SOLICITATION NOTICE
99 -- Rugged Data Acquisition Systems
- Notice Date
- 3/26/2012
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 334419
— Other Electronic Component Manufacturing
- Contracting Office
- MICC Center - Yuma Proving Ground, KO Directorate of Contracting, 301 C Street BLDG 2100 RM 8, Yuma, AZ 85365-9498
- ZIP Code
- 85365-9498
- Solicitation Number
- W9124R-12-T-0017
- Response Due
- 4/2/2012
- Archive Date
- 6/1/2012
- Point of Contact
- LaTasha A. Isaac, 928-328-6162
- E-Mail Address
-
MICC Center - Yuma Proving Ground
(latasha.a.isaac.civ@mail.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. Combined Synopsis Solicitation Solicitation No: W9124R-12-T-0017 This is a Combined Synopsis/Solicitation (CSS) for commercial items prepared in accordance with the format in Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation. Quotes are being requested and a written solicitation will not be issued. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular Fac 2005-57, Effective 02 March 20112 and Defense Federal Regulation Supplement (DFARs), current to DPN 20120312 (Effective 15 March 2012) Edition. It is the responsibility of the contractor to be familiar with the applicable provisions and clauses which can be accessed in full text at www.farsite.hill.af.mil. This solicitation is issued as a Request for Quotations (RFQ) under Solicitation Number W9124R-12-T-0017. This action is solicited as a 100% small business set-aside. The North American Industry Classification System (NAICS) code is 334419 with a size standard of 500 employees. T his action is solicited as Brand Name or Equal pursuant to FAR 52.211-6. Per FAR 52.212-2, the Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be the most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers: technical capability of the item offered to meet the government required and price. All quotes shall include shipping costs to USAYPG Yuma, Arizona 85365-9498. Arizona vendors are to include Arizona Privilege Tax. The United States Army Yuma Proving Ground (USAYPG), Yuma, Arizona is requesting quotes for a Rugged Data Acquisition Systems. The manufacturer of the Brand Name or equal items being solicited is DEWETRON, Inc. 10 High Street, STE K Wakerfield, RI 02879. Offerors proposing to furnish other than brand name items being solicited shall provide sufficient technical literature to enable the Government to determine that the proposed items meet or exceed all the minimum salient characteristics of the brand name being solicited (Ref FAR Provision 52.211-6). Offerors must provide the Unit Price, Total Price, and Total Extended Price for all Contract Line Item Numbers (CLINs). The quote shall consist of one Contract Line Item Number (CLIN) as follows: CLIN 0001 quantity of one (1) each DEWE-501-A, CLIN 0002 quantity of one (1) each DEWE-501-PCI-64-A, CLIN 0003 quantity of one (1) each ORION -3222-101, CLIN 0004 quantity of one (1) each ORION-3222-100, CLIN 0005 quantity of four (4) each MDAQ-BASE-5, CLIN 0006 quantity of eight (8) each MDAQ-SUB-ACC-BNC, CLIN 0007 quantity of four (4) each MADQ-AAF4-5-BU-S2, CLIN 0008 quantity of two (2) each 510-DC-12V, CLIN 0009 quantity of two (2) each BAT-95WH, CLIN 0010 quantity of one (1) each MOB-DISP-12A, CLIN 0011 quantity of one (1) each DEWE_DCDC-24-300-ISO, CLIN 0012 quantity of one (1) each GPS-CLOCK-INT, CLIN 0013 quantity of one (1) each DS-7-DSA, CLIN 0014 quantity of one (1) each DS_OPT-CAN and Warranty -EXT-12-24. Payment will be made by Government Wide Area Work Flow (WAWF). Salient Characteristics This data acquisition system shall be capable of operating in the climate of the Sonoran Desert at high ambient temperatures with blowing dust and sand. It shall be capable of acquiring 64 channels of data from a variety of sensor types such as analog voltages, analog video (composite), Rs-232 GPS data and accomplishing all of the data acquisition synchronously to the same data file for later analysis. Software shall be included with the capability for 128 channels of data analysis. The system shall also operate in various types of automotive vehicles (military) from batteries that are internal to the data acquisition system and are removable one at a time without affecting system operation in any way (hot swappable). This system shall be expandable to 128 data channels with the addition of an identical size system with no loss of data synchronization. This specification is for procurement of a 64 channel system and it's expansion system. Maximum Dimensions: Each 64 channel system shall have a maximum width of 18inches, depth of 9 inches and height of 8 inches. Environmental: Temperature: Minimum operating temperature range of zero to plus 50 degrees Celsius. Shock: The system shall be fully operational while in all three axis of x, y, z the system is subjected to 500 G of shock 2 millisecond duration half-sine pulse in groups of 3 pulses. Vibration: The system shall be fully operational while being subjected to vertical vibration of changing frequency sweeping from 10 Hz to 500 Hz with a 3 G magnitude at a sweep rate of 1 octave per minute. Signal Input Capabilities: TEDS sensors shall be supported. Dynamic Signal Inputs: Must be capable of recording 64 dynamic (AC) signals using removable plug-in signal conditioners. System must provide 64-channel strain gage / voltage input with the following measure modes: full bridge, bridge, bridge 120 Ohm, bridge 350 Ohm or voltage input. Full bridge sensors 120 Ohm to 10 kOhm. Internal completion shall be used for bridge and bridge sensors. There shall be 14 programmable ranges for strain gages from 0.5 to 1000 mV/V (@ 10 V excitation). In voltage mode there shall be 15 programmable ranges from 5 mV to 10 V with a basic accuracy 0.05 %, bandwidth DC to 30 kHz with programmable excitation voltage from 0 to 12 VDC. The systems shall also accept signals from modular signal conditioning adapters with model numbers MSI-BR-ACC IEPE/ICP accelerometer signal conditioner (quantity of 36), MSI-BR-TH-K thermocouple type k signal conditioner(quantity of 10) and MSI-BR-V-200 +/- 200 volt signal input adapter(quantity of 6) available from Dewetron, Inc. and automatically identify them using TEDS with the supplied software in order to automatically configure the system for proper data acquisition operation. Video Input: The system shall be compatible with a USB camera, and must be able to record video images continuously along with the dynamic and static signal inputs described above. Video shall be replayed with the sensor data on the same screen using the supplied software. Video and sensor data shall be exportable to an AVI file from the analysis mode of the software. GPS satellite: The system shall include a GPS receiver that shall provide a synchronized internal clock source for A/D cards. Freq range: 1 to 10 MHz PPS synchronization. Having an accuracy of 250 ns PPS synchronization accuracy. The free-running, no GPS satellites in use, clock accuracy shall be <0.5 ppm. The GPS receiver shall provide four programmable TTL clock outputs. Signal filtering: The system shall be capable of filtering 64 channels with a 4-pole filter using 5 selectable filters: 10100 Hz, 1k, 10k, 20 kHz and having the bypass characteristics of a Butterworth filter with gain = 1 using a single ended input and output DC accuracy of 0.02 % with a cutoff frequency that is -3 dB 1.5 dB. Input Setup User Interface and Capabilities: The system must provide a graphical user interface for setup and control of all operating parameters. These include, at a minimum: Input calibration/scaling to engineering units, either by direct numeric scale entry, or via push-button calibration to incoming high and low calibration signals. System must also provide push-button calibration to incoming AC calibration signals via an RMS calibration function. Selection of which input signals to monitor and record, selection of sample rate from all available possibilities, trigger level(s), and pre/post trigger parameters. Set-up and monitoring of high/low alarm levels for each input. The option to save all setup parameters, including scaling and input calibration to an unlimited number of configuration files. The system must allow for saving and reloading of configuration files in the future in order to reduce setup time. Set-up and monitoring of mathematically derived channels using a high-level formula builder. Single and multi-channel operations must be possible, such as multiplying two channels together, and applying algebraic and logic functions. In addition, constants must be able to be defined and used within the expressions. The following Clauses and Provisions are incorporated by reference and apply to this acquisition. FAR 52.212-1 Instructions to Offerors -- Commercial Items (Jun 2008), NOTE: In order to complete the Representations and Certification for the following referenced provisions, you must go to the following website at http://farsite.hill.af.mil/Vffar1.htm, locate the referenced provision, copy and paste it to a word document and complete FAR 52.212-3 Offeror Representations and Certifications -- Commercial Items (May 2012), with Alternate I (April 2011) and DFARS 252.212-7000 Offer Representations and Certifications- Commercial Items (June 2005). An offeror shall complete only paragraph (b) of FAR 52.212-3 if the offeror has completed the annual representations and certifications electronically at the Online Representations and Certification Application (ORCA) website at http://orca.bpn.gov/. FAR 52.212-4 Contract Terms and Conditions - Commercial Items (Feb 2012) applies to this acquisition Addenda's attached are: FAR 52.247-34 FOB Destination (Nov 1991). FAR 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Order Commercial Items (Mar 2012) applies to this acquisition. Specific clauses cited in FAR 52.212-5 that are applicable to this acquisition are: FAR 52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards (Feb 2012). FAR 52.209-6 Protecting the Government's Interest when Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment (Dec 2010), FAR 52.219-6 Notice of Total Small Business Aside (Nov 2011), FAR 52.219-28 Post-Award Small Business Program Representation (Apr 2009), FAR 52.222-3 Convict Labor (Jun 2003), FAR 52.222-19 Child Labor - Cooperation with Authorities and Remedies (March 2012), FAR 52.222-21 Prohibition of Segregated Facilities (Feb 1999), FAR 52.222-26 Equal Opportunity (Mar 2007), FAR 52.222-35 Equal Opportunity for Veterans (Sep 2010), FAR 52.222-36 Affirmative Action for Workers With Disabilities (Oct 2010), FAR 52.222-37 Employment Reports on Veterans (Sep 2010), FAR 52.223-18 Encouraging Contractor Policies to Ban Text Messaging While Driving Contractor (Aug 2011), FAR 52.225-13 Restrictions on Certain Foreign Purchases (Jun 2008), FAR 52.232-33 Payment by Electronic Funds Transfer-Central Contractor Registration (Oct. 2003 ), FAR 52.252-2 Clauses Incorporated By Reference (Feb 1998), DFARS 252.212-7000 Offeror Representations and Certifications--Commercial Items (Jun 2005), DFARS 252.225-7000 Buy American Act-- Balance Of Payments Program Certificate (Dec 2009), DFARS 252.212-7001Contract Terms and Conditions Required to Implement Statutes of Executive Orders Applicable to Defense Acquisitions of Commercial Items (Mar 2012), DFARS 252.203-7000 Requirements Relating to Compensation of former DOD Officials (Sep 2011), DFARS 252.225-7001Buy American Act - Balance of Payments Program (OCT 2011), DFARS 252.232-7003 Electronic Submission of Payment,(10 U.S.C. 2410) (Mar 2008), DFARS 252.247-7023 Transportation of Supplies by Sea (May 2002)(10 U.S.C 2410), Alternate III (MAY 2002) of 252.247-7023, DFARS 252.211-7003 Item Identification and Validation (Jun 2011), DFARS 252.232-7010 Levies on Contract Payments (Dec 2006). Deviation 2012-00004 Class Deviation - Prohibition Against Contracting With Corporations That Have an Unpaid Delinquent Tax Liability or a Felony Conviction under Federal Law 252.209-7999 Representation by Corporations Regarding an Unpaid Delinquent Tax Liability or a Felony Conviction under any Federal Law. REPRESENTATION BY CORPORATIONS REGARDING AN UNPAID DELINQUENT TAX LIABILITY OR A FELONY CONVICTION UNDER ANY FEDERAL LAW (DEVIATION 2012-00004) (JAN 2012) (a) In accordance with sections 8124 and 8125 of Division A of the Consolidated Appropriations Act, 2012, (Pub. L. 112-74) none of the funds made available by that Act may be used to enter into a contract with any corporation that- (1) Has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability, where the awarding agency is aware of the unpaid tax liability, unless the agency has considered suspension or debarment of the corporation and made a determination that this further action is not necessary to protect the interests of the Government. (2) Was convicted of a felony criminal violation under any Federal law within the preceding 24 months, where the awarding agency is aware of the conviction, unless the agency has considered suspension or debarment of the corporation and made a determination that this action is not necessary to protect the interests of the Government. (b) The Offeror represents that- (1) It is [ ] is not [ ] a corporation that has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability, (2) It is [ ] is not [ ] a corporation that was convicted of a felony criminal violation under a Federal law within the preceding 24 months. (End of provision) MICC/Local Clauses: AMC-Level Protest Program (Nov 2008) If you have complaints about this procurement, it is preferable that you first attempt to resolve those concerns with the responsible contracting officer. However, you can also protest to Headquarters, AMC. The HQ, AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 20 working days from filing. To be timely, protests must be filed within the periods specified in FAR 33.10. If you want to file a protest under the AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. All other agency-level protests should be sent to the contracting officer for resolution. HQ Army Material Command Office of Command Counsel 9301 Chapek Rd, Room 2-1SE3401 Ft. Belvoir, VA 22060-5527 Facsimile number (703) 806-8866 or 8875 Packages sent by FedEx or UPS should be addressed to: HQ Army Material Command Office of Command Counsel Room 2-1SE3401 1412 Jackson Loop Ft. Belvoir, VA 22060-5527 The AMC-Level Protest procedures are found at: http://www.amc.army.mil/pa/COMMANDCOUNSEL.asp. If internet access is not available, contact the contracting officer or HQ, AMC to obtain the AMC Level Protest Procedure. This RFQ closes on Thursday, 2 April 2012 at 8:00AM Mountain Standard Time (MST). Responses to the RFQ shall be submitted by the closing date indicated in the CSS to the Point of Contact identified below. All responding vendors must be actively registered with the Central Contractor Registration (CCR) prior to award of contract. Information to register in CCR can be found at http://www.ccr.gov/(https://www.bpn.gov/ccr/default.aspx).
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/99812e14359d4910f954aec17a267f81)
- Place of Performance
- Address: MICC Center - Yuma Proving Ground KO Directorate of Contracting, 301 C Street BLDG 2100 RM 8 Yuma AZ
- Zip Code: 85365-9498
- Zip Code: 85365-9498
- Record
- SN02705212-W 20120328/120326234238-99812e14359d4910f954aec17a267f81 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |