SOLICITATION NOTICE
28 -- DISK,COMPRESSOR,AIR
- Notice Date
- 6/29/2012
- Notice Type
- Cancellation
- NAICS
- 336412
— Aircraft Engine and Engine Parts Manufacturing
- Contracting Office
- DLA AVIATION AT OKLAHOMA CITY, OK; DLR PROCUREMENT OPERATIONS(AO);3001 STAFF DRIVE; TINKER AFB; OK; 73145
- ZIP Code
- 73145
- Solicitation Number
- SPRTA1-12-R-0402
- Response Due
- 8/16/2012
- Point of Contact
- Kathy Travis, Phone 405-734-8127, Fax - -, Emailkathy.j.travis@tinker.af.mil
- E-Mail Address
-
Kathy Travis
(kathy.j.travis@tinker.af.mil)
- Small Business Set-Aside
- N/A
- Description
- Synopsis FD2030-12-70497 - COMPRESSOR DISK APPLICABLE TO THE TF33 ENGINE - AMC CODE 3V - SOLE SOURCE - UNITED TECHNOLOGIES CORP dba PRATT & WHITNEY, CAGE 52661 ; 1. Estimated solicitation issue date 16 Jul 2012 ; estimated solicitation response date 16 Aug 2012 ; 2. RFP #: SPRTA1-12-R-0402 ; 3. PR#: FD2030-12-70497 ; 4. Nomenclature/Noun: DISK, COMPRESSOR, AIR ; 5. NSN: 2840-00-966-3021RV ; 6. PN: 482402 ; 7. Application (Engine or Aircraft): TF33 Engine ; 8. AMC: 3V ; 9. History: 13 JUL 2011, SPRTA1-11-C-0083 for a quantity of 475 each, ADCHEM MANUFACTURING TECHNOLOGIES, INC., Cage 0JWE8 ; 10. Description/Function: The convergent seal liner protects the convergent seal from high temperature exhaust gases ; 11. Dimensions: 13.5000" (L) x 4.5000" (W) x 1.5000" (H) and weighs 2.2000 (LBs) ; 12. Material: Columbium Alloy 13. Qualified Sources: TOTAL SMALL BUSINESS SET-ASIDE - ADCHEM MANUFACTURING TECHNOLOGIES, INC CAGE 0JW38, AGC INC. CAGE 98500 ; 14. Qualification Requirements: Are applicable - This is a Critical Safety Item and MQR-1, Rev E and Engineering Instruction EIM-1 for CSI & CAI Parts Rev E applies. The part requires engineering source approval by design control activity in order to maintain the quality of the part. Existing unique design capability, engineering skills, and manufacturing knowledge by the qualified sources require acquisition of the part from the approved sources. An alternate source must qualify in accordance with the design control activity procedures, as approved by the cognizant government engineering activity ; 15. First Article: Applicable - This is a critical part used in the F100 series turbine engine. Poor quality parts will have an adverse effect on mission capability and system safety. For this reason, First Article Testing is required to insure first time manufacturers or manufactures that have not produced the item within three years, manufacture parts in accordance with the drawing and specification requirements. ; 16. Export Control: Applicable ; 17. Award Type: Firm Fixed-Price Fixed-Quantity FFP/FQ ; 18. Total Line Item(s) Quantity: L/I 0001 - 523 each ; L/I 0002 - 5 each ; L/I 0003 - 3 EACH ; L/I 0004 - 2 EACH FIRST ARTICLE UNITS TO BE PART OF PRODUCTION QTY UPON FA APPROVAL ; L/I 0005 1 EA - FIRST ARTICLE TO BE EXPENDED ; L/I 0006 - FIRST ARTICLE TEST PLAN DATA ; L/I 0007 - FIRST ARTICLE TEST REPORT DATA ; 19. Required Delivery: All units request delivery on or before 30 Aug 2013 - Destination: FMS Countries ; 20. Mandatory Language: In accordance with FAR 6.302-1, all responsible sources may submit a bid, proposal, or quotation which shall be considered by the agency. This acquisition involves technology that has a military or space application. The extent of foreign participations has not yet been determined. Nothing in this notice contradicts other restrictions identified in the synopsis notice or solicitation regarding eligible sources. This is a small business set aside, therefore foreign sources may not participate as potential prime contractor but could, if otherwise eligible, participate as subcontractors. Based upon market research the Government is not using the policies contained in FAR 12, Acquisition of Commercial Items in its solicitation for the described supplies or services. However, interested persons may identify to the contracting officer their interest and capability to satisfy the Governments requirement with a commercial item within 15 days of this notice. Government's obligation under this contract is contingent upon the availability of appropriated funds from which payment for contract purposes can be made. No legal liability on the part of the Government for any payment may arise until funds are made available to the Contracting Officer for this contract and until the Contractor receives notice of such availability to be confirmed in writing by the Contracting Officer. Electronic procedures will be used for this solicitation. Hard copies of the solicitation will not be sent from this office. The solicitation will be available for download only at www.fbo.gov. Authority: 10 U.S.C. 2304(c)(1), Justification: Supplies or Services required are available from only one or a limited number of responsible source(s) and no other type of supplies or services will satisfy agency requirements. The proposed contract action is for supplies and services for which the Government intends to solicit and negotiate with only one or a limited number of sources under the authority of FAR 6.302. This notice of intent is not a request for competition. However, all proposals received within 45 days (30 days if award is issued under an existing basic ordering agreement) after date of publication of this synopsis will be considered by the Government. A determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. It is suggested that small business firms or others interested in subcontracting opportunities in connection with the described procurement make contact with the firm(s) listed. Note: While price will be a significant factor in the evaluation of offers, the final contract award may be based on a combination of price, technical capability, and past performances detailed in the solicitation. Award will be made only if the offeror, the product/service, or the manufacturer meets qualification requirements at the time of award in accordance with FAR 52.209-1. AWARD WILL NOT BE WITHHELD AWAITING QUALFICATION. For qualification information/source approval request contact Thomas Barron, DLA-Aviation/AOB at extension (405) 739-9632. Written procedure will be used for this solicitation. No telephone requests. Only written or faxed requests received directly from the requestors are acceptable. Note: An Ombudsman has been appointed to hear concerns from Offerors or potential Offerors during the proposal development phase of this acquisition. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. The Competition Advocate (CA) at each contracting activity/office (as defined in DLAD 2.101) shall act as the ombudsman and attempt to resolve contractor complaints. DLA AVIATION - AOB's CA/ombudsman can be reached at (405) 734-8241, facsimile (405) 734-8129. Complaints which cannot be so resolved shall be forwarded to the HQ through J-72 for resolution by the DLA competition advocate. Each activity is responsible for developing procedures for executing the duties and responsibilities of its local. ; 21. UID: If unit price exceeds $5,000.00 then UID requirements will apply. 22. Small Business Set-Aside: Applicable 23. Point of contact: DLA-Aviation/AOAC, Kathy Travis @ Kathy.j.travis@tinker.af.mil ; PR Number(s): FD20301270497 ; Item: 0001 ; NSN: 2840009663021RV DISK,COMPRESSOR,AIR ; P/N: 482402, ; Description: Length 16.0000,Width 3.7750,Height 16.0000 other dimensions Outside diameter has 90 each holes for retention of 30 Compressors Blades manufacturing dimensions are critical snap diameters are close tolerance to meet stringent balance and fit limits. Tf33-100A Engines. Item material PWA 1215 Titanium, Item function 2nd stage blades which direct air flow passing thru the Inlet Fan Assembly. ; Quantity: 30.0000 EA ; Destn: SW3211,TINKER AFB,OK,73145-8000. ; Delivery: 31 MAR 2014 Monthly Beginning, 5.00 ; PR Number(s): FD20301270497 ; Item: 0002 ; CEMS TRACKING DATA ; Quantity: 1.0000 LO ; Destn: DD1423,,, -. Delivery: TBC To be cited on individual orders issued hereunder, 1.00 LO Electronic procedure will be used for this solicitation. ; To: UNITED TECHNOLOGIES CORPORATION, EAST HARTFORD, CT.,06108-0968. ;
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/AFMC/OCALCCC/SPRTA1-12-R-0402/listing.html)
- Record
- SN02790303-W 20120701/120629234643-0423d64a3c580378d7cb8de55f95c5d0 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |