SOLICITATION NOTICE
58 -- Multi-Beam Sonar System
- Notice Date
- 5/18/2012
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 334511
— Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing
- Contracting Office
- USACE District, Seattle, ATTN: CENWS-CT, PO Box 3755, Seattle, WA 98124-3755
- ZIP Code
- 98124-3755
- Solicitation Number
- W912DW-12-Q-0109
- Response Due
- 6/7/2012
- Archive Date
- 8/6/2012
- Point of Contact
- George Barnes, 206-764-6801
- E-Mail Address
-
USACE District, Seattle
(george.e.barnes@usace.army.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. Minimum Performance Requirements: Multibeam shall consist of dual frequencies of 200 KHz and 400 kHz to allow for accurate seafloor coverage at varying depths up to 100 meters. Multibeam shall have capability of up to or better than.5 degrees by 1 degree beams dynamically focused to maximize accuracy and area coverage. Multibeam shall have a minimum swath of 140 degrees. Required to maximize the swath coverage resulting in reduced fuel consumption for the surveys. Beam spacing shall consist of equiangular or equidistant to insure maximum accuracy. Multibeam shall consist of Real-Time bathymetry display to ensure proper data recording and eliminating repeated surveys. Multibeam shall consist as a minimum of 256 dynamic focused beams per ping resulting in high density soundings ensuring accurate surveys. Also increases the amount of survey data collected in the survey area for modeling. Maximum update rate shall consist of at least 50Hz to maximize accuracy. Exports beam-formed imagery data required for after survey data processing. Required for quality control of data being collected and processed. Depth resolution shall be 5mm or greater required for after survey data processing. Pulse length shall be 50 to 300 micro seconds to maximize accuracy. Depth rating shall be a minimum of 100 meters to insure threshold accuracy needed for deep waters of survey operation areas. System shall be integration capable with Hypack/Hysweep data collection and process software currently used by Seattle District. System shall be installed by contractor and will be hull mounted onto the Seattle Districts 34 boat. Any fabrication or design needed for the install of the Multibeam system on the 34 boat will be performed by the contractor. The proposed install and hull modifications must meet the flowing criteria. After installation of the Multibeam, the survey boat must be trailer able on its current trailer and must meet or exceed USACE payment survey performance specifications as outlined in EM 1110-2-1003 with the proposed installation. Equipment shall be tested after installation to insure proper operation. Upon completion of successful operational testing, equipment operation training shall be provided to a minimum of two (2) and a maximum of four (4) personnel to ensure proper use of equipment. Installation and training shall be conducted at Seattle, King County, WA
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USA/COE/DACA67/W912DW-12-Q-0109/listing.html)
- Place of Performance
- Address: USACE District, Seattle 4735 East Marginal Way S Seattle WA
- Zip Code: 98134-2388
- Zip Code: 98134-2388
- Record
- SN02752635-W 20120520/120519000700-ba76ec00e7352ecd2b325306bdcf7065 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |