Loren Data's SAM Daily™

FBO DAILY ISSUE OF MAY 19, 2012 FBO #3829
DOCUMENT

83 -- Patient Gowns, Reusable, Multi-Purpose, IV, Telemetry and X-ray - Attachment

Notice Date

5/17/2012
 

Notice Type

Attachment
 

NAICS

315299 — All Other Cut and Sew Apparel Manufacturing
 

Contracting Office

VA National Acquisition Center - Department of Veterans Affairs National Acquisition Center
 

Solicitation Number

VA797N12R0082
 

Archive Date

8/15/2012
 

Point of Contact

Amber Zavala
 

E-Mail Address

786-5241<br
 

Small Business Set-Aside

Service-Disabled Veteran-Owned Small Business
 

Description

Issued 05/17/2012 Closes 06/01/2012 The VA National Acquisition Center intends to solicit for Patient Gowns, Reusable. A five year contract (base year and four one year options) is anticipated. Deliveries are shipped to VA facilities nationwide, Hawaii, Puerto Rico, Alaska, and DC, after receipt of delivery orders. The VA is seeking Service Disabled Veteran Owned Small Businesses (SDVOSB) (MUST be registered in Vetbiz) that can provide these Patient Gowns, Reusable. If you are a SDVOSB distributor the products must be manufactured by a small domestic (or "outlying area") manufacturer. "Outlying areas" means- (1) Commonwealths. (i) Puerto Rico.(ii) The Northern Mariana Islands (2) Territories.(i) American Samoa.(ii) Guam.(iii) U.S. Virgin Islands; and (3) Minor outlying islands.(i) Baker Island.(ii) Howland Island. (iii) Jarvis Island.(iv) Johnston Atoll.(v) Kingman Reef. (vi) Midway Islands.(vii) Navassa Island.(viii) Palmyra Atoll. (ix) Wake Atoll. **DO NOT SEND QUOTES OR SAMPLES** this is a Sources Sought Notice to determine if a SDVOSB set-aside contract is possible. SDVOSBs please e-mail your capability to provide these products to: Amber Zavala Contract Specialist U.S. Department Of Veterans Affairs National Acquisition Center National Contract Service P.O. Box 76, Bldg. 37 1st Ave. 1 Blk N of 22nd St. Hines, IL. 60141 E-mail: Amber.Zavala@va.gov Please only reply if you can supply this product from a Small Domestic Manufacturer (500 employees or less) or the outlying countries listed above. In your reply, please state the name of the manufacturer, address and telephone number for verification purposes only. Verification is necessary in order to set this solicitation aside for SDVOSB's only. Specifications and estimated annual quantities listed below. Estimated Annual Quantity: 58,768 Gown, Patient, Reusable, Multi-Purpose Minimum Technical Requirements MTR 1Fabric Content: 45-65% polyester/35-55% cotton range MTR 2Light to medium weight fabric - 4.0 - 4.5 oz./square yard MTR 3Sweep - One-size, Standard - 62 - 68 in. MTR 5Offers minimum one solid and one print MTR 6Length- 41 - 52 in. MTR 7Crew, key hole or v-neck MTR 8Angle back/ min. overlap 12 in. MTR 9Raglan or set-in sleeves - minimum 22 in. opening, 6 in. length, 2 in. inseam MTR 10Sleeve hem must be smooth and even with non-bunching of fabric MTR 11Hem must be free from bulk MTR 12Flat felled, double-stitched seams or single needle lockstitch and safety stitch (whipped), no openings in seams MTR 14Stress points are bartacked MTR 15Fasteners either tie, stainless steel snap or combination - T (tie), S (snap), C (Combo) MTR 16Placement of fasteners at neck and mid-back avoids pressure points MTR 17Ties made of non-curling twill tape or 100% polyester MTR 18Ties are heat sealed, non-raveling MTR 19All ties are bartacked MTR 20Snaps are reinforced (ring, cap or gripper style) MTR 21Functionally correct alignment of the 2 parts of fastener MTR 22Manufacturer Label: Constructed of either Polyester or Nylon MTR 24Contents of Manufacturer Label: Fabric Content, Care Instructions, Country of Manufacture MTR 25Product should be colorfast Intended Use: A short sleeve garment designed to be worn by patients in the hospital. Estimated Annual Quantity: 26,831 Gown, Patient, Reusable, I.V. Minimum Technical Requirements MTR 1Fabric Content: 45-65% polyester/35-55% cotton range MTR 2Light to medium weight fabric - 4.0 - 4.5 oz./square yard MTR 3Sweep - One-size, Standard - 62 - 68 in. MTR 5Offers minimum one solid and one print MTR 6Knee Length - 41 - 52 in. MTR 7Crew, key hole or v-neck MTR 8Overlap not less than 12 in. at closing MTR 9Gown must have large raglan sleeves (minimum 22" opening, minimum 6" long, minimum 2" inseam length) MTR 10Sleeve hem must be smooth and even with no bunching of fabric MTR 11Four (4) reinforced stainless steel snaps or bar tacked ties on sleeves. Sleeves must open from shoulder to end of sleeve MTR 12Flat felled, double-stitched seams or single needle lockstitch and safety stitch (whipped) MTR 13Hem must be free from bulk MTR 14All stress points must be bartacked MTR 15Stress points are bartacked MTR 16Fasteners either tie, stainless steel snap or combination T (tie), S (snap), C (Combo) MTR 17Ties are heat sealed, non-raveling MTR 18Placement of fasteners at neck and mid-back avoids pressure points MTR 19All ties are bartacked MTR 20Functionally correct alignment of the 2 parts of fastener MTR 21Manufacturer Label: Constructed of either Polyester or Nylon MTR 22Contents of Manufacturer Label: Fabric Content, Care Instructions, Country of Manufacture MTR 23Product should be colorfast Intended Use: A short sleeve garment designed to be worn by patients in the hospital while receiving intravenous therapy. Estimated Annual Quantity: 5,500 Gown, Patient, Reusable, X-ray Minimum Technical Requirements MTR 1Fabric Content: 45-65% polyester/35-55% cotton range MTR 2Light to medium weight fabric - 4.0 - 4.5 oz./square yard MTR 3Offers minimum one solid and one print MTR 4Sweep - minimum 70 in. MTR 53 Arm Hole MTR 6Length 41 - 52 in. MTR 7Can be worn front or back (anterior/posterior exam) MTR 8Flat felled, double-stitched seams or single needle lockstitch and safety stitch (whipped) MTR 9Seams must be free from puckering, bulk, and finished to prevent raveling with no openings in seams MTR 10Stress points are bartacked MTR 11Manufacturer Label: Constructed of either Polyester or Nylon MTR 12Contents of Manufacturer Label: Fabric Content, Care Instructions, Country of Manufacture MTR 13Product should be Colorfast Estimated Annual Quantity: 10,787 Gown, Patient, Reusable, Telemetry Minimum Technical Requirements MTR 1Fabric Content: 45-65% polyester/ 35-55% cotton MTR 2Light to medium weight fabric - 4.0 - 4.5 oz./square yard MTR 3Sweep - One-size, Standard - 62 - 68 in. MTR 5Offers minimum one solid and one print MTR 6Knee Length - 41 - 52 in. MTR 7Crew, key hole or v-neck MTR 8Overlap not less than 12 in. at closing MTR 9Raglan or set-in sleeves - minimum 22 in. opening, 6 in. length, 2 in. inseam MTR 10Sleeve hem must be smooth and even with no bunching of fabric MTR 11Gown must have large telemetry pocket with reinforced stitching MTR 12Pocket must have a concealed buttonhole MTR 13Pocket must be free from bulk or puckering with no opening in seams MTR 14Flat felled, double-stitched seams or single needle lockstitch and safety stitch (whipped) MTR 15Seams must be free from puckering, bulk, and finished to prevent raveling with no openings in seams MTR 16Hem must be free from bulk MTR 17Stress points are bartacked MTR 18Closures must be either tie, steel snaps or a combination of both (no hook & loop or plastic or Velcro) MTR 19Ties are heat sealed, non-raveling MTR 20Placement of fasteners at neck and mid-back avoids pressure points MTR 21All ties are bartacked MTR 22Snaps are reinforced (ring, cap or gripper style) MTR 23Manufacturer Label: Constructed of either Polyester or Nylon MTR 24Contents of Manufacturer Label: Fabric Content, Care Instructions, Country of Manufacture Intended Use: A short sleeve garment designed to be worn by patients in the hospital on telemetry.
 

Web Link

FBO.gov Permalink
(https://www.fbo.gov/spg/VA/VANAC/VANAC/VA797N12R0082/listing.html)
 

Document(s)

Attachment
 

File Name: VA797N-12-R-0082 VA797N-12-R-0082.docx (https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=343202&FileName=VA797N-12-R-0082-000.docx)

Link: https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=343202&FileName=VA797N-12-R-0082-000.docx

 

Note: If links are broken, refer to Point of Contact above or contact the FBO Help Desk at 877-472-3779.
 

Record

SN02751320-W 20120519/120518000805-f2f0f8f9e41abee9800fd3b3d89d68f0 (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |