SOURCES SOUGHT
20 -- Tool Procurement for Motoren Und Turbine Union (MTU) 8V396TE94 Marine Propulsion Diesel Engine
- Notice Date
- 6/16/2011
- Notice Type
- Sources Sought
- NAICS
- 333618
— Other Engine Equipment Manufacturing
- Contracting Office
- Department of Homeland Security, United States Coast Guard (USCG), USCG Surface Forces Logistics Center (SFLC) Procurement Branch 1, 300 East Main Street, Suite 600, Norfolk, Virginia, 23510-9102, United States
- ZIP Code
- 23510-9102
- Solicitation Number
- HSCG80-11-Q-3HB002
- Point of Contact
- Nancy M Brinkman, Phone: 757-628-4579
- E-Mail Address
-
Nancy.M.Brinkman@uscg.mil
(Nancy.M.Brinkman@uscg.mil)
- Small Business Set-Aside
- N/A
- Description
- The U.S. Coast Guard is considering whether or not to set aside an acquisition for HUBZone concerns or for Service-Disabled Veteran-owned Small Business concerns. The NAICS code is 333618 and the corresponding size standard is 1,000 employees. The scope of the acquisition is for Tools Procurement for Motoren Und Turbine Union (MTU) 8V396TE94 Marine Propulsion Diesel Engine. At the present time, it is expected that the acquisition will be issued as a Small Business Set-aside. However, in accordance with FAR 19.1305 if your firm is HUBZone certified or in accordance with FAR 19.1405 is a Service-Disabled Veteran-owned Small Business and intends to submit an offer on this acquisition, please respond by e-mail to nancy.m.brinkman@uscg.mil or by fax at (757) 628-4676. Questions may be referred to Nancy Brinkman, Contracting Officer. Your response you must include: (a) a positive statement of your intention to submit a bid for this solicitation as a prime contractor; (b) evidence of experience in work similar in type and scope to include: contract numbers, project titles, dollar amounts, points of contact and telephone numbers; (c) past performance references with points of contact and telephone numbers. At least two references are requested, but more are desirable. Your response is required by June 21, 2011. Contractors are reminded that should this acquisition become a HUBZone set aside, FAR 52.219-3, Notice of Total HUBZone Set-aside, will apply, which requires that at least 50 percent of the cost of personnel for contract performance be spent for employees of the concern. Contractors are also reminded that should this acquisition become a Service-Disabled Veteran-owned Small Business set aside, FAR 52.219-27, Notice of Total Service-Disabled Veteran-Owned Small Business Set-Aside, will apply, which requires that at least 50 percent of the cost of personnel for contract performance be spent for employees of the concern. All of the above must be submitted in sufficient detail for a decision to be made on a HUBZone set-aside or Service-Disabled Veteran-Owned Small Business set-aside. Failure to submit all information requested may result in Small Business set-aside acquisition. A decision on whether this will be pursued as a HUBZone Small Business set-aside, a Service-Disabled Veteran-Owned Small Business set-aside or a Small Business set-aside, will be posted in FedBizOpps website at http://www.eps.gov.. 3. REQUIREMENTS 3.1 General. Order tools listed below. 3.1.1 Order Tools. No. QTY UI Description Part Number Price Extended Price 1 1 KT Tool Kit, A, General Service 820 589 11 59/00 2 1 KT Tool Kit, S 4, Special Kit w/ Barring Device 550 589 03 99/00 3 1 KT Tool kit, S 4.1, Compression testing 550 589 09 21/00 4 1 EA Connection, Compression Tester 550 589 00 90/00 5 1 EA Measuring Jig, TDC Y4 272995 6 1 EA Dial Gauge f/ TDC Jig Y2 0002727 7 1 EA Record Cards f/ Compression Tester 550 589 09 21/06 8 1 EA V-Belt Tension Tester 550 589 01 19/00 9 1 EA "T" Wrench F3 0006093 10 1 EA Test Device, Charge Transfer Valves Y4 277011 11 1 KT Tool kit, S 5.1, Supplementary group 550 589 04 99/00 12 1 EA Drift 837 589 03 63/00 13 1 EA Flywheel Retaining Jig 553 589 01 63/00 14 1 EA Snap Ring Pliers f/ Piston Pin F3 0002759 15 1 EA Socket f/ Conrod Bolts F3 0370672 16 1 EA Ratchet Adapter f/ Conrod Bolts 820 589 28 61/05 17 1 EA Extension 820 589 28 61/02 18 1 EA Assembly Jig f/ Conrod Bearings F6 457261 19 2 EA Alignment Pin f/ Cylinder Head F3 0140348 20 1 EA Cylinder Head Alignment Jig (6V & 8V) F6 372534 21 1 EA Pronged Wrench f/ Protective Sleeve F3 0277507 22 1 EA Hydraulic Pressure Testing Jig 550 589 00 25/00 23 1 EA Valve Seat Cutting Tool 550 589 05 99/00 24 1 EA Valve Guide Installation Device F6 376569 25 1 EA Honing Tool Model 1040 F7 0097760 26 1 EA Honing Reamer Model 402 F3 0375837 27 1 EA Adapter, 11 - 20 mm F7 0097762 28 1 EA Chuck Model 311-30 F7 0032620 29 1 EA Alignment Bushing 13.97 mm F7 0097763 30 1 EA Alignment Bushing 14.01 mm F6 550755 31 1 EA Valve Guide Drift 837 589 07 43/00 32 1 EA Valve Guide Gauge 14 mm H7 837 589 15 21/00 33 1 EA Valve Guide Gauge 14 mm H9 Y2 0097213 34 1 EA Valve Seat Insert Installation Mandrel, Intake F6141944 35 1 EA Valve Seat Insert Installation Mandrel, Exhaust F6141943 36 1 EA Core Plug Drift, 16 mm F3 0096498 37 1 EA Core Plug Drift, 20 mm F3 0372184 38 1 EA Core Plug Drift, 28 mm F3 0096497 39 1 EA Core Plug Drift, 40 mm F3 0096496 40 1 EA Valve Seat Countersink, Intake 550 589 00 51/00 41 1 EA Valve Seat Countersink, Exhaust 550 589 01 51/00 42 1 EA Countersink f/ Injector to Sleeve Interface F3 0370165 43 1 EA Expander Sleeve, Valve Seal F3 0372974 44 1 EA Push-In Drift, Valve Seal F3 0372973 45 1 EA Socket Adapter, 22 mm F3 0374242 46 1 EA Valve Seat Insert Puller F6 456296 47 1 EA Guide Sleeve f/ Ring Carrier F6 370980 48 1 EA Alignment Bushing f/ Thrust Bearing & Washer F6 344533 49 1 EA Measuring Jig, Axial Clearance Y4 270705 50 1 EA Socket Adapter f/ Turbine Wheel F3 0279252 51 1 EA Ratchet F3 0006212 52 1 EA Installation/Removal Jig, Compressor Wheel F0 099976 53 1 ST Feeler Gauge, Gap Clearance 511 589 00 21/00 54 1 EA Retaining Jig f/ Drive Gear Nut F6 095294 55 1 EA Ring Wrench, 50 mm F3 0005658 56 1 EA Special Ring Wrench, 17 mm 550 589 01 03/00 57 1 EA "0" Position Locking Pin Y4 279231 58 1 EA Locking Jig, Injection Timing Adjustment F6 451943 59 1 EA Socket Adapter, 36 mm Stress Bolts F3 0004979 60 1 EA Locking Jig f/ Pump Gear 553 589 00 63/00 61 1 EA Axial Seal Installation Sleeve F3 0376821 62 1 EA Shaft Seal Installation Mandrel F3 0149065 63 1 EA Puller f/ Pump Impeller F6 375332 64 1 EA Installation Mandrel, Angular Contact Bearing 550 589 01 15/00 65 1 EA Installation Mandrel, Pump Shaft F3 0140768 66 1 EA Lug Wrench, Grooved Nut F3 0371725 67 1 EA Installation Mandrel, Counter Ring 820 589 20 43/00 68 1 EA Assembly/Disassembly Jig, V Belt Pully 550 589 03 90/00 69 1 EA Puller f/ Bearing Inner Race F3 0029884 70 1 EA Puller f/ Impeller F6 147633 71 1 EA Installation Mandrel f/ Grooved Bearing F3 0370264 72 1 EA Handle f/ Mandrel 820 589 39 31/00 73 1 EA Installation Mandrel f/ Counter Ring F3 0278300 74 1 EA Receiving Ring f/ Pump Shaft F6 342739 75 1 EA Installation Mandrel f/ Shaft Seal F3 0277006 76 1 EA Installation Mandrel f/ Bearing Inner Race F3 0140768 77 1 EA Circlip Pliers f/ Circlips in Generator Drive Housing F3 0002760 78 1 EA Circlip Pliers f/ Circlips in Pump Housing F3 0372352 79 1 EA Installation/Removal Jig f/ Coupling Section 550 589 01 90/00 80 2 EA Guide Pins f/ Plate Pack Installation/Removal F6 454892 81 1 EA Adapter f/ Pressure Relief Valve B8 0098560 82 1 EA Extractor f/ Locating Pins in Oil Filter Support F3 0276423 83 1 EA Pressure Gauge, 0 - 16 bar, f/ Test Pump Y2 0037753 84 1 EA Installation Mandrel f/ Shaft Seal F3 0370269 85 1 EA Handle f/ Mandrel 820 589 39 31/00 86 1 EA Vernier Caliper, 160 mm Y2 0001743 87 1 EA Depth Gauge, 200 mm Y2 0000918 88 1 EA Adjusting Ring, 14 mm Y2 0000167 89 1 EA Adjusting Ring, 165 mm Y2 0004310 90 1 ST Bore Gauge, 12 - 20 mm Y2 0010042 91 1 ST Bore Gauge, 160 - 280 mm Y2 0091483 92 1 EA Dial Gauge, 10 mm Range Y2 0011268 93 1 EA Magnetic Stand f/ Dial Gauge 001 589 03 21/00 94 1 AS Lifting Gear, Complete Engine (6V, 8V & 12V) T8 0090170 95 1 AS Lifting Gear, Frame/Intercooler, 4 Chain Hooks T8 0090233 96 4 EA Eyebolts 000580 016002 97 1 EA Lifting Gear, Oil Pan (6V & 8V) T8 0090358 98 1 EA Installation Jig f/ Gear Shaft 550 589 01 33/00 99 1 EA Magnetic Stand f/ Gear Shaft Elongation Measurement 837 589 12 21/00 100 1 EA Aluminum Mandrel f/ Idler Gear Removal 820 589 23 61/00 101 1 EA Jig f/ Bearing Cap Stud Elongation Measurement 837 589 05 21/00 102 2 EA Socket Adapter, 32 mm F3 0375246 103 2 EA Ratchet Wrench F3 0375251 104 1 EA "T" Wrench f/ Studs 837 589 05 09/00 105 1 EA Installation Mandrel f/ Injection Pump Drive 838 589 04 43/00 106 1 EA Installation Mandrel f/ Generator Idler Gear F3 0278208 107 1 EA Installation Mandrel f/ Coolant Pump Idler Gear, CC F3 0279919 108 1 EA Installation Mandrel f/ Coolant Pump Idler Gear, EC F3 0373722 109 1 EA Installation Mandrel f/ Roller Bearing Inner Race F3 0279920 110 1 EA Puller f/ Roller Bearing F3 0272092 111 1 EA Clamp f/ Coolant Pump Idler Gear F3 0370320 112 1 EA Clamp f/ Generator Idler Gear, CC F3 0272095 113 1 EA Clamp f/ Generator Idler Gear, BC F3 0272096 114 1 EA Installation Mandrel f/ 100 mm Core Plug F3 0375449 115 1 EA Installation/Removal Jig f/ Camshaft Bearings (6V & 8V) F6 143556 116 1 EA Installation/Removal Jig f/ Injection Pump Drive F6 550789 117 1 EA Installation Mandrel, Cap, 50 mm F3 0149484 118 1 EA Roller Expander, Cap, 50 mm F3 0014764 119 4 EA Protective Sleeve f/ Crankshaft Installation 837 589 00 14/00 120 1 EA Puller f/ Main Be3aring Caps F6 378995 121 1 EA Angle-of-Rotation Torque Jig f/ Conrod Bolts 838 589 18 59/00 122 1 EA Puller f/ Crankshaft Gear 550 589 04 33/00 123 1 EA Installation Wedge f/ Lower Main Bearing Shells 837 589 19 63/00 124 1 EA Test Jig f/ Cooling Oil Spray Nozzles Y4 272996 125 1 EA Swaging Tool, 45 mm Core Plug F3 0276905 126 1 EA Swaging Tool, 63 mm Core Plug F3 0270376 127 1 EA Plug Gauge f/ 45 mm Core Plugs Y2 0094017 128 1 EA Plug Gauge f/ 63 mm Core Plugs Y2 0033119 129 1 EA Installation Mandrel f/ 45 mm Core Plugs F3 0276045 130 1 EA Installation Mandrel f/ 63 mm Core Plugs F3 0276046 131 1 EA Sealing Tube Swaging Tool, 8V, 54 mm F3 0147397 132 1 EA Sealing Tube Swaging Tool, 8V, 82 mm F3 0270381 133 1 EA Swaging Tool Support, 8V F6 279439 134 1 EA Swaging Tool Support, 8V F6 342727 135 1 EA Ratchet f/ Swaging Tool F3 0006211 136 1 EA Boring Tool f/ 45 mm Core Plugs F6 347298 137 1 EA Boring Tool f/ 63 mm Core Plugs F6 348763 138 1 EA Puller f/ Sealing Tubes F6 341641 139 1 EA Sealing Tube Removal Jig F6 379020 140 1 EA Butting Ring Puller F3 0374018 141 1 EA Percussion Tube f/ Butting Ring F3 0372162 142 1 EA Holding Jig, Piston F6 550799 143 1 EA Angle-of-Rotation Measuring Jig f/ Conrod Bolts Y2 0044010 144 1 EA Installation Mandrel f/ Spring Pin F3 0149541 145 1 EA Magnetic Grip f/ Main Bearing Lower Shell F3 0278327 146 1 EA Extraction Hook f/ Main Bearing Lower Shell F3 0278328 147 1 EA Extraction Hook f/ Main Bearing Upper Shell F6 347328 148 1 EA Installation Jig f/ Inserting Shaft Seal F3 0375770 149 1 EA Installation Jig 520 027/0 150 1 EA Flange F6 345881 151 1 EA Thrust Bushing F6 345858 152 1 EA Hydraulic Nut B8 0141489 153 1 EA Intermediate Ring F6 345893 154 1 EA Puller Spindle M30 x 1.5 F6 345860 155 1 EA Nut M36 x 3 B8 0098529 156 1 EA Adapter M12 x 1.5 to 1/4" B8 0141288 157 1 EA Puller f/ Flywheel Bearing F3 0277690 158 1 EA Puller, Track Ring F6 451940 159 1 EA Installation Jig, Hub, Oil Hand Pump F0 098339 160 1 EA Installation/Removal Jig, Flywheel F0 097266 161 1 EA Alignment Jig Y4 276250 162 1 EA Thrust Bushing F6 374263 163 1 EA Puller, Spindle, M36 x 1.5 F6 374262 164 1 EA Connector, M12 x 1.5 B8 0098530 165 1 EA Hex Nut, M45 x 2 B8 0141628 166 1 EA Installation/Removal Jig 550 589 07 33/00 167 1 EA H/P Housing 000 589 01 90/00 168 1 EA Adapter, M12 x 1.5/5/R 1/4" B8 0099084 169 1 EA Torque Wrench F3 0273549 170 1 EA Power Amplifier F3 0005695 171 1 EA Union, Blanking Bracket 915006 006000 172 4 EA Plug, Blanking Bracket 000908 014001 173 1 EA Hydraulic Nut, M45 x 2 B8 0144155 174 5 EA Blanking Bracket, Main Bearing Y4342046 175 5 EA Sealing Ring, Blanking Bracket Y4342072 176 4 ST Blanking Pin Set, Crank Pin Y4 278616 177 1 EA Retaining Jig, M36 x 1.5 F6 375399 178 1 EA Installation/Removal Jig, Hydraulic, Engine Flange F0 098345 179 1 EA Thrust Plate F6 379012 180 1 EA Hydraulic Jack B80099402 181 1 EA Draw Spindle, M36 x 1.5 F6345882 182 1 EA Adapter, M12 x 1.5/5/R 1/4" B8 0140881 183 1 EA Marking Jig, Butting Ring F6 372949 184 1 EA Alignment Jig, Grooved Ball Bearing F6 372950 185 1 EA Installation Jig, Support Bearing F0 098252 186 1 EA Guide Sleeve f/ Camshaft Installation/Removal F6 370990 187 1 EA Locking Jig f/ Idler Gears F6 454957 188 1 EA Locking Jig f/ Camshaft, Flywheel End 550 589 04 59/00 189 1 EA Measuring Jig f/ valve lift, overlap Y4 096573 190 1 EA Assembly Jig f/ Oil Pump, Complete 553 589 00 31/00 191 1 EA Installation/Removal Jig f/ Bearing Bushings 550 589 01 43/00 192 1 EA Jig Stand f/ Assembly 839 589 10 31/00 193 1 EA Assembly Jig, F56 Geislinger Coupling, Complete F0 098347 194 1 EA Guide Pin M16 F3 0375020 195 1 EA Guide Pin M20 F3 0374315 196 1 EA Press B8 0094180 197 2 EA Pressure Testing Device, Cover/Housing (8V) Y4 098728 198 1 EA Cover Plate Y4 098729 199 1 EA Plate Y4 097638 200 1 EA Plate Y4 098727 201 2 EA Plug B8 0092247 202 1 EA Plug B8 0090841 203 1 KT Tool Kit, Cylinder Removal 550 589 11 99/00 204 1 EA Lukas Press B8 0094 180 205 2 KT Pump Set, 3000 bar B8 0146 887 206 2 KT Pump Set, 1000 bar B8 0146 893 207 2 KT Pump Set, 1000 bar (high volume) B8 0146 898
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DHS/USCG/COUSCGMLCA/HSCG80-11-Q-3HB002/listing.html)
- Record
- SN02474476-W 20110618/110616234432-56f2749463d9e34dcb5af030c7d64592 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |