SOURCES SOUGHT
20 -- DRYDOCK 87 FOOT CUTTERS
- Notice Date
- 11/8/2011
- Notice Type
- Sources Sought
- NAICS
- 336611
— Ship Building and Repairing
- Contracting Office
- Department of Homeland Security, United States Coast Guard (USCG), USCG Surface Forces Logistics Center (SFLC) Procurement Branch 1, 300 East Main Street, Suite 600, Norfolk, Virginia, 23510-9102, United States
- ZIP Code
- 23510-9102
- Solicitation Number
- D8_87_Foot_PatrolBoat
- Point of Contact
- Nancy M Brinkman, Phone: 757-628-4579, Louis J Romano, Phone: (757)628-4651
- E-Mail Address
-
Nancy.M.Brinkman@uscg.mil, louis.j.romano@uscg.mil
(Nancy.M.Brinkman@uscg.mil, louis.j.romano@uscg.mil)
- Small Business Set-Aside
- N/A
- Description
- The U.S. Coast Guard is considering whether or not to set aside an acquisition for HUBZone concerns, Service-Disabled Veteran-Owned Small Business concerns (SDVOSB), or for Small Business concerns. The small business size standard for NAICS 336611 is less than 1,000 employees. The acquisition is to perform drydock and repairs to the CGC BONITO (WPB-87341) and CGC SEAHAWK (WPB-87323) both 87' Work Patrol Boats. The government may award one or separate contracts as a result of the solicitation. Contractors will be allowed to submit quotes for one or both vessels. The vessels are geographically restricted to a facility located within an area no greater than 492 nautical miles one-way and 984 nautical miles roundtrip from Pensacola, Florida. The USCGC BONITO's homeport is Pensacola, Florida and USCGC SEAHAWK's homeport is Carrabelle, Florida. The average anticipated Period of performance is forty-five (45) calendar days and is as follows: USCGC BONITO, January 25, 2012 - March 9, 2012 USCGC SEAHAWK, April 4, 2012 - May 18, 2012 The scope of the acquisition is for the overhauling, renewing and repairing of various items aboard the CGC BONITO and CGC SEAHAWK. This work may include, but is not limited to: 1. Perform Ultrasonic Thickness Measurements 2. Bilge Surfaces (Engine Room), Preserve 3. Bilge Surfaces (Mess Deck), Preserve (Partial) 4. Dirty Oil Tank, Clean and Inspect 5. Oily Water Tank, Clean and Inspect 6. Tanks (MP Fuel Service), Clean and Inspect 7. Pilothouse Deck (Aluminum), Inspect, Preserve, and Renew Electrical Matting 8. Depth Sounder, Capastic Fairing, Renew 9. Main Engine/Reduction Gear, Realign 10. Propulsion Shafts, Remove, Inspect, and Reinstall 11. Propulsion Shaft, Repair 12. Propulsion Shaft, Straighten 13. Intermediate Water-Lubricated Propulsion Shaft Bearing, Renew 14. Aft Water-Lubricated Propulsion Shaft Bearing, Renew 15. Intermediate Bearing Carrier, Renew 16. Aft Bearing Carrier, Renew 17. Stern Tube, Interior Surfaces, Preserve 100 percent 18. Stern Tube, Interior Surfaces, Repair 19. Propellers, Remove, Inspect, and Reinstall 20. Propeller, Minor Reconditioning and Repairs, Perform 21. Fathometer Transducer, Renew 22. Speed Log, Skin Valve Assembly, Clean and Inspect 23. Sea Water System (Sea Valves, Strainers, Piping), Clean, Inspect, and Repair 24. Rudder Assemblies, Remove, Inspect and Reinstall 25. RHIB Notch Skid Pads, Inspect 26. RHIB Notch Skid Pad Studs, Renew 27. Stern Launch Door, Remove, Inspect and Reinstall 28. Grey Water Holding Tank, Clean and Inspect 29. Sewage Holding Tank, Clean and Inspect 30. Grey Water Piping, Clean and Flush 31. Sewage Piping, Clean and Flush 32. Under Water Body, Preserve 100 percent 33. Under Water Body, Preserve Partial - 33 percent 34. Cathodic Protection, Zincs, Renew 35. Drydocking 36. Temporary Services, Provide 37. Telephone Service, Provide 38. Ventilation System, Engine Room Supply and Exhaust Fan Assemblies, Clean and Inspect, Preserve All welding and brazing shall be accomplished by trained welders, who have been certified by the applicable regulatory code performance qualification procedures. In accordance with FAR 19.502, 19.1305 and FAR 19.1405, if your firm is a small business, HUBZone certified or a Service-Disabled Veteran-Owned Small Business and intends to submit an offer on this acquisition, please respond via in a letter either by e-mail to nancy.m.brinkman@uscg.mil or by fax at (757) 628-4676. Your response you must include the following: (a) A positive statement of your intention to submit a quote for this solicitation as a prime contractor (b) A written statement, on letterhead, from each potential joint venture member expressing interest to enter into a joint venture agreement and to submit an offer as a joint venture. (c) The name of the cutter(s) which you intend to submit a quote. (d) Evidence of experience in work similar in type and scope to include contract numbers, project titles, dollar amounts, points of contact and telephone numbers; (d) past performance references with points of contact and telephone numbers. At least two references are requested, but more are desirable. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Your response is due on 16 November 2011, at 10:00 a.m. Eastern Standard Time. All of the above must be submitted in sufficient detail for a decision to be made on a HUBZone, Service Disabled Veteran-Owned Small Business set aside, or Small Business set-aside. Failure to submit all information requested may result in an unrestricted acquisition. A decision on whether this will be pursued as a HUBZone, SDVOSB set-aside, or small business set-aside, will be posted in the Fedbizopps website at http://www.fedbizopps.gov. Questions may be referred to Nancy Brinkman at (757) 628-4579.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DHS/USCG/COUSCGMLCA/D8_87_Foot_PatrolBoat/listing.html)
- Record
- SN02619778-W 20111110/111108234359-74cd91681e6d2342982aaf9e48210810 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |