SOLICITATION NOTICE
Z -- Repair/Replace Two Gates at Niscemi, Sicily, Italy
- Notice Date
- 6/11/2012
- Notice Type
- Presolicitation
- NAICS
- 332323
— Ornamental and Architectural Metal Work Manufacturing
- Contracting Office
- N33191 NAVFAC EURSWA FEAD SIGONELLA PSC 812 BOX 3000 FPO AE CATANIA,
- ZIP Code
- 00000
- Solicitation Number
- N3319112T0020
- Response Due
- 6/25/2012
- Archive Date
- 7/25/2012
- Point of Contact
- Robert LeBlanc 01139095862291 Mark Gelsinger
- E-Mail Address
-
<!--
- Small Business Set-Aside
- N/A
- Description
- This is not a request for either a quote or proposal, or an invitation for bid. The intent of this pre-solicitation synopsis is to identify potential offerors to furnish and erect two leaf cantilevered sliding gate to allow motorized operation of the gate(s) by pressing the appropriate pushbuttons on the control console at Bldg 2100, Niscemi, Sicily, Italy by means of a firm fixed price construction contract. All contractors proposing on Department of Defense solicitations must be registered in the Central Contractor Registration (CCR) prior to award of the contract. The requirements will be procured utilizing Federal Acquisition Regulation (FAR) Part 13 Simplified Acquisition Procedures. The North American Industry Classification System (NAICS) code is 332323. The estimated price range is ‚¬18,727.50 - ‚¬74,910.00. The anticipated requirement includes, but is not limited to, all labor, material, and equipment for furnishing and erecting two leaf cantilevered sliding gate to allow motorized operation of the gate(s) by pressing the appropriate pushbuttons on the control console at Bldg 2100. The Contractor shall remove all electrical devices currently installed in the gate area and in the control area of Bldg and provide new electrical gate system. Each gate shall have a clear gate opening height of 2.05 M with outrigger double barbed wire extension of 45 cm (three strands of barbed wire, uniformly spaced, shall be attached by bands, clips or eyebolts) and the clear gate opening width shall be 6.30 M. The Contractor shall verify field measures. Gate track shall be keyed to interlock into gate frame member (providing 200% additional strength when compared to weld only keyless systems). When interlocked with and welded to the "keyed" frame top member, gate track forms a composite structure. Gate shall have a minimum counterbalance length of 50% opening width which provides a 36% increase in lateral resistance (when compared to ASTM minimum of 40% counterbalance). The gate is to be automated, therefore counterbalance section shall be filled with fabric or other specified material. To provide superior structural integrity, intermediate vertical members shall be used - with spacing between verticals to be less than 50% of the gate frame height. Entire gate frame (including counterbalance section) shall include 2 adjustable stainless steel cables per bay to allow complete gate frame adjustment (maintaining strongest structural square and level orientation). Gate truck assemblies shall be tested for continuous duty and shall have precision ground and hardened components. Bearings shall be pre-lubricated and contain shock resistant outer races and captured seals. Gate truck assemblies shall be supported by a plated steel bolt with self aligning capability, rated to support a reaction load. Hanger brackets shall be hot dipped galvanized steel with a minimum 10 mm. thickness that is also gusseted for additional strength. Gate top track and supporting hangar bracket assemblies shall be certified by a licensed professional engineer to withstand a 900 Kg. vertical reaction load without exceeding allowable stresses. All work shall be performed in accordance with the most current version of the Army Corps of Engineers Safety Manual, EM-385-1-1, and in accordance with all applicable Italian safety laws and norms. The anticipated period of performance is 90 calendar days. Offerors can view and/or download the solicitation via the European Navy Electronic Commerce Online (EURONECO) website at https://euro.neco.navy.mil when it becomes available. All interested offerors shall register at this website. However, registration does not release bidders from the responsibility of checking the solicitation daily for any amendments or other notices. The solicitation is expected to be posted on 25 June 2012. Quotes are expected to be due on 25 July 2012 at 10:00 AM Central European Time (CET). All dates are tentative and are subject to change. This is an internet only solicitation so paper copies will not be provided. A pre bid conference and site visit will be indicated on the solicitation documents. All technical/contractual questions regarding this solicitation must be submitted in writing to the Contract Specialist at: robert.leblanc2@eu.navy.mil.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DON/NAVFAC/N33191SIG/N3319112T0020/listing.html)
- Record
- SN02772626-W 20120613/120611235717-43ba5e01ea582e2a556fc9fd8ff0bdce (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |