SOLICITATION NOTICE
20 -- Winch, drum,power
- Notice Date
- 7/26/2010
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 333923
— Overhead Traveling Crane, Hoist, and Monorail System Manufacturing
- Contracting Office
- Department of Homeland Security, United States Coast Guard (USCG), USCG Surface Forces Logistics Center (SFLC), 2401 Hawkins Point Road, Building 31, Mail Stop 26, Baltimore, Maryland, 21226-5000, United States
- ZIP Code
- 21226-5000
- Solicitation Number
- HSCG40-10-Q-AN031
- Archive Date
- 8/20/2010
- Point of Contact
- Keith A Wakefield, Phone: 410-762-6220
- E-Mail Address
-
keith.m.wakefield@uscg.mil
(keith.m.wakefield@uscg.mil)
- Small Business Set-Aside
- N/A
- Description
- The USCG Surface Forces Logistics Center has a requirement for four (04) each of the following item: KLASSIC CLONE HU-40 PNEUMATIC DRUM WINCH WITH THE FOLLOWING MODIFICATIONS AND REQUIREMENTS: A. DRUM MODIFICATION- THE CONTRACTOR SHALL FURNISH A 316 STAINLESS STEEL TWO PIECE DRUM SADDLE THAT SHALL BE INSTALLED OVER THE EXISTING 7" DRUM BARREL THAT WILL INCREASE THE DIAMETER TO 9 1/2" TO ACHIEVE A D/D RATIO OF NO LESS THAN 16:1 WHEN USED WITH 5/8" WIRE ROPE. THE DRUM SADDLE SHALL BE FASTENED IN PLACE OVER THE EXISTING DRUM BARREL WIITH 316 S.S. HARDWARE. THE SADDLE SHALL ALLOW FOR PROPER ANCHORING OF THE WIRE ROPE. B. WINCH SHALL BE SUBJECTED TO A STANDARD OPERATIONAL LOAD, SPEED AND BRAKE TEST USING ANSI B30.7 AS GUIDANCE. THE TEST READINGS SHALL BE DOCUMENTED AND A COPY PROVIDED WITH EACH WINCH. THE DATA PLATE SHALL BE STENCILED FOR USE WITH 5/8" WIRE AND CAPACITY. C. WINCH SHALL BE PAINTED WITH A TOP COAT OF BLACK SILICON ALKYD ENAMEL PAINT APPLIED AT 2-3 MILS DRY FILM THICKNESS OVER THE STANDARD OFFSHORE COATING SYSTEM. THE PAINT SHALL MEET MIL-PRF-24635D TYPE II, CLASS 1, COLOR: BLACK (17038) TO FEDERAL STANDARD 595C. D. WINCH SHALL BE PROVIDED WITH ONE 90 DEGREE 1 1/4" GALVANIZED STEEL STREET ELBOW, ONE DISCHARGE AIR MUFFLER MANUFACTURED BY NORGREN PART NUMBER MBP10A AND AN AIR FILTER DRIER. E. THE CONTRACTOR SHALL PROVIDE A TECHNICAL MANUAL WHICH SHALL COVER AT A MINIMUM: OPERATION, SAFETY, PARTS LIST, MAINTENANCE AND GENERAL ARRANGEMENT DRAWING RELECTING THE NEW CONFIGERATION AND WIRE SIZE. F. THE WINCH SHALL BE DRAINED OF OIL, EACH PORT PLUGGED OR CAPPED AND TAGGED. WINCH SHALL BE INDIVIDUALLY PACKED IN AN 8 MIL POLYETHYLENE BAG AND THEN BOLT TO THE SHIPPING SKID. THE BAG OPENING SHALL BE SINCHED CLOSED WITH AN APPROPRIATE SIZE PLASTIC TIE. G. THE SHIPPING CONTAINER MARKING SHALL BE STENCILED AS FOLLOWS: 3950-01-566-3921 WINCH, DRUM, POWER OPERATED HU40-REMAN- 9.5 SERIAL NUMBER: SFLC MATERIAL 1 EACH CONDITION CODE A It is anticipated that a non-competitive sole source purchase order will be issued for this item to Ram Winch and Hoist Co. It is the Government's belief that only Ram Winch and Hoist Co., or one of its authorized distributors can furnish the required parts and ensure the proper fit, form and function of all its components. Concerns having the expertise and required capabilities to furnish the above items are invited to submit complete information discussing the same in duplicate within 5 days of this announcement. However, other potential sources desiring to furnish other than Ram Winch and Hoist Co. equipment are required to submit the following information: 1) Complete and current engineering data to demonstrate the acceptability of the offered parts (i.e. salient physical, functional and serviceability characteristics) or 2) Data that the offered parts have been satisfactorily manufactured for the government or the original equipment manufacturer. This data must include sufficient information to allow the Coast Guard to evaluate the proposal relative to the above requirements. Concerns that respond to this notice must fully demonstrate the capability to accomplish the above and are to supply pertinent information in sufficient detail to demonstrate a bona fide capability to meet the requirement. The submission of this data for review shall not impede award of this contract. The Coast Guard does not intend to pay for information solicited. The anticipated Award Date for this procurement is 6 August 2010. This is a combined Synopsis/Solicitation for Commercial Items and is issued in accordance with the format in subpart 12.6 of the FAR, as supplemented with additional information included in this notice and pursuant to FAR Part 6.302-1,HSAM 3006.302-1 and FAC No. 2005-43(July 2010). This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. Quotation shall include the company Tax Information Number and DUNS Number. All responsible sources may submit a quotation, which if timely received, shall be considered by this agency. The NAICS code for this solicitation is 333923 and the small business size standard is 500 employees. The following FAR clauses apply to this solicitation. Offerors may obtain full text versions of these clauses electronically at http://www.arnet.gov/far FAR 52.204-7 CCR Registration (Apr 2008). FAR 52.212-1 Instructions to Offerors-Commercial Items (Jun 2008). 52.212-2 Evaluation-Commercial Items-Pricing consideration and past performance are evaluation factors (Jan 1999). FAR 52.212-3 Offeror Representations and Certifications-Commercial Items (Aug 2009) with Alt 1 included. FAR 52.212-4 Contract Terms and Conditions-Commercial Items (Oct 2009). FAR 52.212-5 Contract Terms and Conditions Required to Implement Statues or Executive Orders, Commercial Items (JUL 2010). The following clauses listed in 52.212-5 are incorporated: 52.222-3 Convict labor (June 2003) (E.O. 11755); 52.222.19 Child Labor-Cooperation with Authorities and Remedies (Aug 2009) (EO 13126); 52.222-21, Prohibition of Segregated Facilities (Feb 1999); 52.222-26 Equal Opportunity (Mar 2007)(E.O. 11246); 52.222-36 Affirmative Action for Workers with Disabilities (JUN 1998)(29 U.S.C. 793);52.225-3 Buy American Act-Free Trade Agreement Israeli Trade Act (Jun 2009) 52.225-13,Restrictions on Certain Foreign Purchases (Jun 2008) (E.o.s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).; 52.232-33 Payment by Electronic Funds Transfer Central Contractor Registration (Oct 2003)(21 U.S.C. 3332). The following items are incorporated as addenda to this solicitation: HSAR 3052.209-70 Prohibition on Contracts with Corporate Expatriates (Jun 2006); HSAR 3052.242-72 Contracting Officer Technical Representative (Dec 2003). CGAP 3042.302-90 Valuation Requirements for the Acquisition of Spare Parts Purchased for Inventory Control Points from HQ Contracts (Oct 2008). Copies of HSAR clauses may be obtained electronically at http://www.dhs.gov http://www.dhs.gov/
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DHS/USCG/USCGELC/HSCG40-10-Q-AN031/listing.html)
- Record
- SN02217671-W 20100728/100726235026-e96ec7c7ef92ae63b1aec8398ce240e7 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |