Loren Data's SAM Daily™

FBO DAILY ISSUE OF APRIL 23, 2010 FBO #3072
SOLICITATION NOTICE

39 -- NESTABLE / STACKABLE PLASTIC TOTES

Notice Date

4/21/2010
 

Notice Type

Combined Synopsis/Solicitation
 

NAICS

326199 — All Other Plastics Product Manufacturing
 

Contracting Office

Defense Logistics Agency, DLA Acquisition Locations, Defense Distribution Center, 2001 Mission Drive, DDC CSS-AB, Bldg 404, New Cumberland, Pennsylvania, 17070-5001, United States
 

ZIP Code

17070-5001
 

Solicitation Number

SP3300-10-Q-0046
 

Archive Date

5/21/2010
 

Point of Contact

Angel D. Maldonado-Rodriguez, Phone: 7177704074
 

E-Mail Address

angel.maldonado@dla.mil
(angel.maldonado@dla.mil)
 

Small Business Set-Aside

N/A
 

Description

The Defense Distribution Depot, Susquehanna, PA (DDSP) has a requirement for nestable and stackable high density polyethylene totes. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6 in conjunction with 13 of the Federal Acquisition Regulations (FAR) as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. This is a Request for Quote (RFQ) and the solicitation number is SP3300-10-Q-0046. This notice incorporates provisions and clauses in effect through Federal Acquisition Circular (FAC) 2005-39 effective 19 APR 2010 and Defense Federal Acquisition Regulation Supplement (DFARS) DCN 20100408 (Amended) Edition and Defense Logistics Acquisition Directive (DLAD) Current to Revision 5 and PROCLTR 2010-02 & (2009-61, 62 & 63). The complete text of any of the clauses and provisions may be accessed in full text at http://farsite.hill.af.mil. This solicitation is unrestricted. The NAICS code applicable to this acquisition is 326199 and the size standard is 500 employees. The requirement consists of the following: CLIN 0001 – TOTE, NESTABLE AND STACKABLE, HIGH DENSITY POLYETHYLENE (HDPE), OUTSIDE DIMENSIONS: 27"L X 16.88"W X 12.5"H, TEXTURED SOLID BOTTOM, RED COLOR, NO LID, BUCKHORN PART NUMBER 271712 AR0202000, OR EQUAL. TOTE SHALL BE COMPATIBLE AND NESTABLE/STACKABLE WITH GOVERNMENT OWNED BUCKHORN TOTES (BUCKHORN MOLD NUMBER 1691). 5,000 EACH @ $_______________ EACH = $_______________ TOTAL PROPOSED DELIVERY SCHEDULE: ______________________________________ NOTE: A SAMPLE TOTE SHALL BE REQUIRED TO BE DELIVERED 7-14 DAYS AFTER RECEIPT OF ORDER FOR APPROVAL BY THE GOVERNMENT POINT OF CONTACT PRIOR TO SHIPMENT. Delivery point is FOB DESTINATION to Defense Distribution Depot Susquehanna, BASE SUP EBS Bldg. 203 Door 12, 5450 Carlisle Pike, Mechanicsburg, PA 17050-2411. Any award resulting from this solicitation will be issued on a Standard Form (SF) 1449. Payment for supplies under this order will be made by the Acquisition Operations Office via the Government Purchase Card (VISA). NOTE: Since all payments under this purchase order will be made via the Government Purchase Card, the Contractor must accept the VISA Credit Card for payment of all supplies ordered under this purchase order. The following FAR and DFARS clauses and provisions apply to this acquisition: FAR 52.212-1 Instructions to Offers-Commercial Items. Addenda to 52.212-1; the following paragraphs are hereby deleted from this provision: (d) products samples, (e) multiple offers and (h) multiple awards. FAR 52.211-6 - BRAND NAME OR EQUAL (AUG 1999) (a) If an item in this solicitation is identified as “brand name or equal,” the purchase description reflects the characteristics and level of quality that will satisfy the Government’s needs. The salient physical, functional, or performance characteristics that “equal” products must meet are specified in the solicitation. (b) To be considered for award, offers of “equal” products, including “equal” products of the brand name manufacturer, must— (1) Meet the salient physical, functional, or performance characteristic specified in this solicitation; (2) Clearly identify the item by— (i) Brand name, if any; and (ii) Make or model number; (3) Include descriptive literature such as illustrations, drawings, or a clear reference to previously furnished descriptive data or information available to the Contracting Officer; and (4) Clearly describe any modifications the offeror plans to make in a product to make it conform to the solicitation requirements. Mark any descriptive material to clearly show the modifications. (c) The Contracting Officer will evaluate “equal” products on the basis of information furnished by the offeror or identified in the offer and reasonably available to the Contracting Officer. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer. (d) Unless the offeror clearly indicates in its offer that the product being offered is an “equal” product, the offeror shall provide the brand name product referenced in the solicitation. (End of Provision) NOTE: To receive an award resulting from this solicitation, offerors MUST be registered in the Central Contractor Registration (CCR) database IAW FAR 52.212-1(k) and DFARS 204.1104. Registration may be done on line at: www.ccr.gov. DLAD 52.233-9000 AGENCY PROTESTS (SEP 1999) Companies protesting this procurement may file a protest 1) with the Contracting Officer, 2) with the General Accounting Office, or 3) pursuant to Executive Order No. 12979, with the Agency for a decision by the Activity’s Chief of the Contracting Office. Protests filed with the agency should clearly state that they are an “Agency Level Protest under Executive Order No. 12979.” (Note: DLA procedures for Agency Level Protests filed under Executive Order No. 12979 allow for a higher level decision on the initial protest than would occur with a protest to the Contracting Officer; this is not an appellate review of a Contracting Officer’s decision on a protest previously filed with the Contracting Officer). Absent a clear indication of the intent to file an agency level protest, protests will be presumed to be protests to the Contracting Officer. (End of Provision) DLAD 52.233-9001 DISPUTES: AGREEMENT TO USE ALTERNATIVE DISPUTE RESOLUTION (ADR) (JUN 2001) (a) The parties agree to negotiate with each other to try to resolve any disputes that may arise. If unassisted negotiations are unsuccessful, the parties will use alternative dispute resolution (ADR) techniques to try to resolve the dispute. Litigation will only be considered as a last resort when ADR is unsuccessful or has been documented by the party rejecting ADR to be inappropriate for resolving the dispute. (b) Before either party determines ADR inappropriate, that party must discuss the use of ADR with the other party. The documentation rejecting ADR must be signed by an official authorized to bind the contractor (see FAR 52.233-1, or for the agency, by the Contracting Officer, and approved at a level above the Contracting Officer after consultation with the ADR Specialist and with legal counsel (see DLA Directive 5145.1). Contractor personnel are also encouraged to include the ADR Specialist in their discussions with the Contracting Officer before determining ADR to be inappropriate. (c) If you wish to opt out of this clause, check here ( ). Alternate wording may be negotiated with the Contracting Officer. (End of Provision) OFFER SUBMISSION INSTRUCTIONS–Quotes must include the following items. Submission of a quote that does not contain all items requested below may result in elimination from consideration for award. 1. Quotations may be submitted in contractor format and shall include: (1) Company name, address, telephone number, e-mail address, and FAX number; (2) Solicitation number; (3) Unit Price and extended prices for all CLINS; (4) Contractor DUNS Number and Commercial and Government Entity (CAGE) Code, (5) Signed acknowledgements of amendments (applicable only if any amendments are issued against this solicitation) 2. Contractors are required to include a copy of the FAR provision 52.212-3-Offeror Representations and Certifications-Commercial Items and DFAR 252.212-7000-Offeror Representation and Certification-Commercial Items with its proposal or may indicate completion of the representations and certifications on the internet at http://orca.bpn.gov. Failure to include the certifications along with the price proposal or to complete the certifications on the internet may result in elimination from consideration for award. FAR 13-106-2 Evaluation of Quotations or Offers. The Government intends to evaluate quotes in response to this quotation without discussions and will award one firm-fixed price contract to the responsible offeror whose quote represents the lowest price technically acceptable offer. Therefore to be considered for award offerors are required to submit descriptive literature that clearly indicates the product offered meets the minimum requirements/salient characteristics and compatibility with Buckhorn totes. This information will be used to determine technical acceptability. Technical information shall be evaluated on a go/no go basis and will not be rated. Any offeror who has been determined acceptable (go) on their technical information will then have its quote evaluated for price. TECHNICAL INFORMATION: Contractors must submit technical information which clearly indentifies the proposed nestable / stackable totes. The contractor must submit descriptive literature. "Descriptive literature" for this solicitation means catalog cuts, illustrations, drawings, pictures, brochures or a web address that contains applicable product information. Descriptive Literature is required to establish, for the purpose of evaluation and award, details of the products offered that are specified elsewhere in the solicitation and pertain to significant elements such as (1) design; (2) materials; (3) components; (4) performance characteristics; and (5) methods of manufacture, assembly, construction, or operations. The term includes only information required to determine the technical acceptability of the offered product. FAR 52.212-4 Contract Terms and Conditions–Commercial Items. Addenda to 52.212-4; the following clauses apply: FAR 52.247-34 FOB Destination FAR 52.212-5 Contract Terms and Conditions Required to Implement Statutes of Executive Orders–Commercial Items (in paragraph (b) the following clauses apply: FAR 52.219-28 Post Award Small Business Program Representation FAR 52.222-3 Convict Labor FAR 52.222-19 Child Labor–Cooperation with Authorities and Remedies FAR 52.222-21 Prohibition of segregated facilities FAR 52.222-26 Equal Opportunity FAR 52.222-36 Affirmative Action for Workers with Disabilities FAR 52.225-13 Restriction on Certain Foreign Purchases FAR 52.232-36 Payment by Third Party DFARS 252.212-7001 Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisitions of Commercial Items. The following additional clauses/provisions apply: DFARS 252.203-7000 Requirements Relating to Compensation of Former DoD Officials DFARS 252.225-7036 Buy American Act --Free Trade Agreement--Balance of Payments Program ALT I DFARS 252.247-7023 Transportation of Supplies by Sea ALT III DLAD 52.247-9012 REQUIREMENTS FOR TREATMENT OF WOOD PACKAGING MATERIAL (WPM) (FEB 2007) (a) This clause only applies when wood packaging material (WPM) will be used to make shipments under this contract and/or when WPM is being acquired under this contract. (b) Definition. Wood packaging material (WPM) means wood pallets, skids, load boards, pallet collars, wooden boxes, reels, dunnage, crates, frame and cleats. The definition excludes materials that have undergone a manufacturing process, such as corrugated fiberboard, plywood, particleboard, veneer, and oriented strand board (OSD). (c) All Wood Packaging Material(WPM) used to make shipments under DOD contracts and/or acquired by DOD must meet requirements of International Standards for Phytosanitary Measures (ISPM) 15, "Guidelines for Regulating Wood Packaging Materials in International Trade." DOD shipments inside and outside of the United States must meet ISPM 15 whenever WPM is used to ship DOD cargo. (1) All WPM shall comply with the official quality control program for heat treatment (HT) or kiln dried heat treatment (KD HT) in accordance with American Lumber Standard Committee, Incorporated (ALSC) Wood Packaging Material Program and WPM Enforcement Regulations (see http://www.alsc.org/). (2) All WPM shall include certification/quality markings in accordance with the ALSC standard. Markings shall be placed in an unobstructed area that will be readily visible to inspectors. Pallet markings shall be applied to the stringer or block on diagonally opposite sides of the pallet and be contrasting and clearly visible. All containers shall be marked on a side other than the top or bottom, contrasting and clearly visible. All dunnage used in configuring and/or securing the load shall also comply with ISPM 15 and be marked with an ASLC approved DUNNAGE stamp. (d) Failure to comply with the requirements of this restriction may result in refusal, destruction, or treatment of materials at the point of entry. The Agency reserves the right to recoup from the Contractor any remediation costs incurred by the Government. (End of Clause) Offerors responding to this announcement shall submit their quotations via FAX to Angel Maldonado, 717-770-4074 or e-mail to angel.maldonado@dla.mil. All quotes must be received by May 5, 2010 AT 3:30 PM EST to be considered for award.
 

Web Link

FBO.gov Permalink
(https://www.fbo.gov/spg/DLA/J3/DDC/SP3300-10-Q-0046/listing.html)
 

Place of Performance

Address: DEFENSE DISTRIBUTION CENTER SUSQUEHANNA, MECHANICSBURG, Pennsylvania, 17050, United States

Zip Code: 17050
 

Record

SN02128746-W 20100423/100421235344-04ad8abcaba9e62b50a60cfd6a752ec5 (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |