MODIFICATION
34 -- 48" HEMISPHERICAL DOMES
- Notice Date
- 10/31/2011
- Notice Type
- Modification/Amendment
- NAICS
- 333518
— Other Metalworking Machinery Manufacturing
- Contracting Office
- NASA/Lyndon B. Johnson Space Center, Houston Texas, 77058-3696, Mail Code: BH
- ZIP Code
- 00000
- Solicitation Number
- NNJ12412324Q
- Response Due
- 11/7/2011
- Archive Date
- 10/31/2012
- Point of Contact
- Rhiannon Gabel, Contract Specialist, Phone 281-244-6708, Fax 281-244-5331, Email Rhiannon.gabel@nasa.gov - LaToy J. Jones, Contracting Officer, Phone 281-244-8023, Fax 281-483-4066, Email latoy.j.jones@nasa.gov
- E-Mail Address
-
Rhiannon Gabel
(Rhiannon.gabel@nasa.gov)
- Small Business Set-Aside
- Total Small Business
- Description
- THIS NOTICE CONSTITUTES AMENDMENT NO. 1 TO THE COMBINED SYNOPSIS/RFQ FOR 48'HEMISPHERICAL DOMES. Companies shall acknowledge all amendment(s) in their quote. Thisnotice serves as the official amendment to subject synopsis/RFQ and a written amendmentwill not be issued.The purpose of this amendment is to:1) change the selection criteria to include past performance. Changes to the selectioncritera can be found at: http://procurement.jsc.nasa.gov/NNJ12412324/Solicitation-Amd-1.docx 2) answer questions received from industry.3) update JSC drawing #36153711. The updated drawing can be found at:http://procurement.jsc.nasa.gov/NNJ12412324/TANK-Revised.pdf QuestionsQ1:What is the diameter of the hole shown at the top of the dome? A1:The hole is required to be less than 2 and can be as small as 1/8 inch (see updateddrawing).Q2:Is the height of the dome 24.000 inches? A2:Yes. Q3:For the height of the dome, can we have a tolerance of greater than +/-0.010? A3:Yes, the drawing has been updated to allow +/-0.020 inches (see updated drawing) Q4:If the dimension of the base is 48.000 +/-0.010 and height is 24.000 +???, is there atolerance on the radius other than at those 2 locations? A4:The tolerance would be the same as the top, 24.000 +/-0.020. Q5:Is it required that the dome be manufactured from 1 continuous sheet of aluminum? A5:Yes. It is required that the hemi be 1 continuous sheet of parent material, withoutany fusion welds.Q6:Can the dome be welded from multiple pieces? A6:It is required that the hemi be 1 continuous sheet of parent material, without anyfusion welds.Q7:Can the dome be bolted together from multiple pieces? A7:The domes cannot be bolted together. These domes are for a pressure vessel.Q8:Can you provide a description of the application? A8:These domes are for a pressure vessel. The due date for receipt of offers is extended to 1:00 p.m. local time on November 7,2011. Companies shall provide the information stated in the synopsis/RFQ posted on the NASAAcquisition Internet Service (NAIS) on October 21, 2011. Documents related to thisprocurement are available over the Internet. These documents reside on a World Wide Web(WWW) server which may be accessed using a WWW browser application. The Internet site, orURL, for the NASA/JSC Business Opportunities home page ishttp://prod.nais.nasa.gov/cgi-bin/eps/bizops.cgi?gr=D&pin=73
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/NASA/JSC/OPDC20220/NNJ12412324Q/listing.html)
- Record
- SN02615079-W 20111102/111031233858-067ac300ec2edd9b9a169affbd8258a0 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |