PRESOL | 66 | Vessel Fuel Measurement and Management System - References

FBO DAILY ISSUE OF JULY 21, 2011 FBO #3526
SOLICITATION NOTICE

66 -- Vessel Fuel Measurement and Management System - References

Notice Date: 7/19/2011
Notice Type: Combined Synopsis/Solicitation
NAICS: 334513 — Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables
Contracting Office: Department of Commerce, National Oceanic and Atmospheric Administration (NOAA), Eastern Region Acquisition Division, Norfolk Federal Building, 200 Granby Street, Norfolk, Virginia, 23510
ZIP Code: 23510
Solicitation Number: EA133M-11-RQ-0957
Archive Date: 8/13/2011
Point of Contact: Christine Jeffries, Phone: 757-441-6894
E-Mail Address: christine.jeffries@noaa.gov
(christine.jeffries@noaa.gov)
Small Business Set-Aside: N/A
Description: Solicitation in MS Word Format Additional Reference Additional reference Additional reference Reference 2.6 Reference 2.5 Reference 2.4 Reference 2.1 Vessel Fuel Measurement and Management System This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with additional information included in this notice. THIS ANNOUNCEMENT CONSTITUTES THE ONLY SOLICITATION; QUOTES ARE BEING REQUESTED AND A WRITTEN SOLICITATION WILL NOT BE ISSUED. The Request for Quote (RFQ) number is EA133M-11-RQ-0957. The synopsis/solicitation constitutes a RFQ and incorporates provisions and clauses in effect through Federal Acquisition Circular 05-53. The RFQ is issued on an unrestricted basis. The associated North American Industry Classification System (NAICS) code is 334513, Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables, which has a corresponding size standard of 500 for fewer employees. The National Oceanic and Atmospheric Administration (NOAA), Eastern Region Acquisition Division located at 200 Granby Street, Norfolk, VA 23510, requires the following items: Item 0001: Provide six (6) each new Vessel Fuel Measurement and Management Systems (VFMMS) in accordance with the attached Statement of Work (SOW). Unit Price: $___________; Quantity: 6; Unit of Issue: Each; Extended Price $____________. Item 0002: Other Direct Costs. This item includes shipping charges for delivery of each VFMMS and travel reimbursement for training. Shipping charges are to be paid based on actual expenses incurred; invoices will be required to substantiate shipping charges. The ships that will receive the VFMMS are to be determined. Reimbursement of travel expenses shall be in accordance with the Federal Travel Regulation and FAR 31.205-46. For the purposes of this RFQ, the Government estimate for shipping and travel is provided as follows: Unit Price: $5,000.00; Quantity: 1; Unit of Issue: Lump Sum; Extended Price $5,000.00. Item 0003: Option Item. Contractor-provided installation of VFMMS in accordance with the attached SOW. Unit Price: $___________; Quantity: 1; Unit of Issue: Job; Extended Price $____________. Item 0004: Option Item. On-site support provided by the Contractor during installation accomplished by NOAA. Unit Price: $___________; Quantity: 1; Unit of Issue: Job; Extended Price $____________. Item 0005: Option Item. Travel expenses in support of items 0003 or 0004, if exercised. Travel expenses will be reimbursed in accordance with the Federal Travel Regulation and Federal Acquisition Regulation (FAR) 31.205-46. Provide the General and Administrative (G&A) Expense Rate applicable to travel: _________%. Unit Price: Estimated $5,000.00; Quantity: 1; Unit of Issue: Lump Sum; Extended Price: $____________ [G&A rate X $5,000.00]. The SOW entitled, "Vessel Fuel Measurement and Management System," is incorporated by reference and provided as an attachment to this RFQ. FAR and Commerce Acquisition Regulation (CAR) provisions and clauses that are included in this solicitation are denoted by the applicable acronyms. FAR clause 52.212-4, Contract Terms and Conditions--Commercial Items (JUN 2010) applies to this acquisition with the following addenda: 1. CAR 1352.201-70 CONTRACTING OFFICER'S AUTHORITY (APR 2010) (Reference 1301.602-170) 2. CAR 1352.209-73 COMPLIANCE WITH THE LAWS (APR 2010) (Reference 1309.507-2) 3. CAR 1352.209-74 ORGANIZATIONAL CONFLICT OF INTEREST (APR 2010) (Reference 1309.507-2) 4. CAR 1352.233-70 AGENCY PROTESTS (APR 2011) {Fill-in paragraph "b": Department of Commerce, NOAA, ERAD, Attn: Melissa Sampson, 200 Granby Street, 8th Floor, Norfolk, VA 23510; fill-in paragraph "c": U.S Department of Commerce, Senior Procurement Executive, 1401 Constitution Avenue NW Suite 6422, Washington DC 20230} 5. CAR 1352.246-70 PLACE OF ACCEPTANCE (APR 2010) (Reference 1346.503) The place of acceptance for the VFMMS will be on board each ship that receives a VFMMS; a determination regarding which ships within the fleet will receive the VFMMS has not been made. The place of acceptance for option items, if exercised, will be on board each ship that receives a VFMMS. 6. CAR 1352.201-72 CONTRACTING OFFICER'S REPRESENTATIVE (COR) (APR 2010) (a) Mr. Ted Fulton is hereby designated as the Contracting Officer's Representative (COR). The COR may be changed at any time by the Government without prior notice to the contractor by a unilateral modification to the contract. The COR is located at: 439 West York Street, Norfolk, VA 23510; Phone Number: 757-441-3484; e-mail: Ted.Fulton@noaa.gov. (b) The responsibilities and limitations of the COR are as follows: (1) The COR is responsible for the technical aspects of the contract and serves as technical liaison with the contractor. The COR is also responsible for the final inspection and acceptance of all deliverables and such other responsibilities as may be specified in the contract. (2) The COR is not authorized to make any commitments or otherwise obligate the Government or authorize any changes which affect the contract price, terms or conditions. Any contractor request for changes shall be referred to the Contracting Officer directly or through the COR. No such changes shall be made without the express written prior authorization of the Contracting Officer. The Contracting Officer may designate assistant or alternate COR(s) to act for the COR by naming such assistant/alternate(s) in writing and transmitting a copy of such designation to the contractor. (End of clause) 7. NOAA/ERAD INVOICES (APR 2011) Invoices may be submitted electronically to the COR; original invoices shall be submitted to the designated billing office as follows: Marine Operations Center Atlantic 439 West York Street Norfolk, VA 23510 An electronic copy of invoices shall be submitted to the Contracting Office identified in this RFQ. Payment will be made by NOAA Finance Systems Admin Branch, 20020 Century Boulevard, Germantown, MD 20874. (End of clause) 8. NOAA/AGO SCHEDULE OF DELIVERABLES The following is a schedule of all deliverables, including administrative deliverables, required during the period of performance of this contract: Item 0001, Vessel Fuel Measurement and Management System, QTY: 6, Due Date: December 31, 2011, Deliver To: TBD, Reference SOW paragraph 3. (End of clause) 9. FAR 52.217-7 OPTION FOR INCREASED QUANTITY-SEPARATELY PRICED LINE ITEM (MAR 1989) The Government may require the delivery of the numbered line item, identified in the Schedule as an option item, in the quantity and at the price stated in the Schedule. The Contracting Officer may exercise the option by written notice to the Contractor within two weeks prior to performance commencing. Delivery of added items shall continue at the same rate that like items are called for under the contract, unless the parties otherwise agree. (End of clause) 10. FAR 52.217-8 OPTION TO EXTEND SERVICES (NOV 1999) The Government may require continued performance of any services within the limits and at the rates specified in the contract. These rates may be adjusted only as a result of revisions to prevailing labor rates provided by the Secretary of Labor. The option provision may be exercised more than once, but the total extension of performance hereunder shall not exceed 6 months. The Contracting Officer may exercise the option by written notice to the Contractor within two weeks prior to contract expiration. (End of clause) END OF ADDENDUM TO FAR 52.212-4, CONTRACT TERMS AND CONDITIONS - COMMERCIAL ITEMS (JUN 2010). 11. 52.212-5 -- CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS -- COMMERCIAL ITEMS (MAY 2011) (a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (1) 52.222-50, Combating Trafficking in Persons (FEB 2009) (22 U.S.C. 7104(g)). ____ Alternate I (AUG 2007) of 52.222-50 (22 U.S.C. 7104(g)). (2) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553). (3) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Pub. L. 108-77, 108-78). (b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the contracting officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: XX (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sept 2006), with Alternate I (Oct 1995) (41 U.S.C. 253g and 10 U.S.C. 2402). ___ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Apr 2010) (Pub. L. 110-252, Title VI, Chapter 1 (41 U.S.C. 251 note)). ___ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (Jun 2010) (Section 1553 of Pub L. 111-5) (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009). XX (4) 52.204-10, Reporting Executive compensation and First-Tier Subcontract Awards (Jul 2010) (Pub. L. 109-282) (31 U.S.C. 6101 note). ___ (5) 52.204-11, American Recovery and Reinvestment Act-Reporting Requirements (Jul 2010) (Pub. L. 111-5). ___ (6) 52.209-6, Protecting the Government' Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment (Dec 2010) (31 U.S.C. 6101 note). (Applies to contracts over $30,000). (Not applicable to subcontracts for the acquisition of commercially available off-the-shelf items). ___ (7) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (section 740 of Division C of Public Law 111-117, section 743 of Division D of Public Law 111-8, and section 745 of Division D of Public Law 110-161). ___ (8) 52.219-3, Notice of Total HUBZone Set-Aside or Sole-Source Award (Jan 2011) (15 U.S.C. 657a). ___ (9) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (Jan 2011) (if the offeror elects to waive the preference, it shall so indicate in its offer)(15 U.S.C. 657a). ___ (10) [Reserved] ___ (11) (i) 52.219-6, Notice of Total Small Business Aside (June 2003) (15 U.S.C. 644). ___ (ii) Alternate I (Oct 1995) of 52.219-6. ___ (iii) Alternate II (Mar 2004) of 52.219-6. ___ (12) (i) 52.219-7, Notice of Partial Small Business Set-Aside (June 2003) (15 U.S.C. 644). ___ (ii) Alternate I (Oct 1995) of 52.219-7. ___ (iii) Alternate II (Mar 2004) of 52.219-7. XX (13) 52.219-8, Utilization of Small Business Concerns (Jan 2011) (15 U.S.C. 637(d)(2) and (3)). ___ (14) (i) 52.219-9, Small Business Subcontracting Plan (Jan 2011) (15 U.S.C. 637 (d)(4).) ___ (ii) Alternate I (Oct 2001) of 52.219-9. ___ (iii) Alternate II (Oct 2001) of 52.219-9. ___ (iv) Alternate III (July 2010) of 52.219-9. ___ (15) 52.219-14, Limitations on Subcontracting (Dec 1996) (15 U.S.C. 637(a)(14)). ___ (16) 52.219-16, Liquidated Damages-Subcontracting Plan (Jan 1999) (15 U.S.C. 637(d)(4)(F)(i)). ___ (17) (i) 52.219-23, Notice of Price Evaluation Adjustment for Small Disadvantaged Business Concerns (Oct 2008) (10 U.S.C. 2323) (if the offeror elects to waive the adjustment, it shall so indicate in its offer). ___ (ii) Alternate I (June 2003) of 52.219-23. ___ (18) 52.219-25, Small Disadvantaged Business Participation Program-Disadvantaged Status and Reporting (Dec 2010) (Pub. L. 103-355, section 7102, and 10 U.S.C. 2323). ___ (19) 52.219-26, Small Disadvantaged Business Participation Program-Incentive Subcontracting (Oct 2000) (Pub. L. 103-355, section 7102, and 10 U.S.C. 2323). ___ (20) 52.219-27, Notice of Total Service-Disabled Veteran-Owned Small Business Set-Aside (May 2004) (15 U.S.C. 657 f). XX (21) 52.219-28, Post Award Small Business Program Rerepresentation (Apr 2009) (15 U.S.C. 632(a)(2)). ___ (22) 52.219-29, Notice of Total Set-Aside for Economically Disadvantaged Women-Owned Small Business (EDWOSB) Concerns (Apr 2011). ___ (23) 52.219-30, Notice of Total Set-Aside for Women-Owned Small Business (WOSB) Concerns Eligible Under the WOSB Program (Apr 2011). ___ (24) 52.222-3, Convict Labor (June 2003) (E.O. 11755). XX (25) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (Jul 2010) (E.O. 13126). XX (26) 52.222-21, Prohibition of Segregated Facilities (Feb 1999). XX (27) 52.222-26, Equal Opportunity (Mar 2007) (E.O. 11246). XX (28) 52.222-35, Equal Opportunity for Veterans (Sep 2010) (38 U.S.C. 4212). XX (29) 52.222-36, Affirmative Action for Workers with Disabilities (Oct 2010) (29 U.S.C. 793). XX (30) 52.222-37, Employment Reports on Veterans (Sep 2010) (38 U.S.C. 4212). XX (31) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). ___ (32) 52.222-54, Employment Eligibility Verification (Jan 2009). (Executive Order 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.) ___ (33) (i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA-Designated Items (May 2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.) ___ (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.) XX (34) 52.223-15, Energy Efficiency in Energy-Consuming Products (Dec 2007) (42 U.S.C. 8259b). XX (35) (i) 52.223-16, IEEE 1680 Standard for the Environmental Assessment of Personal Computer Products (Dec 2007) (E.O. 13423). ___ (ii) Alternate I (Dec 2007) of 52.223-16. XX (36) 52.223-18, Contractor Policy to Ban Text Messaging while Driving (Sep 2010) (E.O. 13513). ___ (37) 52.225-1, Buy American Act--Supplies (Feb 2009) (41 U.S.C. 10a-10d). ___ (38) (i) 52.225-3, Buy American Act -Free Trade Agreements - Israeli Trade Act (Jun 2009) (41 U.S.C. 10a-10d, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, Pub. L. 108-77, 108-78, 108-286, 108-301, 109-53, 109-169, 109-283, and 110-138). ___ (ii) Alternate I (Jan 2004) of 52.225-3. ___ (iii) Alternate II (Jan 2004) of 52.225-3. XX (39) 52.225-5, Trade Agreements (Aug 2009) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note). XX (40) 52.225-13, Restrictions on Certain Foreign Purchases (Jun 2008) (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury). ___ (41) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150). ___ (42) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C. 5150). ___ (43) 52.232-29, Terms for Financing of Purchases of Commercial Items (Feb 2002) (41 U.S.C. 255(f), 10 U.S.C. 2307(f)). ___ (44) 52.232-30, Installment Payments for Commercial Items (Oct 1995) (41 U.S.C. 255(f), 10 U.S.C. 2307(f)). XX (45) 52.232-33, Payment by Electronic Funds Transfer-Central Contractor Registration (Oct. 2003) (31 U.S.C. 3332). ___ (46) 52.232-34, Payment by Electronic Funds Transfer-Other Than Central Contractor Registration (May 1999) (31 U.S.C. 3332). ___ (47) 52.232-36, Payment by Third Party (Feb 2010) (31 U.S.C. 3332). ___ (48) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a). ___ (49) (i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631). ___ (ii) Alternate I (Apr 2003) of 52.247-64. (c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or executive orders applicable to acquisitions of commercial items: [Contracting Officer check as appropriate.] ___ (1) 52.222-41, Service Contract Act of 1965 (Nov 2007) (41 U.S.C. 351, et seq.). ___ (2) 52.222-42, Statement of Equivalent Rates for Federal Hires (May 1989) (29 U.S.C. 206 and 41 U.S.C. 351, et seq.). ___ (3) 52.222-43, Fair Labor Standards Act and Service Contract Act -- Price Adjustment (Multiple Year and Option Contracts) (Sep 2009) (29 U.S.C.206 and 41 U.S.C. 351, et seq.). ___ (4) 52.222-44, Fair Labor Standards Act and Service Contract Act -- Price Adjustment (Sep 2009) (29 U.S.C. 206 and 41 U.S.C. 351, et seq.). ___ (5) 52.222-51, Exemption from Application of the Service Contract Act to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (Nov 2007) (41 U.S.C. 351, et seq.). ___ (6) 52.222-53, Exemption from Application of the Service Contract Act to Contracts for Certain Services--Requirements (Feb 2009) (41 U.S.C. 351, et seq.). ___ (7) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (Mar 2009) (Pub. L. 110-247). ___ (8) 52.237-11, Accepting and Dispensing of $1 Coin (Sep 2008) (31 U.S.C. 5112(p)(1)). (d) Comptroller General Examination of Record The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records -- Negotiation. (1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract. (2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved. (3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law. (e) (1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c) and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1) in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause- (i) 52.203-13, Contractor Code of Business Ethics and Conduct (Apr 2010) (Pub. L. 110-252, Title VI, Chapter 1 (41 U.S.C. 251 note)). (ii) 52.219-8, Utilization of Small Business Concerns (Dec 2010) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $650,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities. (iii) [Reserved] (iv) 52.222-26, Equal Opportunity (Mar 2007) (E.O. 11246). (v) 52.222-35, Equal Opportunity for Veterans (Sep 2010) (38 U.S.C. 4212). (vi) 52.222-36, Affirmative Action for Workers with Disabilities (Oct 2010) (29 U.S.C. 793). (vii) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40. (viii) 52.222-41, Service Contract Act of 1965, (Nov 2007), (41 U.S.C. 351, et seq.) (ix) 52.222-50, Combating Trafficking in Persons (Feb 2009) (22 U.S.C. 7104(g)). ___ Alternate I (Aug 2007) of 52.222-50 (22 U.S.C. 7104(g)). (x) 52.222-51, Exemption from Application of the Service Contract Act to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (Nov 2007) (41 U.S.C. 351, et seq.) (xi) 52.222-53, Exemption from Application of the Service Contract Act to Contracts for Certain Services--Requirements (Feb 2009) (41 U.S.C. 351, et seq.) (xii) 52.222-54, Employment Eligibility Verification (Jan 2009). (xiii) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (Mar 2009) (Pub. L. 110-247). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6. (xiv) 52.247-64, Preference for Privately-Owned U.S. Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64. (2) While not required, the contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations. (End of Clause) 12. FAR 52.212-1 INSTRUCTIONS TO OFFERORS--COMMERCIAL ITEMS (JUN 2008) (Reference 12.301) ADDENDUM TO FAR 52.212-1, INSTRUCTIONS TO OFFERORS-COMMERCIAL ITEMS (JUN 2008): The text of paragraph "f" is hereby deleted, and the paragraphs are annotated as "Reserved." All references herein to "offerors" shall be construed as "vendors," and all references herein to "offers" or "bids" shall be construed as "quotes." The items under this acquisition are subject to World Trade Organization Government Procurement Agreement and Free Trade Agreements. Vendors shall submit quotes in response to this solicitation in English and in U.S. dollars. Vendors interested in submitting a quote in response to this Request for Quotations are requested to provide the following information before July 29, 2011 at 12:00 PM Eastern Daylight Time. Vendors shall submit quotes in two (2) separate documents; pricing information shall be submitted separately from the Technical Approach and Past Performance information. Quotes shall be submitted via e-mail to Christine Jeffries at Christine.Jeffries@noaa.gov or by fax to 757-664-3643. Questions regarding this solicitation must be received in writing before 12:00 PM EDT on July 22, 2011. TECHNICAL APPROACH The vendor shall provide commercial product literature for the VFMMS being quoted and any additional written narrative, limited to a maximum of 10 pages, needed to address the following requirements of the system: Fuel Flow Meters • System is "fail open" design or equipped with automatic bypass to prevent fuel flow loss to the engine • Frequency for recalibrating meters/sensors • Calibration error/accuracy • Linearity error/accuracy • Repeatability error/accuracy • Number of viscosity data points that calibration is based upon • Temperature range that calibration is based upon • Laboratory documentation supporting calibration, linearity, and repeatability errors; graph of linearity • Pressure loss at max flow • Size of filtration required • Space requirements (for laminar flow) Data Management System • Number of auxiliary inputs (format) • Allows for GPS input • Installation procedures • Real time data available in gal/hr, gal/nm, and gal/Kw for each genset/engine and totaled across gensets/engines • Include color image of real time display on bridge and sample or data output from system • Provide for stand-alone display options, or integration into existing shipboard monitoring systems, or both. Installation • Identify any pre-set graphical reports that are included and indicate the available data outputs from the system, e.g., Excel format • Include the length of straight pipe required before meter. Technical Documentation • Technical documentation for Fuel Measurement and Management system components and software for each ship in Microsoft Word or Adobe PDF format and two hard copies. Warranty • Provide the terms and conditions of the standard commercial warranty provided with each system. PAST PERFORMANCE Vendors shall describe in paragraph form relevant performance on other contracts of similar size, content, and complexity to the work required by this RFQ or affirmatively state that it possesses no relevant past performance. The Vendor shall articulate the relevancy of prior contracts to this requirement; relevant past performance includes providing a minimum of 10 similar systems within the past 3 years installed on vessels of similar size and configuration as the NOAA fleet and evidence of past performance in developing, installing, and supporting fuel metering and fuel data management systems. Vendors are encouraged to provide information on problems or challenges encountered and how they were overcome or resolved. Provide a minimum of 3 and a maximum of 5 references that are familiar with the Vendor's past performance. For each reference, provide the following information: • A brief but detailed description of the system and services provided to include accomplishment, challenges, etc. • Contract number • Name and address of the Government agency or commercial entity • Point of contact with current phone number and e-mail address • Date of contract award • Period services were provided or delivery was made • Initial and current contract value The Government reserves the right to obtain information from other sources in addition to those included with the quote. PRICING In addition to the pricing required in the schedule for line items 0001 through 0005, provide the following breakdown of pricing information for items 0001 and 0003 or 0004 as indicated below: • The price for recalibrating meters/sensors, item 0003 or 0004 • The price of meters per engine (one supply; one return), item 0001 • The price of commissioning for first vessel, as included in the total quoted cost, item 0003 or 0004 • The price of training per ship, item 0003 or 0004 • The price of a complete data management system, including all hardware/software/display units with installation completed by NOAA, item 0001 • The price of a complete data management system including all hardware/software/display units with installation completed by contractor, item 0001 END OF ADDENDUM TO FAR 52.212-1, INSTRUCTIONS TO OFFERORS - COMMERCIAL ITEMS (JUN 2008) ADDENDUM TO FAR 52.212-2, EVALUATION - COMMERCIAL ITEMS (JAN 1999) The text of FAR provision 52.212-2 is replaced with the following: 13. CAR 1352.213-70 EVALUATION UTILIZING SIMPLIFIED ACQUISITION PROCEDURES (APR 2010) a. The Government will issue an order resulting from this request for quotation to the responsible vendor whose quotation results in the best value to the Government, considering both price and non-price factors. The following factors will be used to evaluate quotations: Technical Approach, Past Performance, and Price. Technical Approach and Past Performance are equal in weight, and when combined, are significantly more important than Price. b. Vendors without a record of relevant past performance or for whom past performance information is not available will not be evaluated favorably or unfavorably. c. Options. The Government will evaluate quotes for award purposes by adding the price for each installation option to the total price for the basic requirement. The Government may determine that a quote is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s). (End of Provision) END OF ADDENDUM TO FAR 52.212-2, EVALUATION - COMMERCIAL ITEMS (JAN 1999) 14. 52.212-3 -- OFFEROR REPRESENTATIONS AND CERTIFICATIONS -- COMMERCIAL ITEMS (MAY 2011) An offeror shall complete only paragraphs (b) of this provision if the offeror has completed the annual representations and certificates electronically at http://orca.bpn.gov. If an offeror has not completed the annual representations and certifications electronically at the ORCA website, the offeror shall complete only paragraphs (c) through (o) of this provision. (a) Definitions. As used in this provision-- "Economically disadvantaged women-owned small business (EDWOSB) concern" means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127. It automatically qualifies as a women-owned small business eligible under the WOSB Program. "Forced or indentured child labor" means all work or service- (1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or (2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties. "Inverted domestic corporation," as used in this section, means a foreign incorporated entity which is treated as an inverted domestic corporation under 6 U.S.C. 395(b), i.e., a corporation that used to be incorporated in the United States, or used to be a partnership in the United States, but now is incorporated in a foreign country, or is a subsidiary whose parent corporation is incorporated in a foreign country, that meets the criteria specified in 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c). An inverted domestic corporation as herein defined does not meet the definition of an inverted domestic corporation as defined by the Internal Revenue Coe at 26 U.S.C. 7874. "Manufactured end product" means any end product in Federal Supply Classes (FSC) 1000-9999, except- (1) FSC 5510, Lumber and Related Basic Wood Materials; (2) Federal Supply Group (FSG) 87, Agricultural Supplies; (3) FSG 88, Live Animals; (4) FSG 89, Food and Related Consumables; (5) FSC 9410, Crude Grades of Plant Materials; (6) FSC 9430, Miscellaneous Crude Animal Products, Inedible; (7) FSC 9440, Miscellaneous Crude Agricultural and Forestry Products; (8) FSC 9610, Ores; (9) FSC 9620, Minerals, Natural and Synthetic; and (10) FSC 9630, Additive Metal Materials. "Place of manufacture" means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture. "Restricted business operations" means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate- (1) Are conducted under contract directly and exclusively with the regional government of southern Sudan; (2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization; (3) Consist of providing goods or services to marginalized populations of Sudan; (4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization; (5) Consist of providing goods or services that are used only to promote health or education; or (6) Have been voluntarily suspended. "Service-disabled veteran-owned small business concern"- (1) Means a small business concern- (i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and (ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran. (2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16). "Small business concern" means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR Part 121 and size standards in this solicitation. "Subsidiary" means an entity in which more than 50 percent of the entity is owned- (1) Directly by a parent corporation; or (2) Through another subsidiary of a parent corporation. "Veteran-owned small business concern" means a small business concern- (1) Not less than 51 percent of which is owned by one or more veterans(as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and (2) The management and daily business operations of which are controlled by one or more veterans. "Women-owned business concern" means a concern which is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of the its stock is owned by one or more women; and whose management and daily business operations are controlled by one or more women. "Women-owned small business concern" means a small business concern -- (1) That is at least 51 percent owned by one or more women or, in the case of any publicly owned business, at least 51 percent of the stock of which is owned by one or more women; and (2) Whose management and daily business operations are controlled by one or more women. "Women-owned small business (WOSB) concern eligible under the WOSB Program (in accordance with 13 CFR part 127)," means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States. (b) (1) Annual Representations and Certifications. Any changes provided by the offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications posted on the Online Representations and Certifications Application (ORCA) website. (2) The offeror has completed the annual representations and certifications electronically via the ORCA website at http://orca.bpn.gov.After reviewing the ORCA database information, the offeror verifies by submission of this offer that the representation and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications-Commercial Items, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs ____________. [Offeror to identify the applicable paragraphs at (c) through (o) of this provision that the offeror has completed for the purposes of this solicitation only, if any. These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer. Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted on ORCA.] (c) Offerors must complete the following representations when the resulting contract is to be performed in the United States or its outlying areas. Check all that apply. (1) Small business concern. The offeror represents as part of its offer that it [_] is, [_] is not a small business concern. (2) Veteran-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents as part of its offer that it [_] is, [_] is not a veteran-owned small business concern. (3) Service-disabled veteran-owned small business concern. [Complete only if the offeror represented itself as a veteran-owned small business concern in paragraph (c)(2) of this provision.] The offeror represents as part of its offer that it [_] is, [_] is not a service-disabled veteran-owned small business concern. (4) Small disadvantaged business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents, for general statistical purposes, that it [_] is, [_] is not, a small disadvantaged business concern as defined in 13 CFR 124.1002. (5) Women-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it [_] is, [_] is not a women-owned small business concern. Note: Complete paragraphs (c)(8) and (c)(9) only if this solicitation is expected to exceed the simplified acquisition threshold. (6) WOSB concern eligible under the WOSB Program. [Complete only if the offeror represented itself as a women-owned small business concern in paragraph (c)(5) of this provision.] The offeror prepresents that- (i) It [_] is, [_] is not a WOSB concern eligible under the WOSB Program, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and (ii) It [_] is, [_] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(6)(i) of this provision is accurate in reference to the WOSB concern or concerns that are participating in the joint venture. [The offeror shall enter the name or names of the WOSB concern or concerns that are participating in the joint venture: _________.] Each WOSB concern participating in the joint venture shall submit a separate signed copy of the WOSB representation. (7) Economically disadvantaged women-owned small business (EDWOSB) concern. [Complete only if the offeror represented itself as a WOSB concern eligible under the WOSB Program in (c)(6) of this provision.] The offeror represents that- (i) It [_] is, [_] is not an EDWOSB concern eligible under the WOSB Program, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and (ii) It [_] is, [_] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(7)(i) of this provision is accurate in reference to the EDWOSB concern or concerns that are participating in the joint venture. The offeror shall enter the name or names of the EDWOSB concern or concerns that are participating in the joint venture: _____________. Each EDWOSB concern participating in the joint venture shall submit a separate signed copy of the EDWOSB representation. (8) Women-owned business concern (other than small business concern). [Complete only if the offeror is a women-owned business concern and did not represent itself as a small business concern in paragraph (c)(1) of this provision.]. The offeror represents that it [_] is, a women-owned business concern. (9) Tie bid priority for labor surplus area concerns. If this is an invitation for bid, small business offerors may identify the labor surplus areas in which costs to be incurred on account of manufacturing or production (by offeror or first-tier subcontractors) amount to more than 50 percent of the contract price: ___________________________________________ (10) [Complete only if the solicitation contains the clause at FAR 52.219-23, Notice of Price Evaluation Adjustment for Small Disadvantaged Business Concerns, or FAR 52.219-25, Small Disadvantaged Business Participation Program-Disadvantaged Status and Reporting, and the offeror desires a benefit based on its disadvantaged status.] (i) General. The offeror represents that either- (A) It [_] is, [_] is not certified by the Small Business Administration as a small disadvantaged business concern and identified, on the date of this representation, as a certified small disadvantaged business concern in the CCR Dynamic Small Business Search database maintained by the Small Business Administration, and that no material change in disadvantaged ownership and control has occurred since its certification, and, where the concern is owned by one or more individuals claiming disadvantaged status, the net worth of each individual upon whom the certification is based does not exceed $750,000 after taking into account the applicable exclusions set forth at 13 CFR 124.104(c)(2); or (B) It [_] has, [_] has not submitted a completed application to the Small Business Administration or a Private Certifier to be certified as a small disadvantaged business concern in accordance with 13 CFR 124, Subpart B, and a decision on that application is pending, and that no material change in disadvantaged ownership and control has occurred since its application was submitted. (ii) Joint Ventures under the Price Evaluation Adjustment for Small Disadvantaged Business Concerns. The offeror represents, as part of its offer, that it is a joint venture that complies with the requirements in 13 CFR 124.1002(f) and that the representation in paragraph (c)(10)(i) of this provision is accurate for the small disadvantaged business concern that is participating in the joint venture. [The offeror shall enter the name of the small disadvantaged business concern that is participating in the joint venture: ________________.] (11) HUBZone small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents, as part of its offer, that-- (i) It [_] is, [_] is not a HUBZone small business concern listed, on the date of this representation, on the List of Qualified HUBZone Small Business Concerns maintained by the Small Business Administration, and no material changes in ownership and control, principal office, or HUBZone employee percentage have occurred since it was certified in accordance with 13 CFR part 126; and (ii) It [_] is, [_] is not a HUBZone joint venture that complies with the requirements of 13 CFR part 126, and the representation in paragraph (c)(11)(i) of this provision is accurate for each HUBZone small business concern participating in the HUBZone joint venture. [The offeror shall enter the names of each of the HUBZone small business concerns participating in the HUBZone joint venture: __________.] Each HUBZone small business concern participating in the HUBZone joint venture shall submit a separate signed copy of the HUBZone representation. (d) Representations required to implement provisions of Executive Order 11246 -- (1) Previous contracts and compliance. The offeror represents that -- (i) It [_] has, [_] has not, participated in a previous contract or subcontract subject to the Equal Opportunity clause of this solicitation; and (ii) It [_] has, [_] has not, filed all required compliance reports. (2) Affirmative Action Compliance. The offeror represents that -- (i) It [_] has developed and has on file, [_] has not developed and does not have on file, at each establishment, affirmative action programs required by rules and regulations of the Secretary of Labor (41 CFR parts 60-1 and 60-2), or (ii) It [_] has not previously had contracts subject to the written affirmative action programs requirement of the rules and regulations of the Secretary of Labor. (e) Certification Regarding Payments to Influence Federal Transactions (31 U.S.C. 1352). (Applies only if the contract is expected to exceed $150,000.) By submission of its offer, the offeror certifies to the best of its knowledge and belief that no Federal appropriated funds have been paid or will be paid to any person for influencing or attempting to influence an officer or employee of any agency, a Member of Congress, an officer or employee of Congress or an employee of a Member of Congress on his or her behalf in connection with the award of any resultant contract. If any registrants under the Lobbying Disclosure Act of 1995 have made a lobbying contact on behalf of the offeror with respect to this contract, the offeror shall complete and submit, with its offer, OMB Standard Form LLL, Disclosure of Lobbying Activities, to provide the name of the registrants. The offeror need not report regularly employed officers or employees of the offeror to whom payments of reasonable compensation were made. (f) Buy American Act Certificate. (Applies only if the clause at Federal Acquisition Regulation (FAR) 52.225-1, Buy American Act - Supplies, is included in this solicitation.) (1) The offeror certifies that each end product, except those listed in paragraph (f)(2) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (2) of the definition of "domestic end product." The terms "commercially available off-the-shelf (COTS) item," "component," "domestic end product," "end product," "foreign end product," and "United States" are defined in the clause of this solicitation entitled "Buy American Act-Supplies." (2) Foreign End Products: LINE ITEM NO. COUNTRY OF ORIGIN [List as necessary] (3) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. (g) (1) Buy American Act -- Free Trade Agreements -- Israeli Trade Act Certificate. (Applies only if the clause at FAR 52.225-3, Buy American Act -- Free Trade Agreements -- Israeli Trade Act, is included in this solicitation.) (i) The offeror certifies that each end product, except those listed in paragraph (g)(1)(ii) or (g)(1)(iii) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The terms "Bahrainian, Moroccan, Omani, or Peruvian end product," "commercially available off-the-shelf (COTS) item," "component," "domestic end product," "end product," "foreign end product," "Free Trade Agreement country," "Free Trade Agreement country end product," "Israeli end product," and ‘United States' are defined in the clause of this solicitation entitled "Buy American Act--Free Trade Agreements--Israeli Trade Act." (ii) The offeror certifies that the following supplies are Free Trade Agreement country end products (other than Bahrainian, Moroccan, Omani, or Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled "Buy American Act-Free Trade Agreements-Israeli Trade Act": Free Trade Agreement Country End Products (Other than Bahrainian or Moroccan End Products) or Israeli End Products: LINE ITEM NO. COUNTRY OF ORIGIN [List as necessary] (iii) The offeror shall list those supplies that are foreign end products (other than those listed in paragraph (g)(1)(ii) or this provision) as defined in the clause of this solicitation entitled "Buy American Act-Free Trade Agreements-Israeli Trade Act." The offeror shall list as other foreign end products those end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (2) of the definition of "domestic end product." Other Foreign End Products: LINE ITEM NO. COUNTRY OF ORIGIN [List as necessary] (iv) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. (2) Buy American Act-Free Trade Agreements-Israeli Trade Act Certificate, Alternate I. If Alternate I to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision: (g)(1)(ii) The offeror certifies that the following supplies are Canadian end products as defined in the clause of this solicitation entitled "Buy American Act-Free Trade Agreements-Israeli Trade Act": Canadian End Products: Line Item No.: ___________________________________________ [List as necessary] (3) Buy American Act-Free Trade Agreements-Israeli Trade Act Certificate, Alternate II. If Alternate II to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision: (g)(1)(ii) The offeror certifies that the following supplies are Canadian end products or Israeli end products as defined in the clause of this solicitation entitled ``Buy American Act--Free Trade Agreements--Israeli Trade Act'': Canadian or Israeli End Products: Line Item No.: Country of Origin: [List as necessary] (4) Trade Agreements Certificate. (Applies only if the clause at FAR 52.225-5, Trade Agreements, is included in this solicitation.) (i) The offeror certifies that each end product, except those listed in paragraph (g)(4)(ii) of this provision, is a U.S.-made or designated country end product as defined in the clause of this solicitation entitled "Trade Agreements." (ii) The offeror shall list as other end products those end products that are not U.S.-made or designated country end products. Other End Products Line Item No.: Country of Origin: [List as necessary] (iii) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. For line items covered by the WTO GPA, the Government will evaluate offers of U.S.-made or designated country end products without regard to the restrictions of the Buy American Act. The Government will consider for award only offers of U.S.-made or designated country end products unless the Contracting Officer determines that there are no offers for such products or that the offers for such products are insufficient to fulfill the requirements of the solicitation. (h) Certification Regarding Responsibility Matters (Executive Order 12689). (Applies only if the contract value is expected to exceed the simplified acquisition threshold.) The offeror certifies, to the best of its knowledge and belief, that the offeror and/or any of its principals-- (1) [_] Are, [_] are not presently debarred, suspended, proposed for debarment, or declared ineligible for the award of contracts by any Federal agency; (2) [_] Have, [_] have not, within a three-year period preceding this offer, been convicted of or had a civil judgment rendered against them for: commission of fraud or a criminal offense in connection with obtaining, attempting to obtain, or performing a Federal, state or local government contract or subcontract; violation of Federal or state antitrust statutes relating to the submission of offers; or commission of embezzlement, theft, forgery, bribery, falsification or destruction of records, making false statements, tax evasion, violating Federal criminal tax laws, or receiving stolen property; and (3) [_] Are, [_] are not presently indicted for, or otherwise criminally or civilly charged by a Government entity with, commission of any of these offenses enumerated in paragraph (h)(2) of this clause; and (4) [_] Have, [_] have not, within a three-year period preceding this offer, been notified of any delinquent Federal taxes in an amount that exceeds $3,000 for which the liability remains unsatisfied. (i) Taxes are considered delinquent if both of the following criteria apply: (A) The tax liability is finally determined. The liability is finally determined if it has been assessed. A liability is not finally determined if there is a pending administrative or judicial challenge. In the case of a judicial challenge to the liability, the liability is not finally determined until all judicial appeal rights have been exhausted. (B) The taxpayer is delinquent in making payment. A taxpayer is delinquent if the taxpayer has failed to pay the tax liability when full payment was due and required. A taxpayer is not delinquent in cases where enforced collection action is precluded. (ii) Examples. (A) The taxpayer has received a statutory notice of deficiency, under I.R.C. §6212, which entitles the taxpayer to seek Tax Court review of a proposed tax deficiency. This is not a delinquent tax because it is not a final tax liability. Should the taxpayer seek Tax Court review, this will not be a final tax liability until the taxpayer has exercised all judicial appear rights. (B) The IRS has filed a notice of Federal tax lien with respect to an assessed tax liability, and the taxpayer has been issued a notice under I.R.C. §6320 entitling the taxpayer to request a hearing with the IRS Office of Appeals Contesting the lien filing, and to further appeal to the Tax Court if the IRS determines to sustain the lien filing. In the course of the hearing, the taxpayer is entitled to contest the underlying tax liability because the taxpayer has had no prior opportunity to contest the liability. This is not a delinquent tax because it is not a final tax liability. Should the taxpayer seek tax court review, this will not be a final tax liability until the taxpayer has exercised all judicial appeal rights. (C) The taxpayer has entered into an installment agreement pursuant to I.R.C. §6159. The taxpayer is making timely payments and is in full compliance with the agreement terms. The taxpayer is not delinquent because the taxpayer is not currently required to make full payment. (D) The taxpayer has filed for bankruptcy protection. The taxpayer is not delinquent because enforced collection action is stayed under 11 U.S.C. §362 (the Bankruptcy Code). (i) Certification Regarding Knowledge of Child Labor for Listed End Products (Executive Order 13126). [The Contracting Officer must list in paragraph (i)(1) any end products being acquired under this solicitation that are included in the List of Products Requiring Contractor Certification as to Forced or Indentured Child Labor, unless excluded at 22.1503(b).] (1) Listed End Product Listed End Product: Listed Countries of Origin: (2) Certification. [If the Contracting Officer has identified end products and countries of origin in paragraph (i)(1) of this provision, then the offeror must certify to either (i)(2)(i) or (i)(2)(ii) by checking the appropriate block.] [_] (i) The offeror will not supply any end product listed in paragraph (i)(1) of this provision that was mined, produced, or manufactured in the corresponding country as listed for that product. [_] (ii) The offeror may supply an end product listed in paragraph (i)(1) of this provision that was mined, produced, or manufactured in the corresponding country as listed for that product. The offeror certifies that is has made a good faith effort to determine whether forced or indentured child labor was used to mine, produce, or manufacture any such end product furnished under this contract. On the basis of those efforts, the offeror certifies that it is not aware of any such use of child labor. (j) Place of manufacture. (Does not apply unless the solicitation is predominantly for the acquisition of manufactured end products.) For statistical purposes only, the offeror shall indicate whether the place of manufacture of the end products it expects to provide in response to this solicitation is predominantly- (1) [_] In the United States (Check this box if the total anticipated price of offered end products manufactured in the United States exceeds the total anticipated price of offered end products manufactured outside the United States); or (2) [_] Outside the United States. (k) Certificates regarding exemptions from the application of the Service Contract Act. (Certification by the offeror as to its compliance with respect to the contract also constitutes its certification as to compliance by its subcontractor if it subcontracts out the exempt services.) [The contracting officer is to check a box to indicate if paragraph (k)(1) or (k)(2) applies.] (1) [_] Maintenance, calibration, or repair of certain equipment as described in FAR 22.1003-4(c)(1). The offeror [_] does [_] does not certify that- (i) The items of equipment to be serviced under this contract are used regularly for other than Governmental purposes and are sold or traded by the offeror (or subcontractor in the case of an exempt subcontract) in substantial quantities to the general public in the course of normal business operations; (ii) The services will be furnished at prices which are, or are based on, established catalog or market prices (see FAR 22.1003-4(c)(2)(ii)) for the maintenance, calibration, or repair of such equipment; and (iii) The compensation (wage and fringe benefits) plan for all service employees performing work under the contract will be the same as that used for these employees and equivalent employees servicing the same equipment of commercial customers. (2) [_] Certain services as described in FAR 22.1003-4(d)(1). The offeror [_] does [_] does not certify that- (i) The services under the contract are offered and sold regularly to non-Governmental customers, and are provided by the offeror (or subcontractor in the case of an exempt subcontract) to the general public in substantial quantities in the course of normal business operations; (ii) The contract services will be furnished at prices that are, or are based on, established catalog or market prices (see FAR 22.1003-4(d)(2)(iii)); (iii) Each service employee who will perform the services under the contract will spend only a small portion of his or her time (a monthly average of less than 20 percent of the available hours on an annualized basis, or less than 20 percent of available hours during the contract period if the contract period is less than a month) servicing the Government contract; and (iv) The compensation (wage and fringe benefits) plan for all service employees performing work under the contract is the same as that used for these employees and equivalent employees servicing commercial customers. (3) If paragraph (k)(1) or (k)(2) of this clause applies- (i) If the offeror does not certify to the conditions in paragraph (k)(1) or (k)(2) and the Contracting Officer did not attach a Service Contract Act wage determination to the solicitation, the offeror shall notify the Contracting Officer as soon as possible; and (ii) The Contracting Officer may not make an award to the offeror if the offeror fails to execute the certification in paragraph (k)(1) or (k)(2) of this clause or to contact the Contracting Officer as required in paragraph (k)(3)(i) of this clause. (l) Taxpayer identification number (TIN) (26 U.S.C. 6109, 31 U.S.C. 7701). (Not applicable if the offeror is required to provide this information to a central contractor registration database to be eligible for award.) (1) All offerors must submit the information required in paragraphs (l)(3) through (l)(5) of this provision to comply with debt collection requirements of 31 U.S.C. 7701(c) and 3325(d), reporting requirements of 26 U.S.C. 6041, 6041A, and 6050M, and implementing regulations issued by the Internal Revenue Service (IRS). (2) The TIN may be used by the government to collect and report on any delinquent amounts arising out of the offeror's relationship with the Government (31 U.S.C. 7701(c)(3)). If the resulting contract is subject to the payment reporting requirements described in FAR 4.904, the TIN provided hereunder may be matched with IRS records to verify the accuracy of the offeror's TIN.] (3) Taxpayer Identification Number (TIN). [_] TIN:_____________________. [_] TIN has been applied for. [_] TIN is not required because: [_] Offeror is a nonresident alien, foreign corporation, or foreign partnership that does not have income effectively connected with the conduct of a trade or business in the United States and does not have an office or place of business or a fiscal paying agent in the United States; [_] Offeror is an agency or instrumentality of a foreign government; [_] Offeror is an agency or instrumentality of the Federal Government; (4) Type of organization. [_] Sole proprietorship; [_] Partnership; [_] Corporate entity (not tax-exempt); [_] Corporate entity (tax-exempt); [_] Government entity (Federal, State, or local); [_] Foreign government; [_] International organization per 26 CFR 1.6049-4; [_] Other ____________________. (5) Common parent. [_] Offeror is not owned or controlled by a common parent: [_] Name and TIN of common parent: Name ____________________________________ TIN ______________________________________ (m) Restricted business operations in Sudan. By submission of its offer, the offeror certifies that the offeror does not conduct any restricted business operations in Sudan. (n) Prohibition on Contracting with Inverted Domestic Corporations- (1) Relation to Internal Revenue Code. An inverted domestic corporation as herein defined does not meet the definition of an inverted domestic corporation as defined by the Internal Revenue Code 25 U.S.C. 7874. (2) Representation. By submission of its offer, the offeror represents that- (i) It is not an inverted domestic corporation; and (ii) It is not a subsidiary of an inverted domestic corporation. (o) Sanctioned activities relating to Iran. (1) Unless a waiver is granted or an exception applies as provided in paragraph (o)(2) of this provision, by submission of its offer, the offeror certifies that the offeror, or any person owned or controlled by the offeror, does not engage in any activities for which sanctions may be imposed under section 5 of the Iran Sanctions Act of 1996. (2) The certification requirement of paragraph (o)(1) of this provision does not apply if-- (i) This solicitation includes a trade agreements certification (e.g., 52.212-3(g) or a comparable agency provision); and (ii) The offeror has certified that all the offered products to be supplied are designated country end products. (End of Provision) SCOPE OF WORK: Vessel Fuel Measurement and Management System 1. ABSTRACT The National Oceanic and Atmospheric Administration (NOAA) Office of Marine and Aviation Operations (OMAO) is requesting quotes to purchase and potentially install fuel consumption monitoring systems on its diesel engines (generator and main propulsion) on six vessels to provide real-time monitoring and historical fuel consumption data. 2. REFERENCE MATERIAL 2.1. Greening of the Fleet Cost/Benefit Research Study, Appendix A-2: NOAA Engines 2.2. ABS Rules for Steel Vessels Under 90 Meters (295 Feet) in Length (ABS 90M Rules) 2.3. USCG 46 CFR Chapter 1, Subchapters F, I, J 2.4. NOAA Drawing DWG M282-541-FP04-001 Fuel Service & Transfer System Diagram 2.5. NOAA Drawing Dwg 342-6233832 Fuel Oil Fill and Transfer Sys Arrangement 2.6. NOAA Drawing Dwg S4106-57(EMD 8338147) Fuel Oil System Diagram 3. TECHNICAL REQUIREMENTS Contractor shall provide documentation verifying that all material and workmanship meets or exceeds American Bureau of Shipping (ABS) requirements for ABS classed ship systems (including ABS 90M) and 46 CFR requirements for fuel oil service piping systems (vital Class II piping system), electrical, and propulsion monitoring equipment. The Fuel Consumption Measurement and Management System shall include the following components and salient characteristics: 3.1. Fuel Flow Meters Shall: 3.1.1. Be designed/rated for full range of engine fuel flow rate (see 2.1 for details of ship engines and generators). 3.1.2. Compensate for ambient and fuel oil temperature variation, and have pulsation dampening. 3.1.3. Have pressure compensation. 3.1.4. Measure fuel supply and return flow. 3.1.5. "Fail Open", or be equipped with an automatic bypass to prevent fuel flow loss to the engine. 3.1.6. Be constructed of materials rated to handle diesel fuel oil at a minimum of 150 psi and 125 deg F fuel oil operating temperature, suitable for marine internal combustion engine fuel oil service systems. 3.1.7. Be calibrated for use with #2 Diesel fuel oil S15-S500 (Ultra Low Sulfur and Low Sulfur Diesel) per ASTM D975-09b Standard Specification for Diesel Fuel Oils (viscosity 1.9-4.1 mm2/S @40oC). 3.1.8. Have a calibration accuracy of 0.10% and linearity that achieves an overall accuracy considering calibration, repeatability, and linearity of 0.20% or better. 3.1.9. Document calibration at multiple points of the flow range to verify accuracy. 3.1.10. Have piping system fittings that meet or exceed ABS 90M rules Part 4 Chapter 4 Section 2/13 for Group II flammable fluid systems. 3.1.11. Have Flow meter transmitters that operate on 24 VDC input power, encased in a NEMA 4X enclosure, and provide an RS-485 signal output. 3.1.12. Have minimal pressure loss - maximum 1.5 psi (0.1 bar) at maximum flow rate. 3.1.13. Fuel piping adapter fittings for the fuel flow sensors (meter) installed in existing piping by socket welded joint to piping conforming to materials and specifications for the fuel system as shown on drawings listed in section 2 above or ASTM F1155-98(204); Carbon steel ASTM A105/A105M; ANSI B16.5. The adapter fitting shall also be provided with threaded connector matching flow sensor manufacture fitting requirements. 3.1.14. Use MIL-C-24643, Low Smoke cable for all new interconnecting power and control cable. When the required cable is not available in MIL Standard, then the Contractor shall substitute IEEE Standard 45 cable or other appropriate cable acceptable to the USCG and ABS. 3.1.15. Have flow meters oriented and located in accordance with manufacturer's recommendations. 3.1.16. Be supported by pipe support hangers which meet the requirements of ASTM F 708, before and after flow meters. 3.1.17. Be located on the supply side downstream of fuel filters between the engine inlet flexible hose connection and existing remotely operated FO emergency shutoff valve following flow meter provider's recommendations. On the return side the flowmeter shall be located downstream of engine return flexible hose connections and prior to first cutout valve and piping junction with intersection return piping from other engines. 3.1.18. Be installed as far away from heated surfaces as practical, and in a visible location. 3.1.19. Have protective spray shields around any flanged connection and valve in accordance with ASTM F1138 to prevent the possibility of leaked fuel spraying onto exposed hot surfaces. 3.1.20. Be pressure tested to 150% of maximum fuel system design working pressure or 75 psig whichever is higher, in accordance with requirements of reference 2.2 Part 4 Chapter 4 Section 2-3. 3.2. Data Acquisition Unit and Display Shall: 3.2.1. Provide real time data display on the bridge and engine room in user selected units, including but not limited to gal/hr (for each engine and total for all propulsion), gal/mile (total fuel consumed for diesel electric vessels and fuel consumed by propulsion diesels for non-diesel electric vessels), and gal/generator KW. 3.2.2. Be able to independently access screens with customizable displays. 3.2.3. Be able to record and display total fuel consumption per day, per month, per year, and per specific time period (user-defined start-stop consumption) basis, including a start/stop for specific time frames, such as missions. 3.2.4. Accept at least six (6) auxiliary data inputs, including: 3.2.4.1. Global Positioning System (GPS) 3.2.4.2. Propulsion shaft RPM 3.2.4.3. KW input from generator 3.2.5. Include digital-analog (DA) interface components necessary to display and record data output from the fuel flow meters and propulsion shaft rpm for each main propulsion generator set or main propulsion diesel engine. 3.2.6. Display and record each diesel generator's kilowatt output. 3.2.7. Have armored and shielded cables between all system components to prevent cable damage and RF interference. 3.2.8. Use 24 VDC power supplies connected to an emergency power panel. 3.2.9. Be equipped with junction box enclosures that are at least Nema 4X rated. 3.2.10. Software for data logging, data analysis and report generation shall support independent display on units located on the bridge and engine room: total of two (2) output displays. 3.2.11. System must be designed to operate while being subjected to engine room temperatures. 3.2.12. Provide for stand-alone display options, or integration into existing shipboard monitoring systems, or both. 3.2.13. Provide data logging capability for at least 365 days. 3.3. Reporting/Data Download 3.3.1. The system shall be capable of emailing or automatically sending data to shore support. 3.3.2. The system must be configurable to provide output in fuel usage versus KW output on generators. 3.4. Installation 3.4.1. Contractor shall provide technical supervision throughout the installation, and conduct full on-site commissioning. 3.4.2. Contractor shall provide a manufacturer's technical representative to accomplish at least four (4) hours of technical instruction/training to each ship's crew on system operation, maintenance and repair. Training is to be provided at the home port of each ship. 3.4.3. Contractor will also provide instruction on the use of proprietary system software and software management tools provided for fuel consumption data collection, analysis and reports. 3.4.4. Contractor shall complete all work while vessel is dockside and demonstrate all functions; contractor will be available to support the vessel during dockside and underway testing, while accuracy of the system is assessed by comparing system data with engine fuel consumption curves and other related methods to measure fuel consumption. 3.4.5. Contractor shall provide technical documentation for Fuel Measurement and Management system components and software to each ship in Microsoft Word or Adobe PDF format and two hard copies. 4. GOVERNMENT FURNISHED MATERIAL Not applicable 5. SECURITY AND ACCESS REQUIREMENTS Project may require access to NAVSTA Pearl Harbor; Federal Center South, Seattle, WA; and the NAVSTA Charleston, SC - among other locations. Access to NOAA vessels will be coordinated by the COTR. When the contractor needs to visit vessels, they will be attended by a NOAA employee.
Web Link: FBO.gov Permalink
(https://www.fbo.gov/spg/DOC/NOAA/EASC/EA133M-11-RQ-0957/listing.html)
Place of Performance: Address: To be determined., United States
Record: SN02503397-W 20110721/110720001521-66a4af1cd148e532851efdd45d352e99 (fbodaily.com)
Source: FedBizOpps Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's FBO Daily Index Page |

Loren Data's SAM Daily™

66 -- Vessel Fuel Measurement and Management System - References