SRCSGT | 10 | SEAR STEEL | 08-Apr-12

FBO DAILY ISSUE OF APRIL 08, 2012 FBO #3788
SOURCES SOUGHT

10 -- SEAR STEEL

Notice Date: 4/6/2012
Notice Type: Sources Sought
NAICS: 332994 — Small Arms Manufacturing
Contracting Office: Defense Logistics Agency, DLA Acquisition Locations, DLA Land and Maritime - BSM, P O Box 3990, Columbus, Ohio, 43216-5000, United States
ZIP Code: 43216-5000
Solicitation Number: 1010-00-181-3413
Archive Date: 5/2/2012
Point of Contact: David B Nelson, Phone: 614-692-7893
E-Mail Address: david.nelson@dla.mil
(david.nelson@dla.mil)
Small Business Set-Aside: N/A
Description: Please review the below NSN and all attached technical requirements and provide us with any sources that are able to manufacture the item. Please also provide the location of the manufacturer (City and State OR country if applicable). Please also provide POCs for these manufacturers if available. All of this information can be submitted to David Nelson at David.Nelson@d la.mil, Phone 614 692 7893. We thank you in advance for your assistance. NSN :1010-00-181-3413 TECHNICAL REQUIREMENTS FOR SOLICITATION SPM7LX-12-R-0060 NOTE: Palletization shall be in accordance with MD00100452 REV B dated 7/30/08. PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN NSN: 1010001813413 CRITICAL APPLICATION ITEM SEAR, STEEL. THIS ITEM IS A "DEFENSE ARTICLE" AS DEFINED IN AND SUBJECT TO THE INTERNATIONAL TRAFFIC IN ARMS REGULATIONS (22 C.F.R. §§ 120-30) AND THE ARMS EXPORT CONTROL ACT (22 U.S.C.A. §§2778-2799). ANY MANUFACTURER OR EXPORTER OF DEFENSE ARTICLES IS REQUIRED TO REGISTER WITH THE DIRECTORATE OF DEFENSE TRADE CONTROLS (DDTC), DEPARTMENT OF STATE. DOCUMENTARY EVIDENCE OF REGISTRATION MAY BE REQUIRED PRIOR TO AWARD. ADDITIONAL EXPORT RESTRICTIONS APPLY AS INDICATED HEREIN. FAILURE TO SUBMIT DDTC REGISTRATION WHEN REQUESTED WILL MAKE A QUOTE/OFFER INELIGIBLE FOR AWARD. DUE TO THE CRITICAL APPLICATION OF THIS ITEM, SOURCES ARE RESTRICTED TO APPROVED SOURCES ONLY. EVEN THOUGH APPROVED SOURCES AND PART NUMBERS ARE PROVIDED, THE ITEMS FURNISHED MUST ALSO MEET THE REQUIREMENTS OF THE CITED DRAWINGS. ANY UNAPPROVED SOURCE SEEKING APPROVAL WILL BE SUBJECT TO A MANDATORY PREAWARD SURVEY, GOVERNMENT FIRST ARTICLE TESTING, AND PRODUCT VERIFICATION TESTING. THE GOVERNMENT MAY CONSIDER MULTIPLE AWARDS IN ACCORDANCE WITH DSCC PROVISION 52.217-9C07-SUPPLY ASSURANCE THROUGH MULTISOURCE CONTRACTING. __________ ENGINEERING EXCEPTION DATA __________ QQ-C-320 HAS BEEN REPLACED BY AMS 2460. PLEASE ASSURE ALL REQUIREMENTS OF THIS SPECIFICATION ARE COMPLIED WITH. ______ END OF ENGINEERING EXCEPTION DATA ______ ________ SPECIAL PACKAGING REQUIREMENTS ________ UNLESS OTHERWISE SPECIFIED, CLEANING AND DRYING SHALL BE IN ACCORDANCE WITH PARAGRAPH 5.2.1 OF MIL-STD-2073-1. BAG SHALL BE NON-TOXIC, TRANSPARENT, 4 MIL THICK POLYETHYLENE FILM HAVING A MULTI-METAL VOLATILE CORROSION INHIBITOR. BAG SHALL BE FABRICATED IN ACCORDANCE WITH MIL-DTL-117 FOR A CLASS-B BAG. SUGGESTED SOURCES OF SUPPLY: CORTEC / VpCI 126 DAUBERT-CROMWELL / CLEAR PAK 3000 ZERUST / ICT 510-C COMPATIBILITY PROVISIONS OF MIL-I-8574 APPLY. _____ END OF SPECIAL PACKAGING REQUIREMENT _____ IF REQUIRED BY CONTRACT, GOVERNMENT FIRST ARTICLE TEST APPLIES. 5 EXHIBITS ARE REQUIRED. PRODUCT VERIFICATION TESTING (PVT) CLAUSE DLAD 52.246-9004 IS INVOKED FOR THE REFERENCED CONTRACT. PVT SAMPLES MUST BE INSPECTED, PACKAGED AND MARKED AS REQUIRED IN THE CONTRACT. ONE (1) SAMPLE MAY BE DESTROYED DURING TESTING. PRODUCT VERIFICATION TESTING IS MANDATORY AND WILL BE PERFORMED PRIOR TO ACCEPTANCE OF EACH SHIPMENT. CONTRACTOR MUST NOTIFY COGNIZANT DCMA QAR 30 DAYS PRIOR TO DELIVERY OF MATERIAL FOR PRODUCT VERIFICATION TESTING TO BE SCHEDULED. REFERENCE NUMBER: CQC20 REFERENCE NUMBER: CQC05 REFERENCE NUMBER: CQ009 REFERENCE NUMBER: CQC04 REFERENCE NUMBER: CS001 REFERENCE NUMBER: ZD025 REFERENCE NUMBER: CS086 REFERENCE NUMBER: A1202 WAIVED SOURCE FOR FIRST ARTICLE TESTING (19204) JMTC SPECS/STD/DRAWINGS: I/A/W DRAWING NR 19200 8448342 REFNO DTD 09 OCT 19 AMEND NR DTD 09 SEP 09 TYPE NUMBER: I/A/W QAP 19200 12993884 REFNO DTD 06 OCT 06 AMEND NR B DTD 05 AUG 10 TYPE NUMBER: I/A/W DRAWING NR 19200 L2S3025 REFNO DTD 08 APR 07 AMEND NR D4 DTD 02 MAY 03 TYPE NUMBER: I/A/W DRAWING NR 19204 8448342 REFNO DTD 08 OCT 31 AMEND NR R DTD 08 OCT 07 TYPE NUMBER: I/A/W DRAWING NR 19204 8448342 REFNO DTD 08 NOV 04 AMEND NR E DTD 08 APR 24 TYPE NUMBER: I/A/W DRAWING NR 19200 12579607 REFNO DTD 10 SEP 14 AMEND NR C DTD 09 AUG 04 TYPE NUMBER: I/A/W DRAWING NR 19200 L10S3059 REFNO DTD 10 JUL 07 AMEND NR DTD 10 JUL 01 TYPE NUMBER: PREP FOR DELIVERY LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999 QUP = 001: PRES MTHD = 41: CLNG/DRY = 1: PRESV MAT = 0 WRAP MAT = 00: CUSH/DUNN MAT = 00: CUSH/DUNN THKNESS = 0: UNIT CONT = BV: OPI = P: INTRMDTE CONT = DO: INTRMDTE CONT QTY = AAA: PACK CODE = U: MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE: 00 - No special marking PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV A DATED 04090 ****************************************************************************** GLOSSARY ****************************************************************************** PACKAGING TEXT THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT: For all shipments of packaged materiel to the government, which includes either Depot (DLA-Direct) or DVD (Customer- Direct) shipments, both DoD linear and two-dimensional (2D) bar code markings are required on Military Shipping Labels in accordance with MIL-STD-129, Revision P, dated December 15, 2002 (but see DLAD 52.211-9010(D) for exceptions to the requirement for MSL and 2D symbols). See the DLA packaging web site identified in DLAD 52.211-9010(E) for change notices to MIL-STD-129P that apply. 2D bar coding shall be in accordance with ISO/IEC 15438, ISO/IEC 15434 (ANSI MH10.8.3) and DoD 4500.9-R. MSL linear (code 3 of 9 or code 39) bar coding shall be in accordance with ISO/IEC 16388. Shipping label stock quality shall meet MIL-PRF-61002. Bar code print quality shall meet ANSI MH10.8-2000 or ANSI X3.182-1990 (R2000) for applicable 2D and/or linear bar codes. All DVD shipments shall meet additional linear bar coding requirements in DLAD 52.211-9010(C). Except for the Transportation Control Number (TCN), which must always be present on the Military Shipping Label, when the contract/order omits any other data elements as defined in MIL-STD-129P and if the information is not available from the Administrative Contracting Office, then the field is not required as part of the Military Shipping Label and may be left blank. If there are inconsistencies between the schedule and MIL-STD-129P, the schedule takes precedence. ITEM DESCRIPTION TEXT REFERENCE NUMBER CQC20: THE INTERNATIONAL ORGANIZATION FOR STANDARDIZATION (ISO) 9002 OR A "TAILORED" PROGRAM MEETING THE FOLLOWING ISO 9002 PARAGRAPHS APPLIES: 4.5, DOCUMENT CONTROL: LIMITED TO INSPECTION AND TESTING AS WELL AS APPLICABLE DRAWINGS, SPECIFICATIONS AND INSTRUCTIONS REQUIRED BY CONTRACT 4.6, PURCHASING: 4.6.1 AND LIMITED TO 4.6.2 A) AND 4.6.4.2, ALL OTHER PARTS OF PARAGRAPH ARE HEREBY DELETED 4.7, CUSTOMER-SUPPLIED PRODUCT: 4.8, PRODUCT IDENTIFICATION & TRACEABILITY: 4.10, INSPECTION & TESTING: 4.11, INSPECTION, MEASURING & TEST EQUIPMENT: 4.12, INSPECTION AND TEST STATUS: 4.13, CONTROL OF NONCONFORMING PRODUCT: 4.14, CORRECTIVE AND PREVENTIVE ACTION: PARAGRAPH 4.14.3 APPLY TO PRODUCT ONLY 4.16, QUALITY RECORDS: FAR CLAUSE 52.246-11 APPLIES REFERENCE NUMBER CQC05: DLAD CLAUSE 52.246-9004,PRODUCT VERIFICATION TESTING,IS HEREBY INCORPORATED,AND MAY BE INVOKED AT THE DISCRETION OF THE PROCUREMENT ACTIVITY. REFERENCE NUMBER CQ009: IF AQLS ARE LISTED IN THE SPECIFICATION(S) OR DRAWING(S) THEY MAY BE USED TO ESTABLISH THE AUTHORIZED SAMPLE SIZE,HOWEVER,THE ACCEPTANCE NUMBER FOR THIS CONTRACT IS ZERO;I.E.,THIS CONTRACT REQUIRES A SAMPLING PLAN THAT ACCEPTS ON ZERO DEFECTS AND REJECTS ON ONE OR MORE DEFECT(S). REFERENCE NUMBER CQC04: DLAD 52.246-9003, MEASURING AND TEST EQUIPMENT, APPLIES. REFERENCE NUMBER CS001: THIS ITEM HAS TECHNICAL DATA THAT IS SUBJECT TO EXPORT CONTROL REGULATIONS, OR THE ITEM HAS NO TECHNICAL DATA BUT IT IS LISTED ON THE UNITED STATES MUNITIONS LIST (USML) OR THE COMMERCE CONTROL LIST (CCL), AND IT IS THEREFORE CONTROLLED FOR EXPORT BY THE INTERNATIONAL TRAFFIC IN ARMS REGULATION (ITAR) OR EXPORT ADMINISTRATION REGULATION (EAR). (SEE DFARS CLAUSE 252.204-7008.) DISTRIBUTION OF THE TECHNICAL DATA AND ELIGIBILITY FOR AWARD ARE LIMITED TO THOSE SUPPLIERS QUALIFIED THROUGH JCP CERTIFICATION, OR TO THOSE LICENSED BY EITHER THE DEPARTMENTS OF STATE OR COMMERCE; OR TO FOREIGN SUPPLIERS PURSUANT TO INTERNATIONAL AGREEMENTS. TO APPLY FOR JCP CERTIFICATION, COMPLETE DD FORM 2345, "MILITARY CRITICAL TECHNICAL DATA AGREEMENT," FORM IS AVAILABLE AT THE WORLD WIDE WEB ADDRESS: HTTP://WWW.LOGISTICSINFORMATIONSERVICE.DLA.MIL/J CP/, OR BY WRITING TO: UNITED STATES/CANADA JOINT CERTIFICATION OFFICE DLA LOGISTICS INFORMATION SERVICE FEDERAL CENTER 74 WASHINGTON AVE., NORTH BATTLE CREEK, MI 49017-3084 TO MANUFACTURE THIS ITEM, NON-JCP CERTIFIED SUPPLIERS MUST SUBMIT A CURRENT MANUFACTURING LICENSE AGREEMENT, TECHNICAL ASSISTANCE AGREEMENT, DISTRIBUTION AGREEMENT OR OFF-SHORE PROCUREMENT AGREEMENT APPROVED BY THE DIRECTORATE OF DEFENSE TRADE CONTROLS WITH THE OFFER, UNLESS AN EXEMPTION UNDER THE PROVISIONS OF ITAR SECTION, 125.4 "EXEMPTIONS OF GENERAL APPLICABILITY," AND/OR EAR PART 740 ARE APPLICABLE. NON-JCP CERTIFIED SUPPLIERS SEEKING EXPORT CONTROLLED TECHNICAL DATA ARE REQUIRED TO PROVIDE THE CONTRACTING OFFICER WITH AN APPLICABLE AGREEMENT OR IDENTIFY WHICH ITAR/EAR EXEMPTION APPLIES TO RECEIVE A COPY OF THE EXPORT CONTROLLED TECHNICAL DATA. NOTE: SUPPLIERS ARE REQUIRED TO IDENTIFY SUB-CONTRACTORS AT TIME OF QUOTING IF KNOWN. USE OF ANY SUB-CONTRACTOR SUPPLIER WILL REQUIRE JCP CERTIFICATION APPROVAL. REFERENCE NUMBER ZD025: MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL NOT BE INTENTIONALLY ADDED TO,OR COME IN DIRECT CONTACT WITH,ANY HARDWARE OR SUPPLIES FURNISHED UNDER THIS CONTRACT. REFERENCE NUMBER CS086: THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH MUST MEET QPL/QML SPECIFICATIONS.BY SUBMITTING AN OFFER, THE OFFEROR AGREES TO PROVIDE QPL/QML COMPONENTS ONLY FROM SOURCES QUALIFIED ON THE APPLICABLE QPL(S)/QML(S). REFERENCE NUMBER A1202: CASTING/FORGING MAY BE REQUIRED TO MANUFACTURE THIS NSN. IF A CASTING/FORGING IS REQUIRED, TOOLING IS TYPICALLY INVOLVED. THE GOVERNMENT MAY NOT HAVE THIS SPECIAL TOOLING. ASSISTANCE WITH FORGING AND CASTING SOURCES MAY BE FOUND AT THE WEB SITE BELOW. http://www.aviation.dla.mil/ExternalWeb/UserWeb/ AviationEngineering/Engi neering/valueengineering/AFCAT/AFCAT.asp
Web Link: FBO.gov Permalink
(https://www.fbo.gov/spg/DLA/J3/DSCC-BSM/1010-00-181-3413/listing.html)
Place of Performance: Address: DLA LAND AND MARITIME, 3990 EAST BROAD STREET, COLUMBUS, Ohio, 43218, United States; Zip Code: 43218
Record: SN02716390-W 20120408/120406235052-9ef68b125a13452bdd417b6aa00dec02 (fbodaily.com)
Source: FedBizOpps Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's FBO Daily Index Page |

Loren Data's SAM Daily™

10 -- SEAR STEEL