MODIFICATION
25 -- Ballistic Spall Liner
- Notice Date
- 3/24/2011
- Notice Type
- Modification/Amendment
- NAICS
- 325211
— Plastics Material and Resin Manufacturing
- Contracting Office
- RDECOM Contracting Center - Edgewood (RDECOM-CC), ATTN: AMSSB-ACC-E, 5183 Blackhawk Road, Aberdeen Proving Ground, MD 21010-5424
- ZIP Code
- 21010-5424
- Solicitation Number
- W911SR-11-SPALL
- Response Due
- 4/7/2011
- Archive Date
- 6/6/2011
- Point of Contact
- Erin Kreger, 410-436-4379
- E-Mail Address
-
RDECOM Contracting Center - Edgewood (RDECOM-CC)
(erin.kreger@us.army.mil)
- Small Business Set-Aside
- N/A
- Description
- This is a sources sought announcement. There is no solicitation available at this time. ECBC is seeking to identify potential sources who have the capability and experience to provide the following item: ballistic spall liner made of 42-ply, 745 Kevlar to fit Tactical Fire Fighting Truck. The Tactical Fire Fighting Truck (TFFT) is a large military vehicle based on an Oshkosh HEMTT. A ballistic spall liner is needed to protect the personnel in the front crew compartment of the vehicle. Please see the Spall Liner reference drawings 12551451, 12551456, and 12551457 associated with this announcement. These export of these drawings is restricted by the Arms Export Control Act (Title 22, U.S.C., Sec 2751, et.seq.) or the Export Administration Act of 1979, as amended, Title 50, U.S.C, App. 2401 et. seq. Violations of these export laws are subject to severe criminal penalties. Disseminate in accordance with provisions of DoD Directive 5230.25. This also applies to distribution of the drawings to all SUBCONTRACTORS at every level. To be eligible to gain access to export controlled drawings you must have a current DD 2345, Militarily Critical Technical Data Agreement certification on file with the Defense Logistics Information Service (DLIS). To obtain certification, go to http://www.dlis.dla.mil/jcp/, click on documents, and follow instructions provided. Processing time is estimated at three days after receipt. Upon receipt of certification, you may request access the drawings via FBO. Upon completion of the purposes for which Government drawings has been provided, the Contractor is required to destroy all documents, including all reproductions, duplications, or copies thereof as may have been further distributed by the Contractor. Destruction of these drawings shall be accomplished by: shredding, pulping, burning, or melting any physical copies of the TDP and/or deletion or removal of downloaded TDP files from computer drives and electronic devices, and any copies of those files. Interested parties are encouraged to submit a capability statement describing your company's previous experience with the manufacture of similar ballistic spall liners. The below information is required to be submitted with your response: 1.General Supplier Information: Business Name: ____________________________________________________ Address: __________________________________________________________ Phone: _____________________________ FAX: ______________________________ Point of Contact: ___________________________________________________ E-Mail Address: ____________________________________________________ CAGE: __________________DUNs Number: ______________________ Business Type (check all that apply): * 8(a) _____ * Disabled Veteran ______ * HUB Zone ______ * Large Business _____ * Minority Owned _______ * Small Business ______ * Small-Disadvantaged ______ * Women-Owned _____ What is an estimated production lead time required after receipt of an order (days)? What is the best way to mount the spall liner to the interior of the vehicle? Are there any other materials that can be used besides 42-ply, 745 Kevlar? What are the pros and cons of that material compared with the Kevlar? What is the estimated cost to produce and install spall liners of the size listed in drawings 12551451, 12551456, and 12551457? This sources sought notice is issued solely for informational and market research purposes and does not constitute a solicitation or the issuance thereof. All information received in response to this sources sought that is marked proprietary will be handled accordingly. Contractors are solely responsible for all expenses associated with responding to this notice. Interested sources should respond to Erin Kreger via fax; 410-306-3871 or e-mail; erin.kreger@us.army.mil. All responses should be received by the close of business on 7 April, 2011.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/2e6e8461cd9c6958189a175320f40079)
- Place of Performance
- Address: RDECOM Contracting Center - Edgewood (RDECOM-CC) ATTN: AMSSB-ACC-E, 5183 Blackhawk Road Aberdeen Proving Ground MD
- Zip Code: 21010-5424
- Zip Code: 21010-5424
- Record
- SN02408982-W 20110326/110324235009-2e6e8461cd9c6958189a175320f40079 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |