SOLICITATION NOTICE
99 -- LASER MICRO-MACHINING SYSTEM
- Notice Date
- 8/18/2010
- Notice Type
- Presolicitation
- Contracting Office
- 16 Eglin StreetHanscom AFB, MA
- ZIP Code
- 00000
- Solicitation Number
- F2BBBJ0215A001
- Point of Contact
- Linda Wheeler linda.wheeler@hanscom.af.mil
- E-Mail Address
-
E-mail the POC
(linda.wheeler@hanscom.af.mil)
- Small Business Set-Aside
- N/A
- Description
- Contractor to provide a Laser Micro-Machining System. The system will be primarily used to machine Direct Bonded Copper on aluminum nitride. The copper thickness will be between 50 and 300 microns thick. Trenches from 40 microns to 200 microns wide need to be etched through the copper down to the substrate. The etching must result in near nertical walls with little to no copper buildup on either side of the trench. In other words, the remaining copper should become rectangular wires with no electrical short between them.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/AFMC/ESC/F2BBBJ0215A001/listing.html)
- Record
- SN02245660-W 20100820/100818235825-f666a5374e8899227701898f6b0ae013 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |