MODIFICATION
10 -- M240L Medium Machine Gun (MMG)
- Notice Date
- 7/20/2011
- Notice Type
- Modification/Amendment
- Contracting Office
- US Army, Army Contracting Command, ACC New Jersey Contracting Center, Picatinny Arsenal, New Jersey 07806-5000
- ZIP Code
- 07806-5000
- Solicitation Number
- W15QKN-11-R-F004
- Response Due
- 8/12/2011
- Archive Date
- 8/11/2012
- Point of Contact
- Sergio Moraga, Contract Specialist, 973-724-2013
- E-Mail Address
-
Sergio Moraga
(sergio.moraga@us.army.mil)
- Small Business Set-Aside
- N/A
- Description
- All offerors, be advised that the Government has currently posted Amendment 0001 to the solicitation that addresses associated attachments. The purpose of this modification is to add: Attachment 13: ADDENDUM 1: TDP Contract C Requirements; Attachment 14: Drawing 12997499; and Attachment 15: ECP L11S2011, NOR 009 and NOR 015. These attachments are subject to the same restrictions as the Technical Data Package and are detailed within the solicitation. Additionally, below are Questions & Answers for offerer review. QUESTION:What additional information is covered within Addendum 1? ANSWER:Addendum 1: updates the QAP Verification Level for several compression springs; adds QAP clarifications for several components; deletes the associated Parts List for drawing 11826270; clarifies the correct material specifications for all drawings citing ASTM B221/B221M or ASTM B211/B211M; updates the heat treatment specification for several aluminum components; clarifies that reference drawing 12597044 has been removed from the TDP; reinstates drawing 12997499 into the TDP; clarifies the material for two polymer components; clarifies a component part number on drawing 13016494; and clarifies the specification for casting repair welding on drawing 13016514. QUESTION:The Contract C Requirements Engineering Exceptions received with the TDP package lists Reference Drawings (found on page 1) to be removed from the procurement. Drawing 12597044 was included in the list of drawings to be removed. However, on page 2 (item second from bottom of page) of Engineering Exceptions, changes are provided for drawing 12597044. Is drawing 12597044 to be included in the procurement or not? ANSWER:Drawing 12597044 is not included in this procurement, as clarified in Addendum 1. QUESTION:According to SAE-AMS-4985, the use of remelt and revert is Authorized by Purchaser. Purchaser is defined as the engineering organization responsible for casting design and fitness for use of the designee of this engineering organization. Based on this, will approval for authorization to utilize remelt and revert in accordance with SAE AMS4985 be granted? ANSWER:SAE-AMS-4895 permits the use of revert in the preparation of a master heat and permits solidification of a master heat into pigs or ingots before remelting and pouring of castings. SAE-AMS-4895 requires purchaser authorization if portions of two or more qualified master heats are remelted together and poured into castings. An offeror proposing to utilize such remelt should provide supporting technical, schedule and cost rationale. There have been no additional changes to the solicitation or to the closure date. The closure date is currently published as Friday August 12th 2011. Please continue to monitor this solicitation number for any applicable updates and any further information.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/a3d9b95fe6b6c9bf83921a0d600b8a5d)
- Record
- SN02504910-W 20110722/110721003203-a3d9b95fe6b6c9bf83921a0d600b8a5d (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |