SOURCES SOUGHT
99 -- Qinetiq Parts for Talon Robot
- Notice Date
- 5/9/2012
- Notice Type
- Sources Sought
- NAICS
- 336992
— Military Armored Vehicle, Tank, and Tank Component Manufacturing
- Contracting Office
- N68836 NAVSUP Fleet Logistics Center Jacksonville Naval Air Station Building 110, 3rd Floor 110 Yorktown Rd Jacksonville, FL
- ZIP Code
- 00000
- Solicitation Number
- N6883612RQINET
- Response Due
- 5/16/2012
- Archive Date
- 6/16/2012
- Point of Contact
- Rose Pryer, Contract Specialist,904-542-1246,rose.i.pryer@navy.mil,Mattie J.Washington,Contracting Officer,904-542-4452,mattie.washington @navy.mil
- Small Business Set-Aside
- N/A
- Description
- This sources sought synopsis does not constitute a Request for Proposal (RFP) and it should not be construed as a commitment of any kind by the government to issue a formal solicitation or ultimately award a contract. No contract will result directly from this notice. The Government does not intend to pay for any information furnished pursuant to this RFI. Nor is the Government tasking any offeror to develop any technologies described herein. The US Government is in no way liable to pay for or reimburse any companies or entities that respond to this announcement. Any costs incurred by interested companies in response to this announcement will NOT be reimbursed. Description: Procure the following QINETIQ parts: CategoryType/ NomenclatureStock/ Part No. QinetiQSHAFT, WHEEL TENSIONER (AXLES)DSI-160-1526 QinetiQASSEMBLY, SLIDER, TENSIONER LARGE R.S.RDSI-03011-1 QinetiQASSEMBLY, SLIDER, TENSIONER LARGE L.S.RDSI-03011-2 QinetiQSLEEVE BEARING (INSIDE TENSIONER SLIDER)DSI-140-0751 QinetiQFLANGE BEARING (IDLER HUB BEARING)DSI-140-0755 QinetiQSPRING GUIDE TENSIONERRDSI-03063 QinetiQPIN AXLE, SPROCKET DSI-160-0662 QinetiQTRACKS (STANDARD)DSI-500-0298 QinetiQASSEMBLY, IDLER (LARGE IDLER)RDSI-03019 QinetiQASSEMBLY, 3RD (SMALL IDLER)RDSI-03024 QinetiQDRIVE SPROCKETRDSI-03018 QinetiQHEAVY DUTY TRACK DSI-500-0690 QinetiQCable, Waterproof, for Lithium BatteryDSI-130-0126 QinetiQBATTERY, OCU, LITHIUM, RECHARGEABLEDSI-140-0038 QinetiQOCU BATTERY CABLERDSI-01278 QinetiQOCU ANTENNA, TELESCOPINGDSI-140-0098 QinetiQARM CHAIN MASTER LINKDSI-140-0350 QinetiQCROSSBAR, SUBASSEMBLYDSI-500-0027 QinetiQPOWER SWITCHDSI-130-0099 QinetiQBALLISTIC COVERDSI-500-0515 QinetiQBATTERY LITHIUMRDSI-04209 QinetiQANTENNA DATA BASE VEHICLE DSI-500-0426 QinetiQANTENNA VIDEO BASE VEHICLE DSI-500-0096 QinetiQSPACER (SMALL IDLER AXLE)RDSI-03044 QinetiQHEADLAMP ASSY. HALOGENDSI-500-0525 QinetiQHARNESS ASSEMBLY, UPPER ARMDSI-130-0058 QinetiQHARNESS ASSEMBLY, ARM EXTENSIONDSI-130-0092 QinetiQHALOGEN LIGHT BULB DSI-140-0196 QinetiQMOTOR, DRIVE, VEHICLE (HEAVY DUTY)DSI-500-1394 QinetiQMOTOR, ARM ASSEMBLY DSI-500-0135 QinetiQMOTOR, DRIVE,VEHICLE DSI-500-0136 QinetiQCAMERA ASS'Y,INFRARED ILLUMINATED DSI-500-0246 QinetiQKEY, WOODRUFF PIN RDSI-00186-1 QinetiQKEY 1/8" SQUARERDSI-00186-2 QinetiQHUB, ARM MOTOR,STAINLESS STEELRDSI-03057 QinetiQBALL BASE W/BALL ONLY RDSI-00829-1 QinetiQGRIPPER ASSEMBLY,HEAVY DUTY DSI-500-0410 QinetiQCLAMP, IR CAMERA DSI-500-0423 QinetiQARM CHAIN ASSEMBLY RDSI-03067 QinetiQTALON PARTS KITS DSI-500-0415 QinetiQPC Board, Comms Distribution DSI-200-0002 QinetiQPC Board, Video Matrix Board DSI-200-0003 QinetiQPC Board, Power Distribution, E-Box DSI-200-0004 QinetiQPC Board, Audio Amplifier DSI-500-1115 QinetiQPC Board, SBC Power Supply DSI-200-0020 QinetiQPC Board, Controller, LCD DSI-200-0024 QinetiQPC Board, Quad Video ProcessorDSI-200-0050 QinetiQPC Board, OCU Controller DSI-200-0060 QinetiQPC CONTROL BOARD DSI-500-0023 QinetiQBattery Tray for BB2590 Lithium Batteries DSI-140-0947 QinetiQMount, Post, AntennaDSI-160-0025 QinetiQOCU L PANEL DSI-500-0151 QinetiQOCU MONITOR DSI-500-0126 QinetiQHD SPRING TENSIONER DSI-500-0631 QinetiQPAN/TILT CAMERADSI-500-0042 The interested offerors will be required to submit by the closing date and time, information necessary to conduct a technical analysis. Please provide any information/capability in providing test kits, including descriptive literature, brochures, and other innovative suggestions/recommendations for meeting the requirement, including a narrative explaining how your company can meet the requirements for Qinetic parts. Explain your company s capabilities in providing Qinetic parts. In addition, offerors will be required to furnish the following information: Company Name, Point of Contact (email and phone), and CCR Information (Cage Code and Dunn & Bradstreet numbers); Identify if your business in registered both in US and US Business Operating in a Foreign Country; Type of Business based on NAICs code (i.e. Large Business, Small Business (e.g. HUB Zone, Service Disabled Veteran Owned Small Business, 8(a), Women-Owned, etc.). Additionally, if a joint venture or partnership, the offeror will be required to provide all information pertaining to each company as set forth above; explain if subcontracting with US Subcontractors and/or Suppliers how you can meet DoD s Small Business Goals for the various programs. If you have an approved master and/or company-wide subcontract plan, provide a copy; and specify if your firm 252.209-7002 DISCLOSURE OF OWNERSHIP OR CONTROL BY A FOREIGN GOVERNMENT (JUN 2010). Responses to this Sources Sought Synopsis is due no later than 16 May 2012 Eastern Savings Time to Mattie J. Washington, Mattie.J.Washington@navy.mil and please copy Rose Pryer,Rose.i.pryer@navy.mil Submissions should be in electronic format. Please limit submissions to no more than 30 pages (The subcontracting plan, if applicable, is not included as part of the page limitation requirements). Please note:When electronic submission of proposals is allowed, please be aware that the Navy s computer network will not accept any attachments that are 10MB or larger, or with the extension .zip . PDFs are recommended. Our computer network will also periodically block IP addresses, and attachments, that it considers to be harmful, without our knowledge. As a backup, a fax number is also provided. Whichever the electronic method used, it is recommended that the offeror confirm receipt with the Contract Specialist to make sure that their proposal was received in a timely manner. Oral communications are not acceptable in response to this notice. Information provided will be treated as Business Sensitive and will not be shared outside of Government activities and agencies without the permission of the provider. Information shall be provided free of charge to the Government.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/42c28f570bac7b408ed0a578ecadeb7f)
- Place of Performance
- Address: CENTER FOR EOD AND DIVING
- Zip Code: 350 SOUTH CRAG ROAD CODE N4, PANAMA CITY, FL
- Zip Code: 350 SOUTH CRAG ROAD CODE N4, PANAMA CITY, FL
- Record
- SN02743374-W 20120511/120509235310-42c28f570bac7b408ed0a578ecadeb7f (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |