Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
FBO DAILY ISSUE OF APRIL 09, 2011 FBO #3423
SOLICITATION NOTICE

H -- Laboratory Testing

Notice Date
4/7/2011
 
Notice Type
Presolicitation
 
NAICS
541380 — Testing Laboratories
 
Contracting Office
RDECOM Contracting Center - Aberdeen (RDECOM-CC), ATTN: AMSSB-ACC-A, 4118 Susquehanna Avenue, Aberdeen Proving Ground, MD 21005-3013
 
ZIP Code
21005-3013
 
Solicitation Number
W91CRB-11-R-0035
 
Response Due
4/22/2011
 
Archive Date
6/21/2011
 
Point of Contact
Karen Gibson, 4102785405
 
E-Mail Address
RDECOM Contracting Center - Aberdeen (RDECOM-CC)
(karen.gibson2@us.army.mil)
 
Small Business Set-Aside
N/A
 
Description
The United States Army Contracting Command (ACC-APG) intends to issue a Request for Quote (RFQ) for a firm-fixed price (FFP), commercial contract utilizing Federal Acquisition Regulations (FAR) 13.5. This requirement is in support of the US Army PM Soldier Protection & Equipment (PM SPE) and is a request for ballistic and stab testing on Type 1 and Type 2 Concealable Body Armor (CBA) vests. The main objective of this testing is to evaluate Key Performance Parameters (KPP) and Vest Characterization of each type vest (Type 1 / Type 2). 1. Testing must be conducted in a National Institute Justice (NIJ) certified laboratory. 2. Testing must be conducted in a lab certified by ATC. 3. The contractor shall provide certifications upon request. 4. The Government will furnish Type I and Type II vests, Knife Blades, Spikes, and Composite Backing Material. 5. The Contractor shall be required to furnish all labor, materials, ammunition and equipment necessary to provide testing in the following format: Type I Vest: 1. NIJ Ballistic Resistance of Body Armor Standard-0101.06 (July 2008) for both Type IIIA and Type III Projectiles. (Variables: shot locations, velocities, and conditioning requirements (pre-conditioning, tumbling, and hot and cold conditioning). 2. NIJ Stab Resistance of Personal Body Armor Standard-0115.00 (Sept 2000) Level I / spike / edge blade. Type II Vest: 1. NIJ Stab Resistance of Personal Body Armor Standard-0115.00 (Sept 2000) Level III / spike / edge blade. 2. Additional iterations of the protocol will be conducted on vests conditioned for hot and cold. Vest Characterization: Tests will be conducted to examine vest ballistic / stab / spike performance in additional situations. Additional environmental subtests, different caliber weapons, and additional levels of stab / spike energies will be tested over and above the KPP and Additional Performance Attribute requirements. The anticipated date of issue for the RFQ is on or about 29 April 2011. POC for this action is Karen Gibson, karen.gibson2@us.army.mil. Questions concerning this synopsis should be directed to the POC.
 
Web Link
FBO.gov Permalink
(https://www.fbo.gov/notices/4c2599966bd3b2fba402293469a60271)
 
Place of Performance
Address: RDECOM Contracting Center - Aberdeen (RDECOM-CC) ATTN: AMSSB-ACC-A, 4118 Susquehanna Avenue Aberdeen Proving Ground MD
Zip Code: 21005-3013
 
Record
SN02419900-W 20110409/110407234930-4c2599966bd3b2fba402293469a60271 (fbodaily.com)
 
Source
FedBizOpps Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  Jenny in Wanderland!  © 1994-2024, Loren Data Corp.