SOURCES SOUGHT
56 -- Portable Asphalt Reclaimer
- Notice Date
- 7/21/2010
- Notice Type
- Sources Sought
- NAICS
- 333120
— Construction Machinery Manufacturing
- Contracting Office
- Department of Energy, National Security Technologies LLC (DOE Contractor), National Security Technologies LLC, PO Box 98521, Las Vegas, Nevada, 89193
- ZIP Code
- 89193
- Solicitation Number
- 218195-SH-10
- Archive Date
- 8/11/2010
- Point of Contact
- Sheppy, Phone: 702-295-3060, Alta R McDowell, Phone: 702.295.5029
- E-Mail Address
-
herskosd@nv.doe.gov, mcdowear@nv.doe.gov
(herskosd@nv.doe.gov, mcdowear@nv.doe.gov)
- Small Business Set-Aside
- Total Small Business
- Description
- General: This specification describes a portable, diesel engine powered, asphalt reclaiming or trenching machine that mounts to the front bucket of a loader with min. 2.5 cubic yard capacity, such that the machine does not interfere with the top or sides of the bucket. Engine Water-Cooled, Six-Cylinder Tier 3 EPA compliant, Diesel John Deere, or Equal, Capable of using B20 Biodiesel 2010 Model Year or Newer 12-Volt Electric System to Include Starter, Maintenance Free Battery, and Alternator. Min. 40 Gallon Capacity Fuel Tank Remote, Wireless (for locating inside Loader Cab) Engine Instrument Panel, including: Tachometer Engine Emergency Stop Button Digital Multifunction Display to Selectively Display at a Minimum: Fuel Level, Percent Engine Loading, Engine Run Hours, Engine Oil Pressure and Temperature, System Voltage Engine Control Panel, Located on Machine to Include Controls for: Cutting Depth Engine Throttle Key Switch Controlling Engine On/Off/Start Maintenance Hatch Control Engine Emergency Stop Button Cutter Head: Capable of Max. 12" Cutting Depth Max. 48" Cutting Width Securely Attached to Engine Frame Fully Enclosed in Protective Cowling Min. of 130 Snap-in Bits that Insert into Standard Blocks are Securely Welded to Skin of Cutter Head Designed Such That Only Completely Pulverized Material Leaves the Assembly Cutting Head Drive Shall Have the Following Features: V-Belt Driven, Planetary Reduction Gear Box Belt Tension Regulated by Idler Wheel and Air Bag Air Bag Pressure Gauge Shall Be Visible from Safe Distance on Ground Hydraulic System: Consisting of Gear Pump, Powered by the Engine, Through An Auxiliary Drive Adapter Hydraulic Reservoir Pressure Side Filter Manifold with Center Valves, Lines and Two Cylinders to Control the Cutting Depth Hydraulic Bucket Clamping System to Securely Attach Machine to Loader Bucket Maintaining 1500 psi with Pressure Relief Valve Hydraulic System to Allow Access to the Cutting Head for Maintenance and Inspection, Capable of Operation WITHOUT Diesel Engine Running The Portable Reclaimer Shall Have the Following: A Front Skirt to support the machine during operation, adjustable to control the cutting depth, reducing the amount of ejected material, allowing for addition of other material to be mixed in with the pulverized asphalt. Mounting to Loader. Mounting system to allow for direct removal of reclaimer from transport trailer with loader without other equipment. Mounting to loader shall not require the removal of the bucket, or separate quick connect hooks or attachment pins. Transport Trailer. The approved reclaimer manufacturer shall supply tandem axle trailer specifically designed to support the transport of the machine and optional containment system at highway speeds. Trailer to be constructed of steel channel, rectangular steel tubing, or I-beam with all welded construction. Shall be equipped with electric brakes and automatic break away system in accordance with current ICC requirements. Trailer to have four independent attachment points to secure the machine to the trailer using grade 70 transport chains and ratchet style load binders. Shall include lockable tool box and tongue jack. Shall have all lights and reflectors to comply with U.S. Federal DOT and ICC requirements. Standard wiring connectors and 2 5/16" minimum trailer hitch size. Detachable Containment System or Grind Box. Unit shall be equipped with a system that allows for consistent pulverization of various materials (shallow or cracked asphalt, chip seal, etc.). Containment system shall be adjustable, allowing for finer or coarser grades of reclaimed material. System must be easily detachable (i.e. minimal tools or equipment required) from the main unit. System shall allow for a maximum 4" cutting depth. Portable Water System. Unit shall supplied with a system (mounted to the loader) to supply a min. 150 gallons of water for dust control and compaction. System to include 50' hose, manual drain valve, in line water filter. Shall operate on 12-volts, produce 40 psi and 3-5 gallons/minute. Shall contain an adapter plate that attaches to either a pintle hitch or backhoe adapter. Machine shall be capable of cutting a minimum of 700' per hour in six-inches deep or less of standard asphalt. Color: Unit and Trailer shall have all exposed surfaces painted or powder coated with the manufacturer's standard colors, ensuring that all signs, warning labels, and tags are visible. The manufacturer shall supply a minimum of 800 replacement bits with washers for the cutting head. Training: The manufacturer shall furnish an introductory class at delivery covering operating, servicing, and maintaining of the equipment by a qualified representative. Manufacturer shall include three (3) sets of spare (starter) parts including: bits, air filter, fuel filter, oil filter and gear oil. Manufacturer shall include three (3) copies each of the operating, service, and maintenance manuals covering both the diesel engine and reclaimer. Manufacturer shall include two (2) sets of keys for the reclaimer and trailer toolbox. Manufacturer shall include one (1) set of spare parts (oil, air, hydraulic, and fuel filters, and belts). Manufacturer shall supply tools for changing cutter bits and a supply of five blocks and twenty five cutter bits.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DOE/BNC/BV/218195-SH-10/listing.html)
- Place of Performance
- Address: Nevada Test Site, Mercury, Nevada, 89023, United States
- Zip Code: 89023
- Zip Code: 89023
- Record
- SN02212353-W 20100723/100721234725-e57c662c38e1a90f5e2e95e6cac6b79a (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |