Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
FBO DAILY ISSUE OF AUGUST 19, 2011 FBO #3555
SOURCES SOUGHT

44 -- High Temperature Hydrogen Furnace with Optional High Vacuum Operation

Notice Date
8/17/2011
 
Notice Type
Sources Sought
 
NAICS
332811 — Metal Heat Treating
 
Contracting Office
Department of Energy, SLAC National Accelerator Lab, SLAC National Accelerator Lab, 2575 Sand Hill Road, Menlo Park, California, 94303, United States
 
ZIP Code
94303
 
Solicitation Number
SLAC_166836(LL)
 
Archive Date
9/2/2011
 
Point of Contact
Lorenza S. Ladao,
 
E-Mail Address
lladao@SLAC.stanford.edu
(lladao@SLAC.stanford.edu)
 
Small Business Set-Aside
N/A
 
Description
SLAC seeks vendors that can provide the following: (1) 1 EACH BRAND NAME OR EQUAL: CAMCO Furnace Model J-12-1860 High Temperature Hydrogen Furnace with Optional High Vacuum Operation with the following salient characteristics: Type: Coldwall, Vertical Bell Maximum Temperature: 1200 Degrees C. Hot Zone: 18" (45 cm) Dia. x 60" (152 cm) H. Nominal Frame Dimension: 54" (137 cm) W. x 34" (86 cm) D x 145" (360 cm) H Power Requirements: 480V 3Ph. 175A 60Hz 380/400/415V 3Ph. 200A 50Hz Gas Requirements: 25-50 psig, regulated, clean dry Nitrogen 25-50 psig, regulated, clean dry Hydrogen. Roughing Pump: Dry Scroll Pump: Varian Triscroll 600, or equivalent High Vacuum Pump: Turbo Pump: 1600 Lps Varian pump, or equivalent. Pumping Requirements: 10E-7 torr 2 hours of ambient :10E-6 torr at 1000°C within 2 hours. Thermocouple: Type C Tungsten/Thenium Vacuum level: 9.0E-6 torr at temperature, 9.0E-7 at ambient Heating Zones: 3 independently controlled, 1 master, 2 slave Element Style:.125 Dia. Molybdenum rod, aprox 60' per zone (180') Gas flow during operation: 10 CFH minimum to 75 CFH Maximum Paperless data acquisition recorder: Yokogawa model DX1012, 12 channel recorder SCR power control: Watlow Power Series SCR controller, 3 in total Bubbler for humidification of process gas : -60 to +25 deg C operation Heated bubbler optional for higher dewpoint operation. Chamber construction: 304 / 316 Stainless steel Gas and Vacuum plumbing: 304 / 316 Stainless steel, Swagelok, conflat and NW THIS IS NOT A REQUEST FOR QUOTE. VENDORS INTERESTED IN BEING CONSIDERED AS A POTENTIAL SOURCE SHOULD IDENTIFY THEMSELVES AS AN "INTERESTED PARTY" VIA THE FBO PORTAL. DO NOT CONTACT THE SUBCONTRACT ADMINISTRATOR.
 
Web Link
FBO.gov Permalink
(https://www.fbo.gov/spg/DOE/SLAC/STAN/SLAC_166836(LL)/listing.html)
 
Place of Performance
Address: SLAC NATIONAL ACCELERATOR LABORATORY, 2575 Sand Hill Road, Menlo Park, California, 95135, United States
Zip Code: 95135
 
Record
SN02537423-W 20110819/110817234856-617182e150c7c3196f78386c56654014 (fbodaily.com)
 
Source
FedBizOpps Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  Jenny in Wanderland!  © 1994-2024, Loren Data Corp.