SOLICITATION NOTICE
W -- Storage Container Lease
- Notice Date
- 5/22/2012
- Notice Type
- Combined Synopsis/Solicitation
- Contracting Office
- Central Receiving and Shipping Point, Fort Hood, TX 76544
- ZIP Code
- 76544
- Solicitation Number
- W91151-12-T-0160
- Response Due
- 6/13/2012
- Archive Date
- 12/10/2012
- Point of Contact
- Name: Client Services, Title: Sourcing Agent, Phone: 1.877.9FEDBID, Fax: 703.442.7822
- E-Mail Address
-
clientservices@fedbid.com;
- Small Business Set-Aside
- Total Small Business
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is W91151-12-T-0160 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-58. The associated North American Industrial Classification System (NAICS) code for this procurement is 531130 with a small business size standard of $25.50M.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2012-06-13 16:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Fort Hood, TX 76544 The MCC Hood - MCO Hood requires the following items, Brand Name or Equal, to the following: LI 001, Six (6) Records Storage Containers (Medical Records Storage). The container dimensions will be 9' X 10'6" X 23' or approximately 2,070 cubic feet of storage. The units must be equipped with "easy open" door access with high-security locks for added security. Each container must be partitioned into two (2)separate storage areas, with interior fold-away sorting table, 864 Legal Letter Boxes, and 51" deep custom shelving. Each container must be constructed of 16 gauge galvaneal steel, 2" stud wall panel system, with Type 2N non-combustible fire rating, to include ceiling and wall insulation, heat resistant roof covering, and recessed galvaneal steel floor underlayment. The units must contain a electric ventilation system and forklift pockets for ease of maneuverability. The units will be pre-wired for electrical service (with quick disconnect connectors mounted on the exterior of the container), pre-wired for hardwire electrical connection in order to power the electrical exhaust fan and interior lighting, and must be pre-wired for an alarm system, to include an exterior hard wire connector. Containers must include all labor, supplies, and equipment to include delivery and pickup services. (Containers will be delivered to different locations throughout Fort Hood, Texas), 12, MO; LI 002, One (1) Storage Container. The 25 foot storage container is a high security steel storage container, and and is 8'8" X 8' X 25' or approximately 1,700 cubic feet of storage. The container is equipped with easy open door sets, secured by a single secure locking mechanism, requiring only one lock per set of doors. The storage container is a vault constructed of high security steel, and are fire and vandal resistant. The container has the option of two doors on one end or two doors on both ends of the container. The container must be equipped with patented locking system on each door set, and with easy opening doors for ease of access. The container must be a ground level storage unit and allow for the ease of material handling and access, without requiring ramps and special docking mechanisms. (Containers will be delivered to different locations throughout Fort Hood, Texas), 12, MO; LI 003, Three (3) Storage Containers. The 20 foot storage containers are high security steel storage facilities, and is 8'6" X 8' X 20' or approximately 1,360 cubic feet of storage. Each container is equipped with easy open door sets, secured by a single secure locking mechanism, requiring only one lock per set of doors. The storage containers are vaults constructed of high security steel, and are fire and vandal resistant. The containers have the option of two doors on one end or two doors on both ends. The containers must be equipped with patented locking systems on each door set, and with easy opening doors for ease of access. The containers must be a ground level storage unit and allow for the ease of material handling and access, without requiring ramps and special docking mechanisms. (Containers will be delivered to different locations throughout Fort Hood, Texas), 12, MO; LI 004, Two (2) Storage Containers. The 40 foot storage containers are high security steel storage facility, and are 8'6" X 8' X 40' or approximately 1,360 cubic feet of storage. Each container is equipped with easy open door sets, secured by a single secure locking mechanism, requiring only one lock per set of doors. The storage containers are vaults constructed of high security steel, and are fire and vandal resistant. The containers have the option of two doors on one end or two doors on both ends of the container. The containers must be equipped with patented locking system on each door set, and with easy opening doors for ease of access. The containers must be ground level storage units and allow for the ease of material handling and access, without requiring ramps and special docking mechanisms. (Containers will be delivered to different locations throughout Fort Hood, Texas), 12, MO; LI 005, Option 1-Six (6) Records Storage Containers (Medical Records Storage). The container dimensions will be 9' X 10'6" X 23' or approximately 2,070 cubic feet of storage. The units must be equipped with "easy open" door access with high-security locks for added security. Each container must be partitioned into two (2)separate storage areas, with interior fold-away sorting table, 864 Legal Letter Boxes, and 51" deep custom shelving. Each container must be constructed of 16 gauge galvaneal steel, 2" stud wall panel system, with Type 2N non-combustible fire rating, to include ceiling and wall insulation, heat resistant roof covering, and recessed galvaneal steel floor underlayment. The units must contain a electric ventilation system and forklift pockets for ease of maneuverability. The units will be pre-wired for electrical service (with quick disconnect connectors mounted on the exterior of the container), pre-wired for hardwire electrical connection in order to power the electrical exhaust fan and interior lighting, and must be pre-wired for an alarm system, to include an exterior hard wire connector. Containers must include all labor, supplies, and equipment to include delivery and pickup services. (Containers will be delivered to different locations throughout Fort Hood, Texas), 12, MO; LI 006, Option 1- One (1) Storage Container. The 25 foot storage container is a high security steel storage container, and and is 8'8" X 8' X 25' or approximately 1,700 cubic feet of storage. The container is equipped with easy open door sets, secured by a single secure locking mechanism, requiring only one lock per set of doors. The storage container is a vault constructed of high security steel, and are fire and vandal resistant. The container has the option of two doors on one end or two doors on both ends of the container. The container must be equipped with patented locking system on each door set, and with easy opening doors for ease of access. The container must be a ground level storage unit and allow for the ease of material handling and access, without requiring ramps and special docking mechanisms. (Containers will be delivered to different locations throughout Fort Hood, Texas), 12, MO; LI 007, Option 1- Three (3) Storage Containers. The 20 foot storage containers are high security steel storage facilities, and is 8'6" X 8' X 20' or approximately 1,360 cubic feet of storage. Each container is equipped with easy open door sets, secured by a single secure locking mechanism, requiring only one lock per set of doors. The storage containers are vaults constructed of high security steel, and are fire and vandal resistant. The containers have the option of two doors on one end or two doors on both ends. The containers must be equipped with patented locking systems on each door set, and with easy opening doors for ease of access. The containers must be a ground level storage unit and allow for the ease of material handling and access, without requiring ramps and special docking mechanisms.(Containers will be delivered to different locations throughout Fort Hood, Texas), 12, MO; LI 008, Option 1- Two (2) Storage Containers. The 40 foot storage containers are high security steel storage facility, and are 8'6" X 8' X 40' or approximately 1,360 cubic feet of storage. Each container is equipped with easy open door sets, secured by a single secure locking mechanism, requiring only one lock per set of doors. The storage containers are vaults constructed of high security steel, and are fire and vandal resistant. The containers have the option of two doors on one end or two doors on both ends of the container. The containers must be equipped with patented locking system on each door set, and with easy opening doors for ease of access. The containers must be ground level storage units and allow for the ease of material handling and access, without requiring ramps and special docking mechanisms. (Containers will be delivered to different locations throughout Fort Hood, Texas), 12, MO; LI 009, Option 2- Six (6) Records Storage Containers (Medical Records Storage). The container dimensions will be 9' X 10'6" X 23' or approximately 2,070 cubic feet of storage. The units must be equipped with "easy open" door access with high-security locks for added security. Each container must be partitioned into two (2)separate storage areas, with interior fold-away sorting table, 864 Legal Letter Boxes, and 51" deep custom shelving. Each container must be constructed of 16 gauge galvaneal steel, 2" stud wall panel system, with Type 2N non-combustible fire rating, to include ceiling and wall insulation, heat resistant roof covering, and recessed galvaneal steel floor underlayment. The units must contain a electric ventilation system and forklift pockets for ease of maneuverability. The units will be pre-wired for electrical service (with quick disconnect connectors mounted on the exterior of the container), pre-wired for hardwire electrical connection in order to power the electrical exhaust fan and interior lighting, and must be pre-wired for an alarm system, to include an exterior hard wire connector. Containers must include all labor, supplies, and equipment to include delivery and pickup services. (Containers will be delivered to different locations throughout Fort Hood, Texas), 12, MO; LI 010, Option 2- One (1) Storage Container. The 25 foot storage container is a high security steel storage container, and and is 8'8" X 8' X 25' or approximately 1,700 cubic feet of storage. The container is equipped with easy open door sets, secured by a single secure locking mechanism, requiring only one lock per set of doors. The storage container is a vault constructed of high security steel, and are fire and vandal resistant. The container has the option of two doors on one end or two doors on both ends of the container. The container must be equipped with patented locking system on each door set, and with easy opening doors for ease of access. The container must be a ground level storage unit and allow for the ease of material handling and access, without requiring ramps and special docking mechanisms. (Containers will be delivered to different locations throughout Fort Hood, Texas), 12, MO; LI 011, Option 2- Three (3) Storage Containers. The 20 foot storage containers are high security steel storage facilities, and is 8'6" X 8' X 20' or approximately 1,360 cubic feet of storage. Each container is equipped with easy open door sets, secured by a single secure locking mechanism, requiring only one lock per set of doors. The storage containers are vaults constructed of high security steel, and are fire and vandal resistant. The containers have the option of two doors on one end or two doors on both ends. The containers must be equipped with patented locking systems on each door set, and with easy opening doors for ease of access. The containers must be a ground level storage unit and allow for the ease of material handling and access, without requiring ramps and special docking mechanisms. (Containers will be delivered to different locations throughout Fort Hood, Texas), 12, MO; LI 012, Option 2- Two (2) Storage Containers. The 40 foot storage containers are high security steel storage facility, and are 8'6" X 8' X 40' or approximately 1,360 cubic feet of storage. Each container is equipped with easy open door sets, secured by a single secure locking mechanism, requiring only one lock per set of doors. The storage containers are vaults constructed of high security steel, and are fire and vandal resistant. The containers have the option of two doors on one end or two doors on both ends of the container. The containers must be equipped with patented locking system on each door set, and with easy opening doors for ease of access. The containers must be ground level storage units and allow for the ease of material handling and access, without requiring ramps and special docking mechanisms. (Containers will be delivered to different locations throughout Fort Hood, Texas), 12, MO; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MCC Hood - MCO Hood intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MCC Hood - MCO Hood is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. In responding to this request for quote, you must provide the manufacturer's name and part numbers AND salient characteristics of the items you are proposing to sell to the Government. Regardless of the terminology used in each RFQ ("Brand Name or Equal", or "meet minimum stated specifications), the information describing what you are offering must be physically written into the seller's bid specification block. Salient characteristics are defined as "pronounced features of an item that identify it describe its size and composition, functional intent, and/or operational capabilities or limits." When researching product capabilities, you must, as a minimum, respond with feature for feature comparisons in order for your product to be technically evaluated for sufficiency. Responses such as "bidding exact match", "as specified", or cutting and pasting the Government's specification information into the seller's bid specification block are not acceptable responses. Offerors who respond in any of the three examples directly above will be eliminated from the competition without consideration of their offer. If you are bidding the same product as is being requested, your seller bid specification should indicate: "Bidding on Manufacturer (Insert Name) and Part Number (Insert Number). If you are bidding on an "or equal" product, your seller bid specification must state: Bidding on Manufacturer (Insert Name) and Part Number (Insert Number), containing the following salient characteristics (insert salient characteristics). If your response does not contain all of the required information called out in this notice, your quote will be determined nonresponsive and will not be considered for award. The apparent awardee shall acknowledge acceptance of any and all re-postings (amendments), in writing, prior to any award resulting from this solicitation. The applicable NAICS code for this procurement is 531130 with the related size standard of 25.5 M dollars. The NAICS code identified herein must appear in FAR 52.212-3 "Offeror Representations and Certifications" in ORCA and the vendor must be actively registered in that NAICS at the time of closing to be considered for award of any resulting contract. Failure to be properly registered at the time and date of closing will render the quote non-responsive. Fedbid is a mechanism used by this office to solicit for common use commercial items in accordance with FAR 13.5. Fedbid is NOT a forum for filing protests against the Government. Attempts to file protests through Fedbid will not be considered legitimate as they do not conform to the requirements in the Federal Acquisition Regulation (FAR). It is preferable that disputes and protests be resolved as quickly as possible at the lowest level possible before considering the more formal process described below. Interested parties wishing to file an agency protest directly with the Contracting Officer responsible for this acquisition should review the procedures at FAR Part 33 and send your protest to Neta Singley, at neta.a.singley.civ@mail.mil. Interested parties wishing to file an agency protest must abide by the provisions in FAR Part 33, Protests, Disputes, and Appeals. The HQ, AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC, as an Alternate Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 20 working days from filing. To be timely, protests must be filed within the periods specified in FAR 33.10. If you want to file a protest under the AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. All other agency-level protests should be sent to the contracting officer for resolution. The address for filing a protest directly with AMC is: HQ Army Material Command Office of Command Counsel 9301 Chapek Rd, Rm 2-1SE3401 Ft Belvoir, VA 22060-5527; Facsimile number (703) 806-8866 or 8875. Packages sent Federal Express or UPS should be addressed to: HQ Army Material Command Office of Command Counsel 9301 Chapek Rd, Rm 2-1SE3401 Ft Belvoir, VA 22060-5527. The AMC-Level Protest procedures are found at: http://www.amc.army.mil/pa/COMMANDCOUNSEL.asp. If internet access is not available, contact the HQ, AMC to obtain the AMC-Level Protest procedures. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-2, Evaluation- Commercial Items; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/. The Contractor shall NOT make partial line item shipments against any resulting purchase order/contract issued as a result of this solicitation; e.g., if a line item on the contract reads - Computer, 10 each, the contractor shall NOT ship 3 computers on one shipment and 7 computers on a second shipment. Failure to adhere to this requirement will result in invoices being rejected in WAWF and/or a delay in payment for non-conforming shipped quantities. CCR Requirement - Company must be registered on Central Contractor Registration (CCR) before an award could be made to them. If company is not registered in CCR, they may do so by going to CCR web site at http://www.ccr.gov. Proposed responders must submit any questions concerning this solicitation before 11 June 2012, 1300 cst, to reasonably expect a response from the Government. Those questions not received within the prescribed date will not be considered. New equipment ONLY, NO remanufactured products FOB Destination CONUS (CONtinental U.S.) See attached applicable clauses Bid MUST be good for 30 days after submission. No partial bids will be accepted.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/aa18c1a3d548f945424b23fdcefcfffc)
- Place of Performance
- Address: Fort Hood, TX 76544
- Zip Code: 76544
- Zip Code: 76544
- Record
- SN02755217-W 20120524/120523000243-aa18c1a3d548f945424b23fdcefcfffc (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |