SOLICITATION NOTICE
28 -- AIRCRAFT AIRFRAME FRONT, NSN 2840-01-456-0085, PN9343M40G19
- Notice Date
- 4/21/2011
- Notice Type
- Presolicitation
- Contracting Office
- DEFENSE LOGISTICS AGENCY; DLR PROCUREMENT OPS DSCR-ZBA;3001STAFF DRIVE; TINKER AFB; OK; 73145
- ZIP Code
- 73145
- Solicitation Number
- SPRTA1-11-R-0183-0002
- Response Due
- 2/28/2011
- Point of Contact
- Deborah Teubert, Phone 405-734-8107, Fax - -, Emaildeborah.teubert@tinker.af.mil
- E-Mail Address
-
Deborah Teubert
(deborah.teubert@tinker.af.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- The purpose of this amendment is to change the IDIQ quantityrequirements as follows: FROM: Due to a change in requirements change the IDIQ quantity changesas follows:: PREAMBLE NOTES: This solicitation contemplates award of an IndefiniteDelivery/Indefinite Quantity type contract (see Clauses at 52.216-18,"Ordering," 52.216.19, "Order Limitations" and 52.216-22, "IndefiniteQuantity"). The Best Estimated Quantity (BEQ) for this solicitation reflects theestimated requirement for a 3 year (36 month) period. Any resultantcontract shall be in effect from the effective date of the contractthrough a 3-year (36 month) period or until the maximum quantity isexhausted, whichever comes first. Evaluation for award will be made based only on the proposed pricesubmitted for the Best Estimated Quantity (BEQ). Offers for MinimumQuantity, Minimum Order Quantity, Minimum Delivery Order Quantity orMaximum Delivery Order Quantity if made will be disregarded. Evaluationof the award will be based on the proposed unit price for the BEQquantity and those provisions set out in Section M. Offers as to delivery should be made based upon the required number ofunits per month reflected under "Required Delivery" and "ProposedDelivery" in Section B below. Subsequent order delivery for futureorders shall be addressed in this same Section. First Article Note: First article offerors will be accepted under BidA (CLINs 0001AA, 0001AB, 0001AC, 0001AD and 0001AE). If your companymeets the condition for First Article waiver, please propose on Bid B9(CLINS 0001AC and 0001AF). For those offerors proposing under BID A (First Article Required) Best Estimated Quantity (for the entire contract period): _260__ EA (257EA under CLIN 0001AE, 3 EA as part of First Article CLIN 0001AD) Minimum Quantity (to be ordered against the contract without obligationof placing additional orders): _133_ EA (153 EA under CLIN 0001AE, 3 EAas part of First Article CLIN 0001AD) Maximum Quantity (cumulative quantities for all orders against thecontract, cannot be exceeded): _390 EA (387 EA under CLIN 0001AE, 3 EAas part of First Article CLIN 0001AD) Minimum Delivery Order Quantity (the minimum amount to be placed on anindividual order - contractor concurrence required for lesser quantity):_22 EA Maximum Delivery Order Quantity (the maximum amount to be placed on anindividual order - contractor concurrence required for greaterquantity): _133 EA For those offerors proposing under BID B (First Article NOTE Required) Best Estimated Quantity (for the entire contract period): _260__ EA (246CLIN 0001AF) Minimum Quantity (to be ordered against the contract without obligationof placing additional orders): _133_ EA (under CLIN 0001AF) Maximum Quantity (cumulative quantities for all orders against thecontract, cannot be exceeded): _390 EA (under CLIN 0001AF) Minimum Delivery Order Quantity (the minimum amount to be placed on anindividual order - contractor concurrence required for lesser quantity):_22 EA Maximum Delivery Order Quantity (the maximum amount to be placed on anindividual order - contractor concurrence required for greaterquantity): _133 EA TO: Ordering requirements as changed to as follows: The Best Estimated Quantity (BEQ) for this solicitation reflects theestimated requirement for a 3 year (36 month) period. Any resultantcontract shall be in effect from the effective date of the contractthrough a 3-year (36 month) period or until the maximum quantity isexhausted, whichever comes first. Evaluation for award will be made based only on the proposed pricesubmitted for the Best Estimated Quantity (BEQ). Offers for MinimumQuantity, Minimum Order Quantity, Minimum Delivery Order Quantity orMaximum Delivery Order Quantity if made will be disregarded. Evaluationof the award will be based on the proposed unit price for the BEQquantity and those provisions set out in Section M. Offers as to delivery should be made based upon the required number ofunits per month reflected under "Required Delivery" and "ProposedDelivery" in Section B below. Subsequent order delivery for futureorders shall be addressed in this same Section. First Article Note: First article offerors will be accepted under BidA (CLINs 0001AA, 0001AB, 0001AC, 0001AD and 0001AE). If your companymeets the condition for First Article waiver, please propose on Bid B9(CLINS 0001AC and 0001AF). For those offerors proposing under BID A (First Article Required) Best Estimated Quantity (for the entire contract period): _206__ EA (203EA under CLIN 0001AE, 3 EA as part of First Article CLIN 0001AD) Minimum Quantity (to be ordered against the contract without obligationof placing additional orders): _94_ EA (91 EA under CLIN 0001AE, 3 EAas part of First Article CLIN 0001AD) Maximum Quantity (cumulative quantities for all orders against thecontract, cannot be exceeded): _309 EA (309 EA under CLIN 0001AE, 3 EAas part of First Article CLIN 0001AD) Minimum Delivery Order Quantity (the minimum amount to be placed on anindividual order - contractor concurrence required for lesser quantity):_17 EA Maximum Delivery Order Quantity (the maximum amount to be placed on anindividual order - contractor concurrence required for greaterquantity): _104 EA For those offerors proposing under BID B (First Article NOTE Required) Best Estimated Quantity (for the entire contract period): _206__ EA(CLIN 0001AF) Minimum Quantity (to be ordered against the contract without obligationof placing additional orders): _94_ EA ( CLIN 0001AF) Maximum Quantity (cumulative quantities for all orders against thecontract, cannot be exceeded): _309 EA Minimum Delivery Order Quantity (the minimum amount to be placed on anindividual order - contractor concurrence required for lesser quantity):_17 EA Maximum Delivery Order Quantity (the maximum amount to be placed on anindividual order - contractor concurrence required for greaterquantity): _104 EA
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/AFMC/OCALCCC/SPRTA1-11-R-0183-0002/listing.html)
- Record
- SN02430698-W 20110423/110421235127-9b6870e86756fc04aaf98d2e8a81dba8 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |