SOLICITATION NOTICE
34 -- ACCURPRESS
- Notice Date
- 6/23/2010
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 333518
— Other Metalworking Machinery Manufacturing
- Contracting Office
- NASA/Dryden Flight Research Center, Code A, P.O. Box 273, Edwards, CA 93523-0273
- ZIP Code
- 93523-0273
- Solicitation Number
- NND10344395Q
- Response Due
- 7/8/2010
- Archive Date
- 6/23/2011
- Point of Contact
- Cynthia Garcia, Contracting Officer, Phone 661-276-2592, Fax 661-276-2904, Email Cynthia.M.Garcia@nasa.gov - Gail Anton, Acquisition Support Specialist, Phone 661-276-5417, Fax 661-276-2243, Email gail.anton-1@nasa.gov
- E-Mail Address
-
Cynthia Garcia
(Cynthia.M.Garcia@nasa.gov)
- Small Business Set-Aside
- Total Small Business
- Description
- NASA/DFRC has a requirement for quantity 1 band name or equal to Accurpress withoptions.The specifications are:Model # 717510, 175 ton x 10' press brake. - Side mounted hydraulics allows maximum accessibility to back of press brake whenforming with long 'up' or 'down' flanges- Low noise submerged hydraulic pump- Beam construction reduces bed deflection for optimal part quality and reduces need forpit on larger machines- Power ram tilt, enables easy tilting of ram for doing fade work and allows compensationfor warn press brake dies - Maintenance free contruction- sealed bearings utilized- Ram depth settings- Tonnage limits- Ram tilt adjustment- Inch or metric readout- Ram delay at bend points (dwell for more accurate bends)- Ram control for upper limit- Slow down point- Lower limit- Memory for 15 different ram position settings decreases set-up time for commonly runjobs and foot or two-hand selector switch - Travel 24'- Program memory 3,000 part programs- 100 tool sets- 50 steps/program- Drive system dual ball screws- Vertical adjustment- 10' manual or through optional R azis- Positioning speed 1500 inches/minute- Repeatability +/-0.001'- Positioning accuracy +/-0.001'- Depth and bend resoution +/0.001' or +/-0.1- Holding force 750lbs- Features programming via hig resolution 15' TFT active matrix screen. - Operator prompts and on line help messages. - Y axis programmed via degrees- Off line porgram storage via RS-232 or 3.5 disk- Off line program storage via network, RS-232- 3.5' floppy or USB flasy memory stick1 each: Adustable bend speed control. Gives the ability to mechanically adjust thebending speed of the ram.1 each: Machine groove in bed 10' long. allows ability to put botton dies directly on thebed of the machine for deep box bending applications.1 each: 2'horn extension added to the left side of the machine. Allows extra length ofmachine and also the ability to bend cones that wrap around the horn not to interferewith the ram. 1 each: Ets-3000 P10 premium backgauge with 2 axis CNC control. Premium style backguagewith X Axis automatic, ETS 3000 CNC Computer Control and ETS pedestal control included.1 each: Automatic Backgauge R-Axis (3rd Axis)1 each: Automatic Backguage Z1,Z2 Axis (4th and 5th Axis)1 each: 3'x3'x10' bottom die holder rail.This notice is a combined synopsis/solicitation for commercial items prepared inaccordance with the format in FAR Subpart 12.6, as supplemented with additionalinformation included in this notice. This announcement constitutes the onlysolicitation, which is issued as a Request for Quotation (RFQ); quotes are beingrequested and a written solicitation will not be issued. Offerors are required to usethe On-Line RFQ system to submit their quote. The On-line RFQ system is linked above orit may be accessed at http://prod.nais.nasa.gov/cgi-bin/eps/bizops.cgi?gr=C&pin=. Theinformation required by FAR Subpart 12.6 is included in the on-line RFQ.The Government intends to acquire a commercial item using FAR Part 12 and the SimplifiedAcquisition Procedures set forth in FAR Part 13.Questions regarding this acquisition must be submitted in writing (e-mail is preferred)no later than 4:30pm local time on July 2, 2010. Quotes/Proposal are due no later than4:30pm local time on July 8, 2010. It is the quoter's responsibility to monitor this sitefor the release of amendments (if any). Potential quoters will be responsible fordownloading their own copy of this notice, the on-line RFQ and amendments (if any).An ombudsman has been appointed - See NASA Specific Note 'B'.Any referenced notes may be viewed at the following URLs link below.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/NASA/DFRC/OPDC20220/NND10344395Q/listing.html)
- Record
- SN02186496-W 20100625/100623235527-db5b86531e316c4b079ce2d14ea75ae3 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |