration of 10 to 12 spotting cavities per square inch (P.S.I.) and a 20 to 40 percent bearing. Levels shall have no burrs, fins, sharp projections, excessive surface roughness, protruding end or cover plates, or any imperfections, which might impair their serviceability. Machined non-utile surfaces shall have a surface roughness not exceeding 250 micro inches A.A. Does not come with a carrying case. Stock - The stock for the metal, side reading, carpenter's levels and plumb shall be of aluminum alloy of a truss-type or modified channel type. The stock shall be designed to provide strength and rigidity. The stock shall be designed to prevent warping and to properly support vials & vial holders. End plates and vial protectors shall be solid aluminum, aluminum alloy, brass, or steel and shall be fitted so there will be no interference with utile surfaces. Hand grooves shall be of optimum depth. A handhold shall be in accordance with commercial manufacturer's standard practice. Vials - The level vial and plumb vials shall be fixed, firmly and permanently set in the stock of the level. The level shall have a twin level vial and two twin plumb vials. The vials shall be secured in the cavity of the frame in such a way as to be fixed and nonadjustable parts of the level assembly. The dimension tolerances for the 24 inch nominal length metal, side reading, carpenter's levels and plumbs are depth - 2-1/8 inches minimum and 2-5/8 inches maximum and, width - 1 inch minimum. The maximum weight is 2-1/4 pounds. The vials shall be mounted so that the bubble is clearly visible and shall be filled with a nonfreezing solution equivalent in viscosity to 25 percent ether or 50 percent alcohol. The liquid shall be either clear or amber colored and shall not discolor, cloud, or change in fluidity with age or at a temperature as low as -20 degrees F and as high as +150 degrees F. The liquid shall form a well-defined bubble of a size to lie just within the inside edge of the defining centering lines of the vial. Levels and plumb vials for carpenter's levels shall be commercial bent-glass tubes (or molded cylindrical acrylic) and shall be permanently marked with two black bubble-defining centering lines. The vial shall be bent to a radius of 7.645 inches minimum, equivalent to a vial sensitivity of 45 minutes maximum. The radius of curvature shall be uniform along the length of the vial body. Vial lenses - Vial lenses shall be of glass or plastic that will not scratch excessively or become marred or discolor during use. Lenses shall be firmly held in place and shall not become loose during normal use. Vial Holders - Vial holders shall be made of aluminum, aluminum alloy, zinc alloy, steel or plastic and mounted as to assure side reading. Steel parts shall be coated to prevent corrosion. Accuracy - Vial setting maximum 0.014 inch, concavity and parallelism maximum tolerance 0.010 inch. 19. 5210-00-223-9606 Qty: 2 UI: EA LEVEL, LINE DESCRIPTION Line levels shall consist of a fixed level vial and a stock with hooks for attaching to a line. Levels are used to establish a true horizontal plane. A line level is used in laying foundations, tile pipe, brick walls and determining grades. Size (Length): 3 inch Weight: 1/2 ounce, maximum Stock - shall be of brass, aluminum. or aluminum alloy. The bottom surface shall be smooth and flat, capable of being used as a utile surface. Stocks shall be provided with end plate hooks for attaching to the line. Hooks - shall be integral with the end plates and shall be sturdy enough to withstand rough handling and storage without deformation. Hooks shall be designed to prevent accidental detachment and positioned to suspend the level parallel to the line. Vial Lenses - shall be of glass or plastic that will not scratch excessively or become marred or discolor during use. Lenses shall be firmly help in place and shall not become loose during normal use. Vials - shall be mounted so that the bubble is clearly visible and shall be filled with a nonfreezing solution equivalent in viscosity to 25 percent ether or 50 percent alcohol. The liquid shall be either clear or amber colored and shall not discolor, cloud, or change in fluidity with age or at a temperature as low as -20 degrees F and +150 degrees F. The liquid shall form a well-defined bubble of a size to lie just within the inside edge of the defining lines of the vial. Levels and plumbs shall be commercial bent-glass tubes or a molded acrylic cylindrical vial, perfectly constant and concentric with an internal arc creating a vial with a cylindrical outside diameter and a barrel-shaped inside diameter and shall be permanently marked with two black bubble-defining centering lines. The vial shall be bent to a radius of 7.645 inches minimum, equivalent to a vial sensitivity of 45 minutes maximum. The radius of curvature shall be uniform along the length of the vial body. Vial Holders - shall be made of aluminum, aluminum alloy, zinc alloy, steel or plastic and mounted as to assure side reading. Steel parts shall be coated to prevent corrosion. Fixed Vial - shall be firmly and permanently set in the stock of the level. The vial shall be secured in the cavity of the frame in a fixed and nonadjustable manner in the level assembly. Tolerances - vial setting maximum.003 inch, concavity and parallelism maximum tolerance.005 inch. Accuracy - level of accuracy is the measure of the allowable deviation or tolerance on the level reading itself. It is determined by the setting of the vial within the stock as checked against a true horizontal or vertical plane within the above tolerances. Vial Sensitivity - measurement of vial sensitivity is the amount of angular movement in a vertical plane required to move the vial bubble 1/10 inch. Angular movement may be expressed in degrees, minutes, or seconds. The sensitivity of the bubble motion in the vial is determined by the vial radius; the larger the radius, the smaller the angle required to move the bubble 1/10 inch. 20. 5110-00-242-3057 Qty: 1 UI: EA PLANE, BENCH DESCRIPTION In accordance with GSA Purchase Description 5110-00-242-3057, dated 12/22/98. Class A: Size Number 9. Plane Smooth General Characteristics: Adjustable Cutter; 2 in. cutter width; 9 in. o/a lg. 21. 5120-00-223-7397 Qty: 2 UI: EA PLIERS, SLIP JOINT DESCRIPTION Type II: Slip joint, combination jaw Class 1: Straight nose Style A: Regular Size: 7.00 inches min. to 9.00 inches max. Features: Cushioned Grip Handles See Technical Specifications paragraph(s): TE.6, T1.6 22. 5120-00-239-8251 Qty: 1 UI: EA PLIERS DESCRIPTION Type I: Lineman's Class 1: Square head Overall Length: 8.00 inches (+/-1/2 inch) Cushion grip handles. See Technical Specifications paragraph(s): TE.6, T1.5 23. 5110-00-233-9722 Qty: 4 UI: EA RASP, HAND, WOOD DESCRIPTION Teeth Back: 11 per row Back Row: 8-2/3 per inch Teeth Flat: 10 per row Flat Row: 8-2/3 per inch Allowable Warpage: 4 Degrees maximum Largest Width: 1.188 in. Heel To Point Distance: 12.000 in. (+/- 0.125 in.) Largest Thickness: 0.438 in. Edge Cut Type: File Style: Half round wood See Technical Specifications paragraph(s): TE.6, T1.2 24. 5110-00-941-2707 Qty: 1 UI: EA RASP AND HANDLE DESCRIPTION Hand Rasp Rasp shall consist of metal alloy body with a knob and one plastic or hardwood handle and a replaceable blade (10 inches long). The body shall be 11-3/8 inches long by 1-1/4 inches wide. 25. 5110-00-293-3435 Qty: 2 UI: EA SAW, HAND, CROSSCUT: DESCRIPTION Type: Saw. Hand, Crosscut Blade Length: 26 inch Point Quantity: 8 per inch Back Shape: straight back Blade Butt Width: 5-3/4 inch wide Blade Point Width: 1-1/2 inch, 1/8 inch Blade: tapered ground to resist binding Features: stained hardwood handle; a protective sleeve for the blade See Technical Specifications paragraph(s): TE.6 26. 5110-00-142-5015 Qty: 1 UI: EA SAW, HAND, RIP DESCRIPTION Type: Saw, Hand Rip Blade Length: 26" Point Quantity: 8 per inch Back Shape: Skewed back or straight back Blade Butt Width: 6-1/2" Blade point width: 1-3/4" See Technical Specifications paragraph(s): TE.6 27. 5120-00-060-2004 Qty: 1 UI: EA SCREWDRIVER, CROSS TIP DESCRIPTION Type 1: Phillips (PH) Class 1: Plain Tip Size Designation: #0 Blade length 4 in. (+/- 1/4 in.) Material: Steel Blade, Plastic Handle See Technical Specifications paragraph(s): T1.7 28. 5120-00-234-8910 Qty: 1 UI: EA SCREWDRIVER, FLAT TIP DESCRIPTION Type II - General purpose, flared sides Exposed Blade Length: 6.000 inches Nominal Tip Thickness: 0.046 inches Tip Width: 0.312 inches Shank Shape: Round Material: Plastic, fluted handle Material: Steel See Technical Specifications paragraph(s): TE.6, T1.4 and T2.1 29. 5120-00-222-8852 Qty: 1 UI: EA SCREWDRIVER, FLAT TIP DESCRIPTION Type II: General Purpose, Flared Sides Overall Length: 8-27/32 inches Blade Length: 3-15/16 inches Blade Diameter: 1/4 inch Tip Thickness: 0.040 inch Material: Steel See Technical Specifications paragraph(s): TE.6, T1.4 30. 5120-00-236-2127 Qty: 1 UI: EA SCREWDRIVER, FLAT TIP DESCRIPTION Type I: Cabinet, Straight Sides (Plain) Exposed blade length: 3 inches, (+/-) 1/4 inch Tip width: 3/16 in. Tip thickness: 0.030 Shank Shape: Round See Technical Specifications paragraph(s): TE.6, T1.4 31. 5120-00-542-3438 Qty: 1 UI: EA SCREWDRIVER, CROSS TIP DESCRIPTION Type 1: Phillips Class 1: Plain Tip Size Designation: 2 Blade length: 8 inches (+/- 0.25) Material, Blade: Steel Material, Handle: Plastic Coating: Chrome See Technical Specifications paragraph(s): TE.6, T1.7 and T2.1 32. 5210-00-273-1948 Qty: 2 UI: EA SQUARE, CARPENTERS' DESCRIPTION This technical description covers a one piece carpenters, steel, parallel, 24 inch long square. Salient Characteristics: Carpenters' one-piece parallel steel square with a bright polished, polished and blued, or equal corrosion-resistant chemical finish. Parallel squares shall have tongues (blades)and bodies (beams) of equal thickness throughout. The square shall be of one-piece construction and shall consist of a body (beam) and tongue (blade). The edges shall be straight and parallel within 0.004 inch per each 12-inch length. The face and back shall be flat. Size and Tolerances. Length of body (beam) along the outside edge shall be 24 inch. Length of tongue (blade) along outside edge shall be 16 inch. Width of body (beam) shall be 2 inch, plus or minus 1/32 inch. Width of tongue (blade) shall be 1-1/2 inch, plus or minus 1/32 inch. Thickness of tongue (blade) and body (beam) shall be a minimum of 0.088 inch and a maximum of 0.100 inch. Graduation Lines & Style. Graduation lines shall be of uniform width and depth. The edges of graduation lines shall be sharp, straight, legible, and permanent. The maximum variation in width between like types of graduations and in the individual graduation shall be such that the maximum width shall not exceed the minimum width by more than 35 percent of the minimum width. Graduations shall extend to the reading edge. Graduations and figures shall be etched, machine cut, or embossed to a minimum depth of 0.0004 inch. Each figure shall be sunk below the plane of the face on which it appears. Inch and increment lines shall be from 0.008 to 0.020 inch in width. Graduations and figures shall conform to the following; Face body (beam) and tongue (blade) 1/16, 1/8 inches, Back body (beam) 1/12, 1/16 inch, back tongue (blade) 1/10, 1/12 inch. Tables, scales, and measures; Brace table, Octagon scale, Essex board measure, 100th scale. Inch Marking. Each inch of each edge of both faces (face and back) shall be marked to show the number of inches. The square shall have a reverse reading scale in the center of the face of the body unless a rafting table is required. Squareness Accuracy. The out-of-square error of either edge of the tongue with either edge of the body shall not exceed 0.006 inch per foot. Scale Accuracy. The accumulated error of graduation lines shall not exceed 1/32 per 12 inch. Instructions. A booklet shall be furnished with the square giving complete instructions and directions. 33. 5210-00-241-3599 Qty: 2 UI: EA SQUARE, CARPENTERS, STEEL; COMBINATION TRY & MITER DESCRIPTION Carpenters' Square, Steel; Combination Try & Miter Type: Carpenters', steel, combination try and miter Blade Length: 12 inch Blade Width: 15/16 inch, minimum, 1-1/8 inch, maximum Thickness of Blade: 0.070 inch, minimum, 0.095 inch, maximum Length of Head: 4 inch, minimum, 5 inch, maximum Graduations: Front face, one edge - 8ths, 16ths on the other edge; on the other face, one edge -16ths, 32nds on the other edge. Components: a blade, clampable square and miter head with one or more level glasses, a blade clamping device, and a scriber. Component parts which are fabricated of forged steel or cast iron shall have a durable dark colored, smooth, or rippled enamel finish on surfaces that are not machined or polished. Blade: The blade shall be made of steel or stainless steel, of uniform thickness with a flatness of 0.010 total indicated variation (TIV). The blade shall have a minimum hardness of 90 on the Rockwell B scale. Steel blades shall be nickel, chrome plated, blued or black oxide. Edges and faces shall be straight and parallel within 0.004 inch per each 12 inch length. A full groove along the center of one face shall be provided for engagement with the clamping device on the head. Graduations and Figures: Graduation lines shall be of uniform width and depth. Graduations and figures shall have a finish, which will make it possible for each accurate reading. The edges of graduation lines shall be sharp, straight, legible, and permanent. Graduations and figures shall be etched, machine cut, or stamped to a minimum of 0.002 inch. Inch lines shall be from 0.008 to 0.022 inch in width, whereas increment lines shall be from 0.008 to 0.020 inch in width. The accumulated error of graduations shall not exceed 0.004 inch in any one inch, or a total of 1/32 inch in 12 inches. Figures on the grooved face shall read consecutively in inches over the total length of the blade with figures of each edge reading in the opposite direction. Each figure shall be sunk below the plane of the face on which it appears. Figures shall be clear, distinct, and permanent. The subdivisions shall be marked with the proper figures at the corresponding inches; corners of each graduated edge of each face shall be marked to show the smallest fractional subdivision to which it is graduated. The maximum variation in width between like types of graduations and in the individual graduation shall be such that the maximum width shall not exceed the minimum width by more than 35 percent of the minimum width. Graduations shall extend to the reading edge. Head: The head shall be made of steel or a fine grained, seasoned gray iron or zinc casting, of uniform quality, free from blow holes, porosity, hard spots, or other detrimental defects. There shall be a slot for insertion of the blade. The clamping device shall have a substantial knurled thumbscrew or thumbnut suitable for rigidly clamping the head at any point of the blade without play in any direction. The locking device shall be parallel with the square face of the head. Level Glasses: Level glasses shall be constructed of substantial glass or plastic tubing formed with permanent and distinguishable black bubble defining lines, suitable for properly centering the bubble. Level glasses shall be permanently secured to the head and enclosed by a metal housing in a manner so that the portion necessary for observing the bubble portion is exposed. The liquid in the level shall be either clear, light blue or amber colored, at the option of the manufacturer. The level vial shall have a vial sensitivity not to exceed 50 minutes and shall be set in the square head parallel to the base within 0.012 inch per foot. Individual movable parts of identical models of squares made by the same manufacturer shall be interchangeable and within the accuracy stated above without the need of any alteration, refitting, or adjustment. Squareness: The out-of-square error of the head with either edge of the blade shall not exceed 0.001 inch per inch of extended blade when measured at the end of the blade. The out-of-square error of the face shall not exceed a total of 1/16 inch in 12 inches. Miter: The out-of-miter error of the head with either edge of blade shall not exceed 0.012 inch, measured at either end of the blade. Packaged wrapped in an anti-corrosive wax paper, in a corrugated box. No special case provided. Products Engineering part number PEC7110; Empire Level Part Number E250 or equal. Offering on: Manufacturer's Name: ______________________________ Brand __________________________________________ Model or Part No. __________________________________ Table of product attributes included? ( Y / N ) ___________ 34. 5345-00-260-0759 Qty: 1 UI: PG STONE, SHARPENING: DESCRIPTION STONE SHARPENING: Shall conform with the listed salient characteristics and manufactured in accordance with the following ANSI and ASTM Industry Specifications: Type - Un-mounted, oil impregnated Class - Artificial (aluminum oxide) Style - Rectangular, combination Grit - Fine (280-320) & Coarse (90-120) as stated herein Length (A) - 8 inches (nominal) Width (B) - 2 inches (nominal) Thickness (C)- 1 inch (nominal) Unit of issue - PG (10 stones per package) ANSI B74.12 - Specifications For The Size of Abrasive Grain-Grinding Wheels, Polishing and General Industrial Uses ANSI B74.18 - Specifications For Grading of Certain Abrasive On Coated Abrasive Products Application for copies of ANSI standards should be addressed to the American National Standards Institute, 1430 Broadway, New York, NY 10018. ASTM E 29 - Standard Practice For Using Digits In Test Data To Determine Conformance With Specifications Application for copies of ASTM standards should be addressed to ASTM, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959. The documents/specifications referenced in this purchase description shall be the issues in effect on the date of issuance of the invitation for bids or request for proposals. In the event of a conflict between this purchase description and a document referenced herein, this purchase description shall take precedence. ABRASIVE GRADING: This stone shall be a comprised of not less than 50% coarse grit and not less than 42% fine grit, in accordance with the requirements of ANSI B74.12 and ANSI B74.18 respectively. ABRASIVE BOND/CONTENT: The two grits shall be bonded together either by a vitrified process or with a non-water soluble and oil resistant adhesive. The minimum abrasive content shall be 65% and the maximum abrasive content shall be 85%. Durability: The sharpening stones shall possess sufficient strength and bonding to withstand normal service without chipping or breaking and provide good sharpening qualities. PRODUCT CONFORMANCE. The products provided shall meet the salient characteristics of this description, conform to the producer's own drawings, standards, and quality assurance practices and be the same product offered for sale in the commercial market. The Government reserves the right to require proof of such conformance. DATA SUBMISSION: The material safety data sheet (MSDS) shall be submitted in accordance with the latest revision of Federal Standard No. 313. For shipments to GSA distribution centers or Customer Supply Centers, the contractor shall provide one copy of the MSDS inside or affixed to the outside of each transport package (as defined in paragraph 1 of FED-STD-123), if affixed outside, the MSDS must be placed in a weather-resistant envelope. 35. 5120-00-889-1796 Qty: 1 UI: EA TACKER, STAPLE DESCRIPTION Tacker, Staple A hand held and single hand manually operated compression/squeeze type tacker (without base) designed to drive heavy duty preformed staples to penetrate cloth, composition board, or wood (frequently used to staple materials to walls). The operating handle shall automatically return to its starting position after each staple is driven. A staple feeding mechanism automatically feeds each staple beneath a plunger until the last staple on the cemented strip is used. Tacker Type: heavy duty Tacker Style: gun Staple Holding Capacity: 84 minimum Staple Type: heavy duty Staple Shape: flat top Staple Width: 1/2 inch Wire gage: 0.050 (heavy duty staples) Staple Leg Lengths: 1/4, 5/16, 3/8, and 1/2 inch DUO FAST Model CS5000 or equal Offering on: Manufacturer's Name: ______________________________ Brand __________________________________________ Model or Part No. __________________________________ Table of product attributes included? ( Y / N ) ___________ 36. 5210-00-527-9429 Qty: 1 UI: EA TAPE, MEASURING DESCRIPTION Measuring Tape The tape shall have a vinyl covered welded steel case treated to prevent rust. The tape shall be equipped with a handle that will fold against the reel. The 3/8 inch wide blade shall be made of steel and have a measuring range of 100 feet/30 meters in Metric and English graduations. The blade shall be yellow with red and black markings. The graduations shall be in feet, inches, and eighths on one side. The reverse side shall be graduated in centimeters with a minimum of the first decimeter in millimeters. Reading direction shall be right to left, left to right and vertically. The blade shall have a folding steel end hook. Each case shall be marked with the overall length of the tape. 37. 5210-01-139-7444 Qty: 6 UI: EA TAPE, MEASURING DESCRIPTION Measuring Tape Type: Steel, Self supporting Class: Butt-end case Style: Automatic Winding Tape Material: spring tempered steel Finish: tape - yellow enamel, both sides; figures and graduations - black enamel; mylar coated Design Type: General purpose distance measuring Graduation Units: inch and feet Smallest Graduation Unit: 1/16 inch Measuring Capacity: 25 feet Tape Width: 1 inch, 1/64 inch Tape Thickness: 0.0045 inch Collapsing Capability: tape supports itself when extending horizontally 42 inch Enclose Type: case, impact resistant plastic Reading Direction: Left to Right Accuracy: scale error of any graduated edge having inch graduations shall not exceed 1/32 inch Special Features: replaceable tape, flat surface metal hook, blade lock, belt clip, first 6 inch shall be graduated in 1/32 inch, 16 inch and 19.2 inch stud marking 38. 4020-00-954-1118 Qty: 1 UI: TU TWINE, FIBROUS: DESCRIPTION In accordance with Military Specification MIL-T-713E dated 14 June 1977 and Notice 1 dated 22 April 1989; TWINE, FIBROUS PLY QUANTITY: ANY ACCEPTABLE FABRICATION METHOD: TWISTED COATING MATERIAL: WAX ENVIRONMENTAL PROTECTION: MILDEW RESISTANT BREAKING STRENGTH: 70.0 POUNDS MINIMUM MATERIAL AND LOCATION: POLYAMIDE NYLON, MIL-T-713, TYPE P, CLASS 1 ISSUE FORM: TUBE LENGTH PER WEIGHT: 650.000 FEET PER POUND MINIMUM ISSUE FORM WEIGHT: 1.0 POUNDS MINIMUM COLOR: NATURAL 39. 5120-00-264-3796 Qty: 2 UI: EA WRENCH, ADJUSTABLE DESCRIPTION Type 1: Standard Openings Jaw Capacity: 1-1/16 Length: 12.00 inch Material: Steel Coating: Chrome See Technical Specifications paragraph(s): TE.6, T1.12 and T2.1 End of 5180-00-293-2875 Components List _______________________________________________________________ TECHNICAL SPECIFICATIONS TECHNICAL DOCUMENT T1.1 In accordance with Commercial Item Description A-A-2311A, October 8, 2002. Applies to item(s): 8 and 9 T1.2 In accordance with Commercial Item Description A-A-2329, dated September 27,1985. Applies to item(s): 23 T1.3 In accordance with Commercial Item Description A-A-2525A, dated May 16, 2002. Applies to item(s): 4 T1.4 In accordance with American Society of Mechanical Engineers (ASME) B107.15 as contained in ASME B107.600-2008; this document incorporates and includes the revisions of primary standard B107.15, B107.26, B107.30, and B107.31 Applies to item(s): 28, 29 and 30 T1.5 In accordance with American Society of Mechanical Engineers (ASME) B107.20 as contained in ASME B107.500-2010; this document incorporates and includes the revisions of primary standard B107.11, B107.13, B107.16, B107.18, B107.19, B107.20, B107.22, B107.23, B107.24, B107.25, B107.27 and B107.37. Applies to item(s): 22 T1.6 In accordance with American Society of Mechanical Engineers (ASME) B107.23 as contained in ASME B107.500-2010; this document incorporates and includes the revisions of primary standard B107.11, B107.13, B107.16, B107.18, B107.19, B107.20, B107.22, B107.23, B107.24, B107.25, B107.27 and B107.37. Applies to item(s): 21 T1.7 In accordance with American Society of Mechanical Engineers (ASME) B107.15 as contained in ASME B107.600-2008; this document incorporates and includes the revisions of primary standard B107.15, B107.26, B107.30, and B107.31 Applies to item(s): 27 and 31 T1.8 In accordance with ASME B107.400-2008, Striking Tools, Incorporating ASME B107.41, ASME B 107.42, ASME B107.53, ASME B107.54, ASME B107.56, ASME B107.57, and ASME B107.58 Applies to item(s): 12 and 13 T1.9 In Accordance with the American Society of Mechanical Engineers (ASME) B107.410-2008. Applies to item(s): 2 T1.10 In accordance with American Society of Mechanical Engineers (ASME) B107.44 Chisels Glaziers, Wood, Ripping, Flooring/Electricians as contained in ASME B107.410-2008; this document incorporates and includes the revisions of primary standard B107.43, B107.44, B107.46, B107.48, B107.49, B107.50, B107.52 and B107.59 Applies to item(s): 6.1 and 6.3 T1.11 In accordance with The American Society of Mechanical Engineers (ASME) B107.54, 2001. Applies to item(s): 14 T1.12 In accordance with American Society of Mechanical Engineers (ASME) B107.8 as contained in ASME B107.100-2010; this document incorporates and includes the revisions of primary standard B107.6, B107.8, B107.9, B107.21, B107.39, B107.40, and B107.66. Applies to item(s): 39 T1.13 In accordance with American Society of Mechanical Engineers (ASME) B94.52M-1999. Applies to item(s): 3 EXCEPTION(S) TO TECHNICAL DOCUMENT T2.1 Coatings: Shall be in accordance with SAE AS4984-2011; Coating Requirements for Aerospace Hand Tools. Applies to item(s) : 28, 31 and 39 T2.2 Mark each tool in a permanent and legible manner with drawing number, manufacturer's name or identifying symbol, and country of origin Applies to item(s) : 5 T2.3 Bi-metal blades can be furnished for the flexible blades. The cutting edge of the bi-metal blade shall be constructed of high speed steel. The back shall be constructed of carbon steel. Applies to item(s) : 3 PACKAGING T4.1 Preservation/Packing: Each tool kit shall be packed in a close fitting fiberboard box that will offer protection during shipping, handling, storage and redistribution. The packed tool kit shall be marked in accordance with standard commercial practice. Shipping Container: Each kit shall be packed as stated above and the quantity of kits packaged per shipping container shall be uniform. The shipping container shall be packed in a close fitting fiberboard box in compliance with the Uniform Freight Classification and the National Motor Freight Classification requirements of Rules, Item 222, Sec. 3., Minimum 200 or ECT 32. Applies to item(s) : main kit/set MARKING T6.1 All unit, intermediate, transport packages and unit loads shall be marked and bar coded for delivery to the GSA DEPOT and MILITARY ACTIVITIES shall be in accordance with the latest version of MIL-STD-129, "Military Marking For Shipment and Storage". "Latest version" is defined as the version in effect on the date of bid submittal. Federal Standards and Military Standards can be accessed on-line via the Defense Logistics Agency's "Assist" Quicksearch web site: http://assist.daps.dla.mil/quicksearch/ NOTICE: All Pallets transported / Shipped to the GSA Depot MUST be HEAT TREATED and marked IAW IIPC Palletization: The shipping (transport) containers shall be palletized. The pallets shall be 48-inch length x 40-inch width, general purpose, four-way entry, flush stringer, and double-face non-reversible pallets. The palletized load shall not exceed 2500 pounds in weight for shipments to the Eastern Distribution Center (Burlington). The palletized load shall not exceed 2000 pounds in weight for shipments to the Western Distribution Center (French Camp Location). The palletized load shall not overhang the pallet deck board edge by more than 1 inch and shall not exceed 53 inches in overall height (including pallet). Less than half pallet loads or loads shipped by small package carrier in acceptable transport packing need not be palletized. When less than full but more than a half pallet is used, the palletized load shall utilize proper bracing and/or reinforcement to ensure that the load can withstand two additional loads placed on it. Stacking: A load-stacking test shall be performed once, at the beginning of the contract, for each different unitized or palletized load configuration. A fully palletized load shall be tested utilizing a total stack of three palletized loads, with all the proper bracing and/or reinforcement necessary to perform the test. There shall be no evidence of damage to the pallets, shipping containers or products when stack is tested on the rigid surface for a minimum of 24 hours, in compliance with all the National and Local Safety Regulations. The pre-tested palletized load configuration shall be duplicated using the same packaging materials, pattern, number of shipping (transport) containers, and procedures consistent throughout the duration of the contract. Palletized loads shall be stable and safe when handled with mechanical equipment by qualified personnel. Materials: All lumber used inside or outside a shipment shall be bark free. No used wood pallets with repaired components or stringers will be acceptable. All wood pallet stringers shall be manufactured from hardwoods. Pallets manufactured of materials other than wood, shall conform to all the requirements specified herein. Unitization: For the purpose of this requirement, the assembled group of containers or items in a single load that can be handled as a unit throughout the distribution system. Unitization encompasses, but is not limited to, consolidation in a container, placement on a pallet or load base having forklift capability, or securely binding together. Shipments should be considered for unitization where appropriate or specified. Unitization of pallet load: The palletized load shall be unitized and secured to the pallet to insure that the load arrives intact without product damage. The containers or items shall be placed in a suitable pattern to form a stable and balanced load. Vertical, horizontal or filler reinforcement shall be added as necessary to meet the stacking strength requirements. A palletized load shall be secured to the pallet by shrink or stretch wrapping, and/or, by steel or nonmetallic strapping. When steel or nonmetallic strapping is used, edge protectors shall be provided to prevent damage to the cartons when tensioning the strapping. As a minimum, two straps shall run lengthwise, two straps shall run widthwise, and two straps shall run around the girth of the palletized load. A palletized load shall be capable of protecting the products against damage in a multiple handling, transportation, and storage environment having distribution warehouses with rack systems that support the load/s overhead of warehouse personnel. Notice of special requirements for shipment to all countries, GSA Depots and DLA Consolidated Shipping Points that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published Guidelines for Regulating Wood Packaging Material in International Trade. Countries endorsing the IPPC Guidelines are found at the website given below. General Services Administration Acquisition Manual (GSAM) Clause 552.211-89 requires non-manufactured wood pallets and other non-manufactured wood packaging material used to pack items for delivery to or through IPPC countries be marked and properly treated in accordance with IPPC guidelines. Pallets and packing material shipped to FAS distribution facilities designated for possible delivery to the countries endorsing the IPPC Guidelines will comply with DLAD 47.305-1, and MIL-STD-2073-1. http://www.aphis.usda.gov/import_export/plants/plant_exports/wpm/country/index.shtml UNIT PACKAGES: The unit packages shall be packed in a close fitting fiberboard box in compliance with the Uniform Freight Classification and the National Motor Freight Classification requirements of Rules, Item 222, Sec. 3., Minimum 200 psi, or Edge Crush Test (ECT) 32 Lbs. per Inch Width. Applies to item(s) : main kit/set ENVIRONMENTAL FIELDS TE.6. PRIME Packaging for this product is compliant with the U.S. Navy "Plastics Removal in the Marine Environment (PRIME)" program which calls for non-plastic packaging, packing, and associated marking requirements. The definition of plastic shall be in accordance with that given in ASTM D883-00, "Standard Terminology Related to Plastics". Applies to item(s): 2, 3, 6.2, 6.6, 8, 9, 10, 11, 15, 17, 21, 22, 23, 25, 26, 28, 29, 30, 31 and 39
Web Link: FBO.gov Permalink
(https://www.fbo.gov/notices/75f5574fa0e67e49ec385a24deb05bb2)
Record: SN02816514-W 20120728/120727000046-75f5574fa0e67e49ec385a24deb05bb2 (fbodaily.com)
Source: FedBizOpps Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's FBO Daily Index Page |

Loren Data's SAM Daily™

51 -- RFQ-5180-00-293-2875 - RFQ