SOLICITATION NOTICE
12 -- Quarterly Preventative Maintenance on Fire Shutters - Solicitation
- Notice Date
- 9/13/2010
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 922160
— Fire Protection
- Contracting Office
- Department of the Army, U. S. Army Materiel Command, Anniston Chemical Agent Disposal Facility (ANCDF), 3580 MORRISVILLE ROAD, Anniston, Alabama, 36201, United States
- ZIP Code
- 36201
- Solicitation Number
- WA-FY11-AR-576
- Archive Date
- 9/23/2010
- Point of Contact
- Ashley Rollins, Phone: 256-238-0721 x 131
- E-Mail Address
-
ashley.rollins@wancdf.com
(ashley.rollins@wancdf.com)
- Small Business Set-Aside
- N/A
- Description
- QPM on Fire Shutters •1. Perform a drop test on the (47) fire shutters by pressing and holding the test button for approximately 10 seconds or until the shutter releases. •a. Verify that each shutter releases and completely drops. •b. If tensioning adjustment is required, adjust tensioning as per manufacturer's recommendation and retest. •c. Record the results on the attached spreadsheet in work order for each shutter. •2. Generally inspect each shutter for missing hardware, proper latching mechanism, shutter louvers are properly attached and aligned, and all required guards are in place. Record the results on the attached spreadsheet in work order for each shutter. •3. Inspect each shutters fusible link for corrosion or signs of physical damage. Record the results on the attached spreadsheet in work order for each shutter. •4. If lubrication is required, lubricate using Westinghouse provided white lithium grease (WA05246) (place grease in small container and apply using a small brush). Record the results on the attached spreadsheet in work order for each shutter. •5. Reset the shutter using the manufacturer's recommended method. •6. Vendor to provide Process Coordinator and Subcontract Administrator with a report to include calibration/inspection results, outstanding discrepancies and an outline of work performed within (14) days of completed visit. •7. Vendor will participate in the pre-job briefings to ensure that good communications are established with ANCDF Subcontracts, Engineering and Maintenance departments before any work begins. Extreme caution shall be taken to ensure that unplanned outages will not occur. •8. WA will provide an escort as necessary. •9. Vendor will provide (1) copy of calibration records for any calibration equipment that is used. •10. Vendor will provide the MSDS sheet for any chemical products brought on site. •11. Vendor will provide any special tools, test equipment and material, except Westinghouse provided white lithium grease (WA05246). Shutter Numbers 03-FPE-115-01 03-FPE-121-01 03-FPE-148-02 03-FPE-204-03 03-FPE-207-02 03-FPE-207-09 03-FPE-219-01 03-FPE-115-02 03-FPE-121-02 03-FPE-151-01 03-FPE-204-04 03-FPE-207-03 03-FPE-207-10 03-FPE-219-02 03-FPE-115-03 03-FPE-142-01 03-FPE-203-01 03-FPE-204-05 03-FPE-207-04 03-FPE-207-11 03-FPE-219-03 03-FPE-115-04 03-FPE-142-02 03-FPE-203-02 03-FPE-204-06 03-FPE-207-05 03-FPE-207-12 03-FPE-219-04 03-FPE-115-05 03-FPE-142-03 03-FPE-203-03 03-FPE-204-07 03-FPE-207-06 03-FPE-209-01 03-FPE-219-05 03-FPE-115-06 03-FPE-145-01 03-FPE-204-01 03-FPE-204-08 03-FPE-207-07 03-FPE-216-01 03-FPE-115-07 03-FPE-148-01 03-FPE-204-02 03-FPE-207-01 03-FPE-207-08 03-FPE-216-02
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/0be79d1f5bbb158c1bf159460038ec05)
- Place of Performance
- Address: 3580 Morrisville Road, Anniston, Alabama, 36201, United States
- Zip Code: 36201
- Zip Code: 36201
- Record
- SN02278842-W 20100915/100913234943-0be79d1f5bbb158c1bf159460038ec05 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |