SOLICITATION NOTICE
66 -- INJECTION SEEDER
- Notice Date
- 4/20/2010
- Notice Type
- Presolicitation
- NAICS
- 334510
— Electromedical and Electrotherapeutic Apparatus Manufacturing
- Contracting Office
- NASA/Glenn Research Center, 21000 Brookpark Road, Cleveland, OH 44135
- ZIP Code
- 44135
- Solicitation Number
- NNC10337045Q
- Response Due
- 5/5/2010
- Archive Date
- 4/20/2011
- Point of Contact
- Nancy M. Shumaker, Purchasing Agent, Phone 216-433-2133, Fax 216-433-2480, Email Nancy.M.Shumaker@nasa.gov
- E-Mail Address
-
Nancy M. Shumaker
(Nancy.M.Shumaker@nasa.gov)
- Small Business Set-Aside
- N/A
- Description
- NASA/GRC has a requirement for two Injection Seeders in accordance with thefollowing specifications:This procurement is for an injection seed laser to a frequency-tripled Nd:YAG laser(1064-nm fundamental, 355-nm output wavelength) and shall possess the followingcharacteristics, like NP Photonics' The Rock High Power Laser Source, or equal:1. Output Power 500 mW, 1-5 Watt2. Longitudinal Mode Single Frequency3. Spectral Line Width (Heterodyne) <5 kHz4. Frequency Stability <50 MHz with over 1 hour with base temperature constant towithin <2 degrees C after 30 min warm-up5. Relative Intensity Noise (RIN) @ Peak ~ 1 MHz <-110 dB/Hz for 1550 nm,<-100dB/Hz for 1 um6. Relative Intensity Noise (RIN) >50 MHz Shot Noise Limited7. Signal to ASE Noise Ratio (50 pm, bandwidth) >55 dB8. Signal to ASE Noise Ratio (Integrated) >35 dB9. Side Mode Suppression Ratio (SMSR) >50 dB10. Polarization Extinction Ratio (PER) >17 dB11. Tuning Range (Thermal) greater than or equal to 30 GHz12. Fast Frequency Modulation Range greater than or equal to 150 MHz13. Modulation Speed Up to 30 kHz14. Power Stability plus or minus 1%15. Output Termination Connectors Collimator or FC/APC connector16. Fiber Pigtail PM Fiber, 1 m LongThe seeder is to be installed on-site at NASA Glenn Research Center. Overall systemperformance will be verified on-site at GRC.NASA/GRC intends to purchase the items from Continuum as they are the original lasermanufacturer of our existing Cotinuum Nd:YAG-pumped OPO laser systems and the onlyknowledgeable source for the parts that are required to retrofit the laser with aninjection seeder.The Government intends to acquire a commercial item using FAR Part 12.Interested organizations may submit their capabilities and qualifications to perform theeffort in writing to the identified point of contact not later than 4:30 p.m. local timeon 05/04/2010.Such capabilities/qualifications will be evaluated solely for the purposeof determining whether or not to conduct this procurement on a competitive basis. Adetermination by the Government not to compete this proposed effort on a full and opencompetition basis, based upon responses to this notice, is solely within the discretionof the government.Oral communications are not acceptable in response to this notice.All responsible sources may submit an offer which shall be considered by the agency.An Ombudsman has been appointed. See NASA Specific Note 'B'.Any referenced notes may be viewed at the following URLs linked below.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/NASA/GRC/OPDC20220/NNC10337045Q/listing.html)
- Record
- SN02127322-W 20100422/100420235543-53948b987096a9fd567efc38587022cb (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |