SPECIAL NOTICE
65 -- Notice of Intent to Sole Source ALCON Ophthalmic Lenses
- Notice Date
- 7/7/2011
- Notice Type
- Special Notice
- NAICS
- 339112
— Surgical and Medical Instrument Manufacturing
- Contracting Office
- Great Plains Regional Contracting Ofc, ATTN: MCAA GP L31 9V, 3851 Roger Brooke Drive, Fort Sam Houston, TX 78234-6200
- ZIP Code
- 78234-6200
- Solicitation Number
- W81K0011T0161
- Archive Date
- 10/5/2011
- Point of Contact
- SRCO(w), (210) 221-3134
- E-Mail Address
-
Great Plains Regional Contracting Ofc
(srcobidbox@amedd.army.mil)
- Small Business Set-Aside
- N/A
- Description
- Notice of Intent to Sole Source Contract The Southern Region Contracting Office - West (Provisional), on or about, 10 August 2011 intends to issue a sole source purchase order on a consignment basis to ALCON Laboratories for the purchase of ALCON Ophthalmic Lenses. These lenses will provide the operating room the mission capability to function at a high capacity achieve the best possible patient care for Reynolds Army Hospital (RACH), Ft. Sill, OK. This notice is neither a request for quotes nor a solicitation of offers; however, all responsible sources may submit a capability statement, proposal, or quotation, which shall be considered by the agency. Salient Characteristics: Lens type #1: Alcon SN60WF : +6 through +30 diopter : Replacement of human crystalline lens for correction of Aphakia in adults : Acrysof IQ UV and blue light filtering chromophore : Aspheric Lens Surface : Biconvex optic with supporting haptics : Posterior aspheric surface must be designed with negative spherical aberration to compensate for positive spherical aberration of average corneas. : High refractive index soft acrylic material : Foldable lens allowing smaller incision smaller than optic diameter. : Toric Posterior Chamber Intraocular lens (IOL) : Single Piece design Optic Type: Anterior Asymmetric Biconvex optic type. Optic Diameter: 6.0mm. Overall length: 13.0mm. Haptic Angle: 0 degrees. Blue light wavelength range: 400-475nm. Material: Ultraviolet and blue light filtering Acrylate/Methacrylate Copolymer. Index of Refraction: 1.55. Configuration: Anterior Asymmetric Biconvex. Configuration: STABLEFORCE Modified-L. Power: +6.0 through +30 D. Reduction of blue light wave lengths from 62% at 400nm to 23" at 475nm. Lens Type #2: Alcon SN6ATT - Lens to include: SN6AT3, SN6AT4, and SN6AT5 +6 through +30 diopter : Posterior chamber lens needed for the correction of Astigmatism : Acrysof IQ Toric Posterior Chimer Intraocular Lens (IOL) : Sterile UV and Blue light filtering Chromophore : Biconvex tonic aspheric optic : High refractive index soft acrylic material : Anterior surface Acrysof IQ tonic IOL aspheric surface must be designed with negative spherical aberration identical to Aspheric Acrysof IQ IOL SN60WF model compensate for positive spherical aberration of cornea. : Foldable lens allowing smaller incision smaller than optic diameter. : Toric Posterior Chamber Intraocular lens (IOL) : Single piece design Power: +6 through +30 D. Optic Type: Biconvex Toric Aspheric Optic Optic Diameter: 6.0mm Overall length: 13.0 mm Haptic Angle: 0 degrees Haptic Configuration: STABLEFORCE Blue light wavelength range: 400-475nm wavelength range Optic Haptic Material: Ultraviolet and blue light filtering Acrylate/Methacrylate Copolymer UV cutoff at 10% T: 402nm Index of refraction: 1.55 Lens Type #3: Alcon Kerman / Multiplex III MTA4UO +6.0 through 30.0 diopter Alcon Anterior chamber lens designed to position anterior of iris to replace natural crystalline lens of eye. : Single Piece Anterior Chamber lens : Sterile UV-Absorbing PMMA : Intraocular Lens : lens used for primary or secondary implantation after cataract placement. : lens used commonly for secondary aphakic surgery patient (MTAU). OPTIC- Power: +6 through 30.0 Optic Configuration: Convexoplano Material: Polymethylmethacrylate (PMMA) UV- Absorbing Color: Clear UV cutoff at 10%: 380nm (+5.0 diopter lens) : 386nm (+30.0 diopter lens) Specific Gravity: 1.19 Index of Refraction: 1.49 Anterior Chamber diameter: 12.0-12.4 Lens Size Diameter: 13.0mm Corresponding Model designation: MTA4UO Physical : MULTIFLEX III Lens Type #4: Alcon MN60AC / Multipiece Posterior chamber lens +6.0 through +30.0 : Sterile Acrysof Natural UV / blue light filtering / UV Absorbing : Acrylic foldable : Multipiece IOL : Posterior Chamber lens : Optical implant : Designed to replace crystalline lens for correction of aphakia in adults. : Acrysof Natural IOL : Blue filtering Chromophore : Must consist of High refractive index soft acrylic material :Must filter light in the 400-475nm wavelength range. : reduces trasmittance of blue light wavelengths from 71% at 400nm to 22% at 475nm. OPTIC- Power: +6.0 through +30.0 diopter Optic Type: A Configuration: Anterior asymmetric biconvex Index of Refraction: 1.55 Material: Ultraviolet and blue light absorbing Acrylate/ Methacrylate Copolymer Haptics- Material: PMMA (MONOFLEX) Configuration: Modified-C Color: Blue Optic Diameter: 6.0mm Optic Overall length: 13.0 Haptic Angle: 10 degrees Model: MN60AC Lens Type #5: Acrysof IQ ReStor SN6AD1 IOL Apodized Diffractive Posterior Chamber Intraocular lens (IOL) : Optical portion consists of High refractive index material w/blue light filtering chromophore, filtering light similar to human crystalline lens. : Filters light in the 400-475 nm blue light wavelength range. : Optical portion is symmetric, biconvex and consist of soft acrylic material for folding prior to insertion of lens, to allow for smaller incisions. : Lens unfolds after insertion. : Designed with Negative spherical aberration for function (compensation) for positive spherical aberration of the cornea. : Anterior Aspheric Diffractive Surface : Sterile UV and Blue Light Filtering Acrylic Fodable. Optic Type: Apodized Diffractive Aspheric Optics material: Ultraviolet and blue light filtering Acrylate/Methacrylate Copolymer Optic Powers: +6.0 through +30.0 Index of Refraction: 1.55 Haptic Configuration: STABLEFORCE Haptic Color: Yellow Optic Diameter (mm): 6.0 Overal Length (mm): 13.0 Haptic Angle: 0 degrees INTERESTED PARTIES NEED TO RESPOND TO THIS NOTICE ON OR BEFORE 17 JULY 2011, 1:00 P.M. (CST) Place of Performance: Reynolds Army Hospital (RACH), Ft. Sill, OK Place od Performance 1 Oct 2011- 30 Sep 2012 plus three option years. Point(s) of Contact: Therese Newbauer, Contract Specialist Phone: (210) 221-4820 E-mail: teri.newbauer@us.army.mil Gloria Moreno, Contracting Officer Phone: (210) 221-4752 E-mail: gloria.moreno@us.army.mil Contracting Office Address: Great Plains Regional Contracting Office ATTN: MCAA GP L31 9V 3851 Roger Brooke Dr. Fort Sam Houston TX 78234-6200
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USA/MEDCOM/DADA09/W81K0011T0161/listing.html)
- Record
- SN02492197-W 20110709/110707235343-1dab9b57c0387e6a7752c4b77de582b5 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |