SOLICITATION NOTICE
J -- NOZZLE SEGMENT,TURB
- Notice Date
- 4/14/2011
- Notice Type
- Presolicitation
- NAICS
- 336412
— Aircraft Engine and Engine Parts Manufacturing
- Contracting Office
- DEPARTMENT OF THE AIR FORCE; BLDG 3001 SUITE 2AH82A; TINKER AFB;OK; 73145
- ZIP Code
- 73145
- Solicitation Number
- FA8122-11-R-0006
- Response Due
- 4/20/2011
- Point of Contact
- Billie Kindschuh, Phone 405-734-4631, Fax 405-739-3464, Emailbillie.kindschuh@tinker.af.mil
- E-Mail Address
-
Billie Kindschuh
(billie.kindschuh@tinker.af.mil)
- Small Business Set-Aside
- N/A
- Description
- THIS COMBINED SYNOPSIS/SOLICITATION IS POSTED UNDERFA8122-11-R-0006-0002.This is a combined synopsis/solicitation for commercial servicesprepared in accordance with the format in Subpart 12.6, as supplementedwith additional information included in this notice. This announcementconstitutes the only solicitation; proposals are being requested and awritten solicitation will not be issued. This solicitation document,incorporated provisions and clauses are those in effect through FederalAcquisition Circular (FAC) 2005-24 dated 28 Feb 08. The PurchaseRequest number is FD2030-11-36408. The solicitation number isFA8122-11-R-0006. The requirement is for Remanufacture of F108 LPTNozzle Segments. The solicitation is a request for proposals (RFP).Proposals will be received at the issuing office until 3:00 PM CentralStandard Time on 20 Apr. 2011. Proposals shall be submitted via mail,fax or e-mail to the party identified in the last section of thiscombined synopsis/solicitation. Qualified sources are GEES, Cincinnati, OH (062W2), Chromalloy Nevada,Carson City, NV (0UEH6), Chromalloy Component Services, Inc., SanAntonio, TX (1LKE9), CFM International, Cincinnati, OH (58828),Propulsion Technologies, Miami, FL (1GE54), and Snecma Services, France(F6048). All responsible sources solicited may submit a proposal thatshall be considered. Award will be made only if the product/service orthe offeror meets qualification requirements at the time of award IAWFAR clause 52.209-1. Interested persons may identify their interest andcapability to respond to the requirement or submit proposals. Thissolicitation document incorporates provisions and clauses that are ineffect in the Federal Acquisition Regulations and supplements on thedate the solicitation is issued. The North American IndustryClassification System Code (NAICS) is 336412. Line Item 0001: Input NSN: 2840-01-438-9420PN, P/N 2002M64G02 and/or2080M29G01/02/03 and/or CN2002M64G02-1; NSN: 2840-01-339-6142PN, P/N:1317M36G04/05, and/or 1441M29G06 and/or 9527M50SERIES; NSN:2840-01-466-9348, P/N: 1285M97G01/G03 and/or 1317M36G01/G03 and/or9527M50G01/G03; NSN: 2840-01-206-9818PN, P/N: 9511M43G10/14/15; NSN:2840-01-439-1262PN, P/N: 1476M30G01/05/07; NSN: 2840-01-253-1391PN, P/N:1285M96SERIES and/or 1319M96SERIES and/or 9511M43G06/G11 and/or9993M75G14/G15; NSN: 2840-01-274-9388PN, P/N: 1385M70G02. Output NSN:2840-01-438-9420PN, P/N: 2080M29G01/02/03. Noun: Heavy RemanufactureF108 Nozzle Segments. Quantity: 920 EA. Required Delivery: 230 EA30 Days After Receipt of Repairable. Inspection and Acceptance of LineItem 0001 shall be FOB Origin. Inspection and Acceptance Report isReceiving Report. Applicable to F108 Engine, KC-135R Aircraft.Destination: Tinker AFB, OK 73145-3032. Heavy Remanufacture consistes of replacement/modification of all partnumber nozzle segments prior to P/N 2080M29G03 by replacing the X-40material vane airfoils and outer band platforms with new material inaccordance with CFM56-2B, SB 72-598R1 and Repair Document (RD) 172-96 orhigher. This also includes anything necessary in light repair. Line Item 0002: Input NSN: 2840-01-438-9420PN, P/N 2002M64G02 and/or2080M29G01/02/03 and/or CN2002M64G02-1; NSN: 2840-01-339-6142PN, P/N:1317M36G04/05, and/or 1441M29G06 and/or 9527M50SERIES; NSN:2840-01-466-9348, P/N: 1285M97G01/G03 and/or 1317M36G01/G03 and/or9527M50G01/G03; NSN: 2840-01-206-9818PN, P/N: 9511M43G10/14/15; NSN:2840-01-439-1262PN, P/N: 1476M30G01/05/07; NSN: 2840-01-253-1391PN, P/N:1285M96SERIES and/or 1319M96SERIES and/or 9511M43G06/G11 and/or9993M75G14/G15; NSN: 2840-01-274-9388PN, P/N: 1385M70G02. Output NSN:2840-01-438-9420PN, P/N: 2080M29G01/02/03. Noun: Light RemanufactureF108 Nozzle Segments. Quantity: To Be Determined. Required Delivery:230 EA 30 Days After Receipt of Repairable. Inspection and Acceptanceof Line Item 0002 shall be FOB Origin. Inspection and Acceptance Reportis Receiving Report. Applicable to F108 Engine, KC-135R Aircraft.Destination: Tinker AFB, OK 73145-3032. Light remanufacture consists of rework of the nozzle segments inaccordance with SB 72-0582, SB 72-0610 and SB 72-0614. This alsoincludes all repairs established in CMM 72-15-01, with the exception ofthose listed in heavy remanufacture. Line Item 0003: CAV AF Data Reporting IAW CDRL A001 and DID. Line Item 0004: AFMC 413 Depot Production Maintenance Reporting IAWCDRL A002 and DID. Line Item 0005: Test Report IAW CDRL A003 and DID. Packaging Requirements: Items shall be packed in accordance withMIL-STD-2073-1 D, Standard Practice for Military Packaging. AFMCFARS5352.247-9009 Military Packaging and Marking applies. Shipping andstorage markings shall be in accordance with MIL-STD-129 P, StandardPractice for Military Marking. The MIL-STD-2073-1 SPI/Specifications isas follows: PACRN-PAA, PRESERVATION LVL - MIL, PACKING LVL - M, QUP -001. Military Packaging Requirement: QUP - 001; ICQ - AAA; PRES METH -10; CD - 1; PRES MTL - 00; WRAP MTL - JA; CUSH DUNN - NA; CT - X; UNITCONT - DA; INT CONT - EC; UCL - M; SPEC MKG - 00; UNIT PACK WEIGHT -1.5; UNIT PACK SIZE: LENGTH - 8.0; WIDTH - 6.0; DEPTH - 04.0; UNIT PACKCUBE: WHOLE CUBE - 0000.111; OPI - O. Evaluation method will be Price Performance Tradeoff (PPT). Evaluationfactors will be (a) technical - meets solicitation requirements(pass/fail); (b) price; (c) past performance. Past Performance shall beconsidered significantly more important than price as an evaluationfactor. Offerors are required to follow the instructions in theattached Section L - Instructions To Offerors and Section M - EvaluationFactors For Award. DESCRIPTION: The high pressure turbine assembly is composed of 23 echhigh pressure turbine nozzle segments. The nozzle segments are joinedend to end to form a 360 degree ring making the high pressure turbinenozzle assembly. Two vanes per segment are brazed to an inner and outershroud to form the high pressure turbine nozzle segment assembly. Thevanes are composed of two cast shells dividied into forward and aftcompartments by an inner rib. The vane segments as well as the innerand outer platforms have cooling holes drilled through their surfaces.FUNCTION: The high pressure turbine nozzle assembly and its individualnozzle segments redirect high temperature combustion gasses from thecombustion chamber onto the high pressure turbine rotor assembly.MATERIAL: DSR 142 material, Rene 41/142, Hastelloy. DIMENSIONS:approximately 2 inches wide by 3 inches long by 5 inches high. Weightis 3 pounds. RMC: R1C. Electronic procedures will be used for this combinedsynopsis/solicitation through FedBizOpps at http://www.fbo.gov. The following FAR provisions and clauses apply to this solicitation andare incorporated by reference. FAR 52.209-1, Qualification Requirements (Feb 1995); FAR 52.211-14, Notice of Priority Rating for National Defense, EmergencyPreparedness, and Energy Program Use. (Apr 2008);FAR 52.211-15, Defense Priority and Allocation Requirements. (Apr 2008);FAR 52.212-1, Instructions to Offerors-Commercial Items (Apr 2008); FAR 52.212-2, Evaluation-Commercial Items (Jan 1999); FAR 52.212-3, Offerors, Representations and Certifications-CommercialItems (May 2001) A completed copy of the Offeror Representations andCertifications must be included with the proposal unless the offeror isregistered in ORCA; FAR 52.212-4, Contract Terms and Conditions-Commercial Items (Feb 2007); FAR 52.212-5, Contract Terms and Conditions Required to ImplementsStatues or Executive Orders-Commercial Items (Apr 2008); FAR 52.203-6, Restrictions on Subcontractor Sales to the Government (Sep2006); FAR 52.209-9, Updates of Publicly Available Information RegardingResponsibility Matters (Jan 2011) and Alternate I (Jan 2011);FAR 52.219-8, Utilization of Small Business Concerns (May 2004) andAlternate II (Oct 2001); FAR 52.219-9, Small Business Subcontracting Plan (Apr 2008) and Alt II(Oct 2001); FAR 52.219-16, Liquidated Damages-Subcontracting Plan (Jan1999); FAR 52.222.21, Prohibition of Segregated Facilities (Feb 1999); FAR 52.222-26, Equal Opportunity (Feb 1999); FAR 52.222-35, Affirmative Action for Disabled Veterans and Veterans ofthe Vietnam Era (Apr 1998); FAR 52.222-36, Affirmative Action for Workers with Disabilities (Jun1998); FAR 52.222-37, Employment Reports or Disabled Veterans and Veterans ofthe Vietnam Era (Jan 1999); FAR 52.222-39, Notification of Employee Rights Concerning Payment ofUnion Dues or Fees (Dec 2004); FAR 52.222-50, Combating Trafficking in Persons (Aug 2007); FAR 52.225-13, Restriction on Certain Foreign Purchases (Feb 2006); FAR 52.232-33, Payment by Electronic Funds Transfer-Central ContractorRegistration (May 1999); FAR 52.237-11, Accepting and Dispensing of $1 Coin (Aug 2007); FAR 52.246-11, Higher-Level contract Quality Requirement (Feb 1999) ISO9001-2000 IAW PWS Para 1.6 (24 Apr 2008); FAR 52.247-29, FOB Origin (Jun 1988); FAR 52.252-4, Alterations in Contract (APR 1984); DFARS 252.212-7001, Contract Terms and Conditions Required to ImplementsStatues or Executive Orders Applicable to Defense Acquisitions ofCommercial Items (Mar 2008); DFARS 252.225-7000, Buy American Act-Balance of Payments ProgramCertificate (Sep 1999); DFARS 252.225-7001, Buy American Act and Balance of Payments Program(Mar 1998); DFARS 252.225-7014, Preference for Domestic Specialty Metals (Jun 2005)and Alt I; DFARS 252.225-7028, Exclusionary Policies and Practices ofForeign Government (Dec 1991); AFMCFARS 5352.247-9009, Military Packaging and Marking (Aug 2002); AFMCFARS 5352.291-9005 End Items Beyond Economical Repair (Jul 1997).The full text of any clause can be found at: http//:farsite.hill.af.mil. List of Attachments: TITLEDATEPAGESPerformance Work Statement7 Dec 20108Appendix B CAVAFUndated9Appendix C Safety10 Dec 20103Performance Plan11 Apr 20119Depot Maintenance CDRL6 Dec 20104CAVAF CDRL6 Dec 20104Test Report6 Dec 20106Packaging Requirement6 Dec 20102Section K Representations & CertificationsUndated4Section L Instructions to OfferorsUndated3Section M Evaluation Factors For AwardUndated3 Contact Billie Kindschuh at 405-734-4631 for information regarding thissolicitation. Proposals shall be submitted to 848 SCMG/PKAB ATTN BillieKindschuh, Bldg 3001 STE 1AF1 97E, Tinker AFB OK 73145 if mailed.Proposals may be faxed or submitted by e-mail. Fax number is405-739-3462. E-mail address is billie.kindschuh@tinker.af.mil.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/AFMC/OCALCCC/FA8122-11-R-0006/listing.html)
- Record
- SN02424725-W 20110416/110414234417-21ca83ad8d65580ed9757331276e1707 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |