SOLICITATION NOTICE
32 -- Computerized Panel Saw
- Notice Date
- 4/18/2012
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 333210
— Sawmill and Woodworking Machinery Manufacturing
- Contracting Office
- M67001 MARINE CORPS BASE CAMP LEJEUNE - RCO Marine Corps Base Camp Lejeune, NC
- ZIP Code
- 00000
- Solicitation Number
- M6700112Q0150
- Response Due
- 5/3/2012
- Archive Date
- 5/18/2012
- Point of Contact
- Thomas Kunish 910-451-5488
- Small Business Set-Aside
- Total Small Business
- Description
- THIS IS A SOLICITATION for commercial items prepared in accordance with the format in subpart 12.6 as supplemented with additional information included in this solicitation. This announcement constitutes the only publication. A written solicitation will not be issued. All responsible sources may submit a quote which, if timely received must be considered by the agency. The solicitation number M67001-12-Q-0150 is issued as a request for quotation (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-56 and DCN 20100413. This solicitation is set aside 100% for small business. The North American Industrial Classification System (NAICS) code for this requirement is 333210. The Marine Corps Installations East Contracting Department, Camp Lejeune, North Carolina 28547 has a requirement for: CLIN 0001 HENDRICK NP4 3200 COMPUTERIZED PANEL SAW, MODEL NPR 3200R-PL/G Salient Characteristics Length of Cut: 126 - Adjustable from 0 to 126 Max. Pusher Stroke: 126 Dept of Cut: 4 Automatic blade height adjustment according to material thickness. Saw protrusion height is 4 ½ Main Saw motor: 20 HP, 230VAC, 3 PH, 4 Pole Main Blade: 16 diameter x 1 bore. Drive slots are used to provide maximum power. 300- 1800 RPM, variable by AC inverter using a remote dial on the operation console. Saw Carriage Speed: 0 to 4000 inches per minute variable by AC servo using precision rack and pinion. Return stroke is a fixed high speed and is encoded to minimize stroke and cycle time. Pusher Fence Speed: 0 to 3000 inches per minute via AC closed loop servo and precision rack and pinion drive. Material Indexing/ Grippers: 7 Pneumatic grippers with 4 for pulling heavy sheets onto the rear table for processing and security holding material. Solid aluminum plates between each gripper to allow cross cutting of narrow strips, tube and rod. Material Hold-Down: Full-length pneumatic pressure beam utilizing a split beam design. Pressure beam holding pressure will be fully adjustable. All beams will have a sponge rubber mounted on the bottom side. Material side Aligner: Encoded side aligner; fully automatic 50 stroke. Rear Table: Heavy-duty welded table frames and solid phenolic table surface covering the entire black bed. The solid back table allows for the cutting of small parts and thin strips. Front Tables: One fixed and two moveable tables all with air floatation and phenolic tabletop surfaces. All tables 24 wide x 48 long. A standard deviation of 5% shall be accepted on table dimensions. Controller: Touch screen controller with large 8.4 TFT display with 64K color and 640 x 480 resolution. Controller provides onscreen diagnostic. A standard deviation of 5% shall be accepted on size of touch screen and resolution. Regulators: Front mounted individual pressure regulator, pressure beam and material side aligner Blade change: The panel saw s blade change shall not require any wrenches. This machine shall be Pneumatic. Safety Features : oSafety light curtains across the front of the machine to prevent intrusion of the cutting area. oSafety cages around back perimeter of machine to prevent intrusion of the moving pusher. oFront and rear emergency stop pull cables, safety bar mounted on the front of the pressure beam and emergency stop switches located in operational areas. oSaw blade cover has an interlock system that will not allow access to the blade while it is running. oSafety light curtains oFront pull cable stop & safety shield Dust collection connections: Four (4) 6 outlets for maximum airflow. Connectivity: The contractor shall ensure the ability to dial-in to the machine and assess deficiencies, correct any parameters and reinstall the operating software. Set up Blade: Included Installation and training: The contractor shall provide onsite installation and training by a factory trained employee. Training shall be accomplished 2-4 hours once installation is completed. Approximately three (3) civilians and two (2) Marines will be trained on the new panel saw. The contractor shall provide remote dial-in support with the panel saw controller P-3 will provide an outside/internet cable to the machine's computer (per S-6 request). Power Requirement s: Preservation, Packaging and Packing (PP&P) warehouse is running with 208 Voltage. 208 voltage is the preferred voltage but 230 voltage will be an acceptable substitute. Warranty: One year parts and labor warranty. All warranty parts are sent UPS ground free of charge. Site Visit Upon Request POCs on site visit are as follows, 1.SSgt Brown, Wesley (Supply Chief), wesley.brown@usmc.mil 2.SSgt Avila, Alfonso (Box Shop SNCOIC), alfonso.avila@usmc.mil 3.MSgt Rodriguez, Hector (Operations), hector.rodriguez@usmc.mil 4.GySgt Stewart, Nicolas (Operations Chief), nicolas.stewart@usmc.mil 5.MGySgt Jiggetts, Andrew (P-3 SNCOIC), andrew.jiggetts@usmc.mil The contractor shall ensure installation and delivery is completed by May 30, 2012 Quotes and technical specifications should be on separate documents. All responsible sources may submit a response which, if timely received, must be considered by the agency. Brand name or equal items accepted. Salient characteristics are provided. Product brand names and model numbers are supplied for reference only. Government will accept any equal product meeting the stated salient characteristics for each listed CLIN. All equal items quoted must include descriptive literature with detailed specifications. Offers shall include a detailed warranty description for all supplies. The Government will award the contract to the quoter who represents the lowest price technically acceptable. Offerors are responsible for ensuring their submitted quote has been received and is legible. Submit quote, technical specifications, and any questions to thomas.kunish@usmc.mil. The following Federal Acquisition Regulation (FAR) provisions and clauses apply to this acquisition: FAR 52.212-1 Instructions to Offers--Commercial Items; FAR 52.212-3 Offeror Representations and Certifications--Commercial Items; FAR 52.212-4 Contract Terms and Conditions--Commercial Items; FAR 52.212-5 Contract Terms and Conditions Required to Implement Statutes of Executive Orders--Commercial Items; FAR 52.219-6 Notice of Total Small Business Set-Aside; FAR 52.204-7 Central Contractor Registration; 52.222-3 Convict Labor; 52.222-19 Child Labor; 52.222-20 Prohibition of Segregated Facilities; 52.222-26 Affirmative Action for Workers with Disabilities; 52.232-33 Payment by Electronic Fund Transfer; 52.223-18 Contractor Texting; 52.211-6 Brand Name or Equal. The following Defense Federal Acquisition Regulation Supplement ( DFARS) clauses are applicable to the acquisition: 252.212-7001 Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisitions of Commercial Items; DFARS 252.225-7000 Buy American Act-Balance of Payments Program Certificate; DFARS 252.225-7001 Buy American Act and Balance of Payments Program; DFARS 252.212-7000 Offeror Representations and Certifications-Commercial Items; and DFARS 252.232-7003 Electronic Submission of Payment Requests; DFARS 252.201-7000 Contracting Officer s Representative; DFARS 252.203-7002 Requirement to Inform Employees of Whistleblower Rights; 252.204-7004 (Alt A.) Central Contractor Registration; 252.209-7001 Disclosure of Ownership or Control by the Government of a Terrorist Country; 252.209-7004 Subcontracting with Firms That Are Owned or Controlled by the Government of a Terrorist Country; 252.204-7003 Control of Government Personnel Work Product; 252.243-7001 Pricing of Contract Modifications. QUOTER SHALL PROVIDE COMPLETED COPIES OF FAR 52.212-3 OR ONLINE REPRESENTATIONS AND CERTIFICATIONS APPLICATION (ORCA) RECORD WITH THEIR QUOTE. ORCA is located at http://orca.bpn.gov. The provisions and clauses can be found at FAR website: http://www.arnet.gov/far/. The Quoter is required to provide their Contractors DUNS Number and Commercial and Government Entity (CAGE) code with their quote. The CAGE code entered must be for that name and address provided by the Contractor. Quoters are required to be registered in the Central Contractor Registration database (CCR), and Wide Area Work Flow database. For WAWF-RA, visit their website at: https://wawf.eb.mil or for WAWF Assistance, contact 910-451-2142. For more information about registering, contact CCR Regional Assistance Center 888-227-2423 or visit their website at: http://www.ccr.gov/. Quoters must be registered prior to receiving an award for this solicitation or for any future awards. Quoters responding to this announcement shall submit their quotations in accordance with FAR 52.212-1. The closing date for this solicitation is 5/3/2012 at 11:00 A.M. EST. Quoters are responsible for ensuring that their submitted quote has been received and legible. Submit quotes to thomas.kunish@usmc.mil.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DON/USMC/M67001/M6700112Q0150/listing.html)
- Place of Performance
- Address: Camp Lejeune, Camp Lejeunce, NC
- Zip Code: 28542
- Zip Code: 28542
- Record
- SN02725697-W 20120420/120419000104-f5874a987aa190e68613bc9a99d4d888 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |