SOURCES SOUGHT
66 -- Equipment Calibration
- Notice Date
- 5/22/2012
- Notice Type
- Sources Sought
- NAICS
- 334519
— Other Measuring and Controlling Device Manufacturing
- Contracting Office
- Department of the Air Force, Air Force Materiel Command, Hill AFB OO-ALC, OO-ALC/PKXB, 6038 Aspen Ave (Bldg 1289), Hill AFB, Utah, 84056
- ZIP Code
- 84056
- Solicitation Number
- FA8224-12-R-0143
- Archive Date
- 6/2/2012
- Point of Contact
- Richard A. Salazar, Phone: 8015865548
- E-Mail Address
-
richard.salazar@hill.af.mil
(richard.salazar@hill.af.mil)
- Small Business Set-Aside
- N/A
- Description
- This is not a solicitation announcement. This is a sources sought synopsis only. After review of the responses to this sources sought synopsis, a solicitation announcement may be published in the Fedbizopps website. Responses to this sources sought synopsis are not considered adequate responses to the solicitation announcement. All interested offerors will have to respond to the solicitation announcement in addition to responding to this sources sought announcement. This is a Source Sought Notice representing a market research survey and is not a Request for Quotation. NO SOLICITATION DOUMENTS EXIST AT THIS TIME. Currently Hill AFB is looking for contractors that can calibrate the attached list of equipment per ISO/IEC 17025 accreditation. The ISO/IEC certification must be per the guidelines provided by A2LA's policies and measurement traceability. Plus per ANSI/NCSL Z540.3 standard as applicable. Hill AFB is looking for a contractor that can perform the calibration on all of the following items, on an all or none basis. 1 ea: Instron Load Cell 600 KN, model: 2525-123 3 ea: Instron Load Cell 100 KN, model: 2525-801 1 ea: Instron Load Cell 50 KN, model: 2525-802 1 ea: Instron Load Cell 5 KN, model: 2525-805 1 ea: Instron Load Cell 1 KN, model: 2525-806 1 ea: Epsilon Extensometer, 2"GL, model: 3542-0200-020-HT1 2 ea: United Extensometer, 1"GL, model: EZ.1-2 1 ea: United Extensometer, 2"GL, model: EZ.1-2 1 ea: United Extensometer, 1"GL, model: EZ.1-1 1 ea: United Deflectometor, 1"GL, model: SN 1 ea: Interlaken Test Frame, model: 3310-55-10-6 (with Upper/Lower hydraulic grip's model: 3510-04) 1 ea: 50K load Cell, model: 1032-AF 1 ea: Extensometer, 1"GL, +/- 15% Strain, model 3542-0100-015 1 ea: COD gage, 0.200" GL, +0.100/-0.050, model 3541-01 1 ea: Instron 8800 Controller (w/logic/switch box), model: Fast Track 8800 1 ea: Instron Hardware Operator Panel, model A1721-1211 1 ea: 80 Gallon Hydraulic Power Unit/tank, model OAP-1478 Plus: Peripheral Devices - power & signal cables, hydraulic hoses/lines & pipes, water lines, and /or any other items unmentioned that relates to the functionality of equipment identified above. When responding to this sources sought by e-mail place "Calibration FA8224-12-R-0143" in the subject line of your email. Interest Vendor's shall include the following information in their responses: 1) Company name, address, phone number, primary contact(s), e-mail address, NAICS code(s), business size (i.e., small/large) and DUNS Number. 2) Provide a Statement of Capability that demonstrates your company can provide the equipment and service. 3) BUSINESS SIZE AND SOCIO-ECONOMIC STATUS: (a) Indicate whether your business is large or small (b) If small, indicate if your firm qualifies as a small, emerging business, or small disadvantaged business (c) If disadvantaged, specify under which disadvantaged group and if your firm is certified under Section 8(a) of the Small Business Act (d) Indicate if your firm is a certified Hub-zone firm (e) Indicate if your firm is a woman-owned or operated business (f) Indicate if your firm is a certified Service-Disabled Veteran Owned Small Business (SDVOSB) or Veteran Owned Small Business (VOSB), (g) State whether your firm is registered with the Central Contractor Registration (CCR) at http://www.ccr.gov. NO CAPABILITY STATEMENTS MAY BE SUBMITTED AFTER 1 June 2012. 4) This notice does not obligate the Government to award a contract or otherwise pay for the information provided in response. Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or provide feedback to respondents with respect to any information submitted. (5) No Proprietary, classified, confidential, or sensitive information should be included in your response. The Government reserves the right to use any non-proprietary technical information in any resultant solicitation(s.)
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/AFMC/OOALC/FA8224-12-R-0143/listing.html)
- Place of Performance
- Address: Hill AFB, Hill AFB, Utah, 84056, United States
- Zip Code: 84056
- Zip Code: 84056
- Record
- SN02754372-W 20120524/120522235154-e98cd3e5f422f8940a256aa7d8a5bfaa (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |