SOLICITATION NOTICE
79 -- Brush, Scrub - Brush, Scrub
- Notice Date
- 5/2/2012
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 339994
— Broom, Brush, and Mop Manufacturing
- Contracting Office
- General Services Administration, Federal Acquisition Service (FAS), Southwest Supply Operations Center (QSDL), 819 Taylor St Room 6A00, Fort Worth, Texas, 76102, United States
- ZIP Code
- 76102
- Solicitation Number
- QSDLAA-G4-12-0037-SQA
- Archive Date
- 5/26/2012
- Point of Contact
- Lana C. Tecci, Phone: 817-850-8279
- E-Mail Address
-
lana.tecci@gsa.gov
(lana.tecci@gsa.gov)
- Small Business Set-Aside
- N/A
- Description
- BRUSH, SCRUB: The brushes shall be pot and pan scrub brushes. NSN: 7920-00-061-0037 (IPD Dated 4/05/12) BRUSH, SCRUB : The brushes shall be pot and pan scrub brushes conforming with the following characteristics: Unit of Issue - EA (each) At the option of the manufacturer, the handles shall be composed of wood or general purpose impact resistant polypropylene or styrene-butadiene. Wood handles shall be knot-free, clear, closed grained and straight grained. Polypropylene and styrene-butadiene handles shall be free from any imperfections. Brush filler shall be polymide filament. Polymide filament shall have an average diameter of 0.022 inch (0.6 mm), without artificial color added or white. Any metal components, such as staple wire, shall be inherently corrosion resistant, or plated to resist corrosion. The brush shall be similar in appearance to Figure 1. Wood blocks shall be solid, plastic blocks may be molded with a depression in the back at the manufacturer's option. All edges of the blocks shall be rounded. Staples and filler shall be driven to the bottom of the tuft holes and the staples imbedded in the block of the bottom of the holes. The filler shall be firmly and permanently attached to the block so that when a tuft is grasped it is not removable when pulled by hand. The blocks shall be permanently marked with the manufacturer's name or recognized trademark. The brush shall be constructed similar to figure 1 and shall meet the dimensional requirements of table I. Table I Characteristic Dimension Block Length, overall 6-1/8 +1/2, -1/8 inches Width at widest point 2-1/2 ± 1/4 inches Thickness 3/4 +1/4 -1/8 inch Depth of tuft holes 1/4 inch minimum Filler length clear of block 1-3/8 inch minimum The finished brushes shall be free from splinters, surface defects, flashing, or other defects that may affect serviceability, durability or appearance. The brush filler material shall be evenly and uniformly trimmed to conform with the dimensional requirements.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/e15b325ef5db100948ed171d8e2bc104)
- Record
- SN02737624-W 20120504/120503000130-e15b325ef5db100948ed171d8e2bc104 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |